user_1633172457

Chaosdrucker

Update 31.5.23 Bebilderte Anleitung wird gerade erstellt und nach und nach hinzugefügt Die Caliburn Durch Zufall bin ich vor einigen Wochen auf die Caliburn gestoßen. Mußte da aber feststellen das diese als US Version mit allerhand Zeugs gebaut wurde, was hier in Deutschland nicht oder nur schwer verfügbar ist. Außerdem paßten die ganzen Teile nicht richtig, waren zu eng oder der Übergang der einzelnen Teile war nicht schön. Also habe ich alle Teile einmal angepaßt für Zeugs was ich noch herumliegen hatte, bzw. man fast alles auch im Baumarkt bekommt. Herausgekommen ist meine Version der Caliburn. Videoanleitung: 3D gedruckter Blaster- Caliburn <a href="https://youtu.be/Dywl6gKxQHU" rel="nofollow">https://youtu.be/Dywl6gKxQHU</a>&nbsp;HINWEIS! Bitte diesen Blaster recht Farbenfroh drucken damit er sich sehr stark von echten Waffen unterscheidet. Nicht auf Personen schießen! ALLE TEILE SIND VON MIR AKTUELL AUF ABS(x) (Nobufil) ANGEPAßT!WENN ICH IN DER BOM NOCH ETWAS VERGESSEN HABEN SOLLTE, BITTE BESCHEID GEBEN, DANN FÜGE ICH DAS NOCH EIN.&nbsp;BOM<ul><li>6x M6 Gewindestange 320mm - <a href="https://shorturl.at/agoK9" rel="nofollow">https://shorturl.at/agoK9</a></li><li>1x M6 Gewindestange 190mm - <a href="https://shorturl.at/agoK9" rel="nofollow">https://shorturl.at/agoK9</a></li><li>1x M6 Gewindestange 95mm - <a href="https://shorturl.at/agoK9" rel="nofollow">https://shorturl.at/agoK9</a> </li><li>3x Alurohr 8x1mm 286mm - <a href="https://shorturl.at/clmKO" rel="nofollow">https://shorturl.at/clmKO</a></li><li>1x Alurohr 8x1mm 151mm - <a href="https://shorturl.at/clmKO" rel="nofollow">https://shorturl.at/clmKO</a></li><li>1X Alurohr 15x1 355mm - <a href="https://shorturl.at/otC78" rel="nofollow">https://shorturl.at/otC78</a></li><li>2x 2x15mm Flachstange Aluminium 380mm - <a href="https://shorturl.at/xJPZ9" rel="nofollow">https://shorturl.at/xJPZ9</a> </li><li>Acrylröhre 40/36 - <a href="https://amzn.to/42qX1EE" rel="nofollow">https://amzn.to/42qX1EE</a> - 1x 185mm - 1x 75mm (könnte man auch drucken) </li><li>2x Dichtringe 36/30 (3mm) <a href="https://amzn.to/424KRkT" rel="nofollow">https://amzn.to/424KRkT</a></li><li>2-3x Dichtringe 13/10 (1,5mm) <a href="https://amzn.to/41congl" rel="nofollow">https://amzn.to/41congl</a> </li><li>1x Filzgleiter 33x6mm <a href="https://shorturl.at/cpzP2" rel="nofollow">https://shorturl.at/cpzP2</a> </li><li>1x Feder <a href="https://shorturl.at/akyB8" rel="nofollow">https://shorturl.at/akyB8</a> (Muß leicht gekürzt werden mit dem Dremel.) </li><li>2x Zugfeder <a href="https://amzn.to/3LBrKHX" rel="nofollow">https://amzn.to/3LBrKHX</a> </li><li>14x M3 Einschmelzmuttern (Voron) <a href="https://amzn.to/427v0lp" rel="nofollow">https://amzn.to/427v0lp</a></li><li>17x M6 Muttern <a href="https://amzn.to/3pdGcyi" rel="nofollow">https://amzn.to/3pdGcyi</a> </li><li>2x M3x50 <a href="https://amzn.to/3HHXiLn" rel="nofollow">https://amzn.to/3HHXiLn</a></li><li>5x M5x10mm Linsenkopf <a href="https://amzn.to/3ASXpjo" rel="nofollow">https://amzn.to/3ASXpjo</a></li><li>5x M5 Muttern <a href="https://amzn.to/3HHXwlH" rel="nofollow">https://amzn.to/3HHXwlH</a></li><li>2x M3x8mm <a href="https://amzn.to/3NO8idI" rel="nofollow">https://amzn.to/3NO8idI</a></li><li>2x M3x20 Senkkopf <a href="https://amzn.to/44Hvfpg" rel="nofollow">https://amzn.to/44Hvfpg</a></li><li>2x M3x8mm Senkkopf <a href="https://amzn.to/411OB5b" rel="nofollow">https://amzn.to/411OB5b</a></li><li>3x M3x35 <a href="https://amzn.to/3LyqHZq" rel="nofollow">https://amzn.to/3LyqHZq</a></li><li>1x M3x20 <a href="https://amzn.to/41bwFFo" rel="nofollow">https://amzn.to/41bwFFo</a></li><li>1x M6x30mm </li><li>Passstift 3x12mm <a href="https://amzn.to/427TB9K" rel="nofollow">https://amzn.to/427TB9K</a></li><li>Magazin (10x) <a href="https://amzn.to/3VCkmB1" rel="nofollow">https://amzn.to/3VCkmB1</a> (Das 6er was ich da nutze finde ich aber optisch passender)</li><li>Darts 400x <a href="https://amzn.to/3LD5D3U" rel="nofollow">https://amzn.to/3LD5D3U</a></li></ul>&nbsp;&nbsp;PRINT SETTINGS5/5/5/35% GITTER 0.2 ABS &nbsp;&nbsp;Meine Farben sind: <ul><li>Nobufil ABSx Candy Green <a href="https://www.nobufil.com/product-page/abs-filament-candy-green" rel="nofollow">https://www.nobufil.com/product-page/abs-filament-candy-green</a> </li><li>Nobufil ABSx Astro Black <a href="https://www.nobufil.com/product-page/abs-filament-astro-black" rel="nofollow">https://www.nobufil.com/product-page/abs-filament-astro-black</a> </li><li>Nobufil ABSx Marble White <a href="https://www.nobufil.com/product-page/abs-filament-marble-white" rel="nofollow">https://www.nobufil.com/product-page/abs-filament-marble-white</a> </li><li>Nobufil ABSx Neon Orange <a href="https://www.nobufil.com/product-page/abs-filament-neon-orange" rel="nofollow">https://www.nobufil.com/product-page/abs-filament-neon-orange</a></li></ul><h3>Gutschein Code „ChaosCrew„ auch bei nobufil einsetzbar. (Wie bei vielen anderen übrigens auch - einfach immer wieder mal ausprobieren.) </h3>&nbsp;<h3>Anleitung:</h3>Schritt 1: Alle Einschmelzmuttern setzen. <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/107496/2023-10-21_71dipkd9prfr.jpeg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/107496/2023-10-21_eqlv336klwpg.jpeg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/107496/2023-10-21_ctnj8a3ea7fh.jpeg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/107496/2023-10-21_7oxwcx8e4j5f.jpeg"></figure>—————————————————————————————Schritt 2: M6 Mutten und erste Gewindestangen einsetzen.Untere Muttern schräg nach unten einschieben, die obere kann gerade von oben eingeschoben werden. Die unteren Stangen mehr oder weniger bis Anschlag hinein drehen und die obere Stange ungefähr danach ausrichten. <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/107496/2023-10-21_00opx8g2jo66.jpeg"></figure>—————————————————————————————Schritt 3: Die Hülsen (Verkleidungen der Gewindestangen) anbringen. Dazu einfach die D8 Röhren über die Gewindestangen stecken. <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/107496/2023-10-21_kv9etvkpuhl4.jpeg"></figure>—————————————————————————————Schritt4: Die Aluminium Flachstäbe an den Pumplader anschrauben. Die vorderen Löcher 7,5 von vorne und mittig auf dem Flachstab bohren (auch 7,5mm). Da kommt eine M5x10 Linsenkopf durch also bitte auch mindestens mit 5mm bohren. Von innen dann mit einer MutTür sichern. Das zweite Loch ergibt sich dann - ist aber glaube dann von Mitte Loch zu Mitte Loch bei 76mm. Bitte Prüfen! Nicht einfach übernehmen. So festschrauben das die Stäbe nach hinten - zur geraden Seite rausgehen. Auch das hintere Loch sollte bei 7,5/7,5mm gebohrt werden. Von hinten vielleicht auch minimal weniger aber nicht mehr, da es sonst nicht auf den Kolben paßt. <img src="https://makerworld.bblmw.com/makerworld/draft/107496/2023-10-21_o98i5j3z3ey7.jpeg">—————————————————————————————Schritt 5: Pumplader einfädeln. Stecke das ganze so durch das Mittelteil das die Stäbe hinten wieder rausschauen. <img src="https://makerworld.bblmw.com/makerworld/draft/107496/2023-10-21_klian403o8ec.jpeg">—————————————————————————————Schritt 6: Vordere KlemmungDas erste Teil der vorderen Spitze anbringen und mit 3 Muttern sichern. <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/107496/2023-10-21_oya7olrofgvv.jpeg"></figure>—————————————————————————————Schritt 7: Schußrohr Von vorne das 15x1mm Rohr bis Anschlag im Mittelteil einschieben und mit der M5 Schraube und Mutter klemmen. Nicht zu fest anziehen! Nur leicht, leichtes klemmen reicht. <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/107496/2023-10-21_ku4010in0yul.jpeg"></figure>—————————————————————————————Schritt 8: Spitze fertig machenDas mittlere Teil der Spitze aufstecken und mit einer M3x8 Schraube sichern. Danach die Spitze aufstecken und auch wieder mit einer M3x8mm Schraube sichern. Damit ist der vordere Teil des Blaster fertig. <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/107496/2023-10-21_uectujhygko6.jpeg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/107496/2023-10-21_rtya8rv9k4ui.jpeg"></figure>—————————————————————————————Sollte jetzt so aussehen: <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/107496/2023-10-21_j7sa4uumb1l5.jpeg"></figure>—————————————————————————————Schritt 9: Ausstoßer Kolben anbringenDen gedruckten Kolben auf die Stangen auffädeln und mit M3x8 Senkkopf oder Linsenkopf befestigen. Dichtring auf dem Kolben aufziehen und am besten auch gleich ein wenig einfetten. <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/107496/2023-10-21_oawpnqn3rqub.jpeg"></figure>—————————————————————————————Schritt 10: Hinteren Gewinde anbringenWieder zwei M6 Muttern einschieben und die Gewindestangen bis ca. Mittig von der Querbohrung einschrauben. Auf der hinteren Seite die vier Passstifte einsetzen. <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/107496/2023-10-21_xs6av73b3zec.jpeg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/107496/2023-10-21_hhnjfg3eg8vr.jpeg"></figure>—————————————————————————————Schritt 11: Magazin Trigger einsetzen. Fedele eine der kleinen Zugfedern oben im Magazinhalter ein und die andere Lasche in den Trigger. Danach den Trigger so einfädeln das die offene Seite nach Links zeigt und die Löcher übereinander liegen damit man es mit einer M3x35mm Schrauben sichern kann. Darauf achten das der Trigger für das Magazin sehr leichtgängig ist. Gegebenenfalls die Schraube nochmal leicht lösen. Bei manchen Magazinen kann es vorkommen das diese nicht richtig klemmen. Da muß man den Trigger oder das Magazin nochmal leicht mit einer Feile anpassen. Dies kann man hier schon testen, wenn man möchte. ( Ich habe im CAD die Zugfeder nicht, deshalb ist diese hier nicht abgebildet.) <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/107496/2023-10-21_d4o29qpmoq02.jpeg"></figure>—————————————————————————————Schritt 12: Trigger Abzug einsetzenAuch hier wird eine Feder in der Mitte vom Griff eingefädelt und nach oben herausgeführt. Das Gegenstück der Feder kommt aber nicht in den Trigger selber sondern in das Lange Teil was den Kolben im gespannten Zustand hält. Der Schutz für den Trigger wird von vorne eingeschoben und mit 2x M3x8mm angeschraubt. Bevorzugt mit Senkkopf. Danach kann der Trigger selber eingeschoben werden. Am besten von unten und so das er unter dem Teil mit der Feder landet. Diesen dann auch mit einer M3x35 Schraub sichern. Auch hier wieder darauf achten das sowohl Trigger als auch der Hebel für den Kolben ganz leichtgängig sind. <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/107496/2023-10-21_mvkerbgksul5.jpeg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/107496/2023-10-21_g458rylagwvi.jpeg"></figure>—————————————————————————————Schritt 13: Griffstück anbringenEinfach das Griffstück auf die Gewindestangen auffädeln und komplett zusammenschieben. <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/107496/2023-10-21_1n920vanmlzs.jpeg"></figure>Schritt 14: Montage mit der MitteDen hinteren Teil einfach auf das Magazinhalter aufschieben. Den vorderen Teil Mittig von oben aufsetzen und dann bis Anschlag nach hinten schieben. Das Ganze von oben her mit 2x M3x50 und von der Seiter her mit M3x16 (ehr 20mm) anschrauben. <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/107496/2023-10-21_3yuuuttcr1l4.jpeg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/107496/2023-10-21_znnb28arnvco.jpeg"></figure>Danach oben in der Mitte noch die eine M6 Mutter einsetzen und die Gewindestangen ca. Bündig einschrauben. <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/107496/2023-10-21_n89plyb1xrxj.jpeg"></figure>&nbsp;&nbsp;

Caliburn 2023 GER Edition

MFDesigns3D

Here is a Carolina Hurricanes LED Lightbox that I made.Be sure to check out my other models!!

Carolina Hurricanes LED Lightbox

Caniac

RyGuy Design

<h3>This is a reupload of my own design from Cults3d, please do not report for copyright infringement.</h3>&nbsp;Introducing the print and pack hanger - your new favorite travel companion. Never again worry about keeping your clothes neat and organized in your luggage when you can just fold it around the hanger. The print and pack hanger prints quickly and easily with snap-together arms, and a print-in-place hinge for the top, to revolutionize the way you travel.

Print and Pack Travel Hanger

travel

3DJPDESIGNS

Created this cute BIRD ON A SWINGPrint is support free&nbsp;Included Files are -BIRD -SWING (STRING IS NOT PRINTABLE)&nbsp;FOR PERSONAL USE ONLY IF INTERSTED IN SELLING THEMCONSIDERING SUBSCRIBING TO MY PATREONLINK : <a target="_blank" href="https://www.patreon.com/user?u=339505" rel="nofollow noopener">https://www.patreon.com/user?u=339505</a> Being a Patreon will get these files for free every month ^-^Consider following me on Instagram for more updates !https://www.instagram.com/3djpdesigns/Created to bring some fantasy into your work place !&nbsp;Note: This design has been created as ORIGINAL ART

Cute Swinging Bird ( No Support ) 

for sabrina

RestoreDoctor

Radius Gauge R1-30mmSimple tool for determining the radius. A must for being able to draw parts!&nbsp;Settings:<ul><li>0.20mm Standard </li><li>Infill 20 %</li><li>no support</li><li>PLA/ PETG</li><li>Use Multimaterial painting - Smart fill in Prusa Slicer. (Bambu Lab see below)</li></ul><figure class="image"><img src="https://media.printables.com/media/prints/578621/rich_content/fa528cba-7f9d-4977-a2a8-8de6a90157df/thumbs/cover/800x466/png/screenshot-2023-09-10-171052.webp"></figure>

Radius Gauge R1-30mm

tools

tomsky000

Inspired by <a target="_blank" href="https://www.thingiverse.com/lyl3/designs" rel="nofollow noopener">lyle</a>, I made this work. A simple expression of love for dad and mom.I hope you will like it.&nbsp;

I love MOM & DAD 

gift

FlorinV

Funny Toilet poster / sign.You don't necessarly need AMS to print this in two colors. Just change color one time at layer 6 (if you use 0.2mm layers, as in my profile).&nbsp;Powered by Make My Sign from MakerWorld(makerworld.com/makerlab/MakeMySign)

Funny Toilet sign

bathroom

Sam HellMyth

Meet Benny, the adorable little bear with a heart as light as a feather and dreams as high as the sky. Benny always found himself captivated by the wonders of flight, his tiny eyes sparkling with excitement whenever he saw birds soaring through the air. But Benny's dream was something more magical – he yearned to take flight himself, drifting among the clouds on a whimsical adventure.&nbsp;My daughters always used to ask me why Benny was so lonely. Not anymore. Meet Binny.If you dont know who is Binny :) you can find her <a target="_blank" href="https://makerworld.com/en/models/252996" rel="nofollow noopener">here</a><h3>Print Settings</h3>1. Tolerance Test for Connectors:<ul><li>Begin by printing the "Tolerance test for connectors.3mf" to adjust your printer’s tolerance for the connectors. Focus on adjusting the connectors, not the cylinders, which are designed with a 0.2mm spacing. Tailor this setting to your printer for a snug fit.</li></ul>2. Connectors:<ul><li>You’ll need 2 large and 4 small connectors for assembly. Print these immediately after your tolerance adjustments to ensure compatibility, or adjust directly in the "Arms and connectors.3mf" file if needed.</li></ul>3. Base:<ul><li>Opt for a 15-30% infill when printing the base. This increases the weight and stability of the assembled figure, helping Benny stay upright during his whimsical adventures.</li></ul>4. Legs:<ul><li>There are no specific requirements for printing the legs; standard settings will suffice.</li></ul>5. Body:<ul><li>Look for a small dot at the placement area for the left arm (and a corresponding dot on the arm). This feature is designed to help you distinguish which arm is left.</li></ul>6. Head:<ul><li>If your printer supports multicolor printing, use the "head multicolor.3mf" file , but better alternative (less waste of filament) is to paint the face details manually to bring Benny's expressive face to life.</li></ul>7. Arms:<ul><li>The left arm is marked with a dot to ensure correct orientation during assembly.</li></ul>8. Balloon:<ul><li>The balloon is the most challenging part to print. Aim for slow speed, 1 or 2 perimeters and 0% infil (to make balloon as light as you can), and at least a 5mm brim, try to print without support for a smoother finish. But if necessary, use user defined organic supports provided in the .3mf file.</li></ul>&nbsp;<h3>Assembly Guide for 3D-Printed Benny:</h3>Step 1: Prepare Connectors<ul><li>Begin by attaching the connectors to Benny's body. Use the larger connectors for the head and legs, and the smaller ones for the arms.</li></ul>Step 2: Attach Head and Legs<ul><li>Once all connectors are in place, proceed to attach Benny's head and legs to the body.</li></ul>Step 3: Assemble Arms<ul><li>Identify the left arm by the marked dot. Attach the left arm to its corresponding spot on the body</li></ul>Step 4: Base Connection<ul><li>Attach the connectors to the base, preparing it to support the figure. Then, place Benny onto the base, securing him in place.</li></ul>Step 5: Attach the Balloon<ul><li>Cut a length of filament, approximately 35mm, to use as the "rope" for attaching the balloon to Benny's shirt. This step brings the entire piece together, completing the whimsical look of Benny ready for flight.</li><li> </li><li>Be Gentle: When attaching parts, especially the balloon, be gentle to prevent any breakage.</li><li>Customize: Feel free to add personal touches, such as painting the figure or adding additional decorations to make your Benny unique.</li></ul>&nbsp;Have fun and enjoy!If you like cute bears check my other model of cute sleeping bearhttps://makerworld.com/en/models/212478&nbsp;

Cute figure of bear flying on balloon

for wifey

DesignCraft

DISCLAIMER: Print profiles NOT created by DesignCraft may contain outdated model versions or suboptimal slicer settings. Use at your own risk! I have no control to moderate or remove these third party print profiles.&nbsp;The Polymaker v2 print profiles are the original print profiles updated with new models. They're redesigned based on user feedback and also use 30-40% less material. Please refer to the Disclaimer above and also please read the Considerations section below.&nbsp;Description:&nbsp;This adapter system wraps the edges of a POLYMAKER 1kg cardboard spool in order to:<ul><li>provide smooth rotation within a Bambu Lab AMS</li><li>prevent carboard debris from depositing within a Bambu Lab AMS</li></ul>Notes:<ul><li>I've tested with several POLYMAKER PolyTerra spools and the diameters tend to vary slightly.</li><li>The Polymaker.A model fits most of my POLYMAKER spool rims. Polymaker.B has a slightly smaller inner diameter. I use both of these models on my spools.</li><li>It is possible to have Polymaker.A fit on one side of a spool and Polymaker.B fit on the other side.</li><li>The size of the holes on the spool is NOT an indicator of spool diameter from my experience.</li><li>Tested on PolyTerra spools but also may be compatible with PolyLite, PolyMax, and PolyWood.</li><li>Shown as printed with Bambu Lab PLA Basic at 0.2mm</li></ul>Features:<ul><li>Reusable</li><li>POLYMAKER nameplate for easy identification when reusing</li></ul>Instructions:<ul><li>Print Polymaker.A and test BOTH SIDES of the POLYMAKER spool to see if it fits snug. If the ring is too loose for either side then print Polymaker.B and test again.</li><li>See attached photos</li></ul>Considerations:<ul><li>Print Material: Please print with a basic PLA or PETG to minimize any shrinkage.</li><li>Too Tight? Too Loose? Cardboard expands with humidity and contracts when dried. A cardboard spool that has absorbed too much moisture may cause the adapters to fit very tight. Placing the spool in a filament dryer, such as the SUNLU S2, for a bit should resolve this. Note, you should not dry the spool with the adapters attached as they can warp in the heat. Keep in mind that after a long drying session the adapters may fit too loose. This should resolve itself shortly as the cardboard reabsorbs some moisture from the air.</li><li>AMS Lid Doesn't Close? All of the spool adapters I make are less than the official AMS spool clearance limit of 202mm, as specified on the official AMS product page, and as tested within my own AMS. However, some people have stated their spools are rubbing against the lid with the adapters attached. It's hard to say what's causing this since I cannot reproduce the issue myself, however, I've created an <a target="_blank" href="https://makerworld.com/en/models/33133" rel="nofollow noopener">AMS Lid Riser</a> which allows you to keep your AMS lid closed while providing additional clearance for larger filament spools. It's a quick and easy print which you can find on <a target="_blank" href="https://makerworld.com/en/u/243407759" rel="nofollow noopener">my profile</a> or directly here: <a target="_blank" href="https://makerworld.com/en/models/33133" rel="nofollow noopener">https://makerworld.com/en/models/33133</a></li></ul>

POLYMAKER PolyTerra Bambu Lab AMS Cardboard Spool Adapter Ring

for me

uhltimate

Introducing the DIY Fly Swatter Gun, the ultimate weapon in your battle against mosquitoes. This 3D print model lets you build your own mosquito-swatting machine. Just snap the pieces together, no tools required! With a reach of 30cm, you'll have the upper hand in the mosquito-hunting game.&nbsp;IMPORTANT: "min. 4 Wall loops" if the spring has infill pattern, it will not work&nbsp;<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=Mk_qMPQVysw"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/Mk_qMPQVysw" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Fly Swatter Gun Card

home

Slowpoke's Workshop

Mom & rose

friewald.joos

The normal coverse are too 'short for other rims. Enclosed in each case a cover with hexagon 34mm long and one for the rim lock.Printer Bambu X1x Material: PETG or ASA Resolution: 0,16mm Infill honeycomb 40%

Cupra Formentor wheel bolt cover

ProjectFilament

Offer mini chocolate eggs to your guests with this minimalistic Easter bunny!<ul><li>18cm tall, holds about 15 mini chocolate eggs</li><li>supports might be a bit hard to remove but this is to ensure best surface quality!</li><li>for personal use only!</li></ul>My designs are protected by Copyright Law. When you download, you do not have the right to sell any digital file or printed model of my designs. To legally sell printed models, you may obtain my permission by signing up to my Patreon through this link:<a target="_blank" href="https://www.patreon.com/ProjectFilament" rel="nofollow noopener">patreon.com/ProjectFilament</a>&nbsp;Stay connected with me on TikTok and Instagram at @projectfilament Print away!

Minimalistic Easter Bunny Bowl, for chocolate eggs

holiday

3D Art

Ich habe endlich mein eigenen AMS Aufsatz konstruiert so wie ich es benötige und optisch Cool und praktisch finde.(inspiriert von Ben Levi)&nbsp;-Größeres Fach für Druckplatten.-Sortierte Zubehör Schublade. für nozzle,etc.-integriertes LED zum Anschrauben mit M3 Schrauben/Muffen.&nbsp;LED: <a target="_blank" href="https://www.amazon.de/dp/B0B1J69YMH?psc=1&ref=ppx_yo2ov_dt_b_product_details" rel="nofollow noopener">https://www.amazon.de/dp/B0B1J69YMH?psc=1&ref=ppx_yo2ov_dt_b_product_details</a>Gewindeeinsätze M3: <a target="_blank" href="https://www.amazon.de/ruthex-Gewindeeinsatz-Sortimentskasten-St%C3%BCck-Kunststoffteile/dp/B08K1BVGN9/ref=asc_df_B08K1BVGN9/?tag=googshopde-21&linkCode=df0&hvadid=389361341920&hvpos=&hvnetw=g&hvrand=6385810813141284926&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9114679&hvtargid=pla-977557319694&psc=1&mcid=d1c8f62ec46d31139b06805550f3488f&th=1&psc=1&tag=&ref=&adgrpid=79663322117&hvpone=&hvptwo=&hvadid=389361341920&hvpos=&hvnetw=g&hvrand=6385810813141284926&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9114679&hvtargid=pla-977557319694" rel="nofollow noopener">https://www.amazon.de/ruthex-Gewindeeinsatz-Sortimentskasten-St%C3%BCck-Kunststoffteile/dp/B08K1BVGN9/ref=asc_df_B08K1BVGN9/?tag=googshopde-21&linkCode=df0&hvadid=389361341920&hvpos=&hvnetw=g&hvrand=6385810813141284926&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9114679&hvtargid=pla-977557319694&psc=1&mcid=d1c8f62ec46d31139b06805550f3488f&th=1&psc=1&tag=&ref=&adgrpid=79663322117&hvpone=&hvptwo=&hvadid=389361341920&hvpos=&hvnetw=g&hvrand=6385810813141284926&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9114679&hvtargid=pla-977557319694</a>M3 Schrauben: https://www.amazon.de/St%C3%BCck-Linsenkopf-Schrauben-M3x6-Linsenkopfschrauben/dp/B07K7NRDPX/ref=sr_1_2?&nbsp;I have finally designed my own AMS attachment the way I need it and find it visually cool and practical.(inspired by Ben Levi)-Larger compartment for printing plates.-Assorted accessories drawer. for nozzle, etc.-integrated LED for screwing on with M3 screws/sleeves.&nbsp;LED: https://www.amazon.de/dp/B0B1J69YMH?psc=1&ref=ppx_yo2ov_dt_b_product_details&nbsp;I would like to share my work with you and hope you have fun and enjoy it.&nbsp;

AMS Riser Superstructure by 3D Art/ X1/P1

upgrades

UsefulPrints

Hogwarts Castle

MATRIXx

Remote holder /Fire tv stick /Apple TV

kitchen 

planes01

<h3>Model</h3><h3>Overview</h3>SR-71 kit card that was created to showcase a true aviation engineering marvel and is an inspiration for kids and adults of all ages in pursuit of science, technology, engineering, and math (STEM). This particular model uses color and sliced 3D format to really bring a highly contoured airplane to life upon assembly. The kit format is great for gifting the model to engineering clubs, friends, family, or coworkers that enjoy building and showcasing aviation engineering history. The kit includes a stand that is assembled to display the model.&nbsp;Check out the <a target="_blank" href="https://makerworld.com/en/models/199176" rel="nofollow noopener">SR-71</a>, <a target="_blank" href="https://makerworld.com/en/models/242106" rel="nofollow noopener">B-52</a>, <a target="_blank" href="https://makerworld.com/en/models/436445" rel="nofollow noopener">A-10</a>, <a target="_blank" href="https://makerworld.com/en/models/402126" rel="nofollow noopener">787</a>, and <a target="_blank" href="https://makerworld.com/en/models/405459" rel="nofollow noopener">Darkstar</a>!Check out the full airplane kit card collection → <a target="_blank" href="https://makerworld.com/@planes01/collections/991821" rel="nofollow noopener">linked here</a>!<h3>Profiles</h3><ul><li>Small Kit with Frame<ul><li>small plane kit with frame ideal for gifting to others</li></ul></li><li>Large Kit with Frame<ul><li>large plane kit with frame ideal for gifting to others</li></ul></li><li>Small Model Pieces<ul><li>small plane without frame ideal for assembly right off the printer</li></ul></li><li>Large Model Pieces<ul><li>large plane without frame ideal for assembly right off the printer</li></ul></li></ul><h3>Filament</h3>As shown:<ul><li>Bambu Lab PLA Black</li><li>Overture PLA Cement Gray</li><li>Overture PLA Space Gray</li><li>Esun PLA+ Fire Engine Red</li></ul><h3>Tips</h3><ul><li>Model requires close tolerances to ensure snug but not tight or loose fit<ul><li>Make sure the model cools to room temperature before assembly</li><li>Ensure filament is properly calibrated with no excessive over extrusion</li></ul></li><li>Ensure good bed adhesion<ul><li>Make sure printer is fully calibrated</li><li>Make sure print bed is clean &amp; dry (soapy water is my favorite for cleaning - simple &amp; works)</li><li>Make sure filament is dry (wet filament can generate non-continuous flow that can cause bed adhesion issues)</li><li>Cooling &amp; Temps - make sure they are correct for your printer, build plate, and filament</li></ul></li></ul><h3>Assembly</h3><ul><li>Remove all pieces from the kit</li><li>Debur as needed to smooth edges</li><li>Insert connector between engine halves<ul><li><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000199176/design/2024-02-24_81f8b94fa9812.jpg"></li></ul></li><li>Press engine halves together<ul><li><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000199176/design/2024-02-24_499c3e2a6c543.jpg"></li></ul></li><li>Insert engine into fuselage (snaps together). Note LHS &amp; RHS engine positions below!<ul><li><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000199176/design/2024-02-24_5e37007ed5a03.gif"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000199176/design/2024-02-24_2572f2daa805a.jpg"></li></ul></li><li>Insert outboard wing into engine (snaps together)<ul><li><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000199176/design/2024-02-24_582fe33443f7.jpg"></li></ul></li><li>Insert vertical tail into engine (snaps together; recommend to insert aft end of vertical tail first and then press down on forward end)<ul><li><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000199176/design/2024-02-24_02853c5841433.jpg"></li></ul></li><li>Place airplane onto stand<ul><li><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000199176/design/2024-02-25_3244aa356b7fb.jpg"></li></ul></li><li>Enjoy!</li></ul>&nbsp;<h3> FAQ</h3><ul><li>How do you make the airplane kit card models?<ul><li>Fusion 360! All of my models are created by me in a CAD environment. I love to design &amp; print my creations!</li><li>Here is a view of this SR-71 model showing sketches &amp; bodies!</li><li><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000199176/design/2024-03-05_8bcb3d1b0e6e1.png"></li></ul></li><li>How can I learn how to make kit card?<ul><li>Learn the tools &amp; keep exploring! (YouTube is a great starting place)</li><li>The basic steps:<ul><li>Create sketch for each of the major components: wing, fuselage, vertical tail, joints, etc..</li><li>Create solid bodies using those sketches (extrusions, lofts, etc…)</li><li>Add any details like blends, fillets, chamfers</li><li>Create the stand over the center-of-gravity (note the maker point on the image above!)</li><li>Fine tune tolerances in the joint (here is where a lot of 3D printing prototyping comes into play!)<ul><li>Fun Fact: This SR-71 had 6 prototypes before publishing to the community</li></ul></li><li>Add kit frame</li></ul></li></ul></li></ul>

SR71 Kit Card

office

sickicarus

This is NOT my model - it is my profile to print the following model:&nbsp;<a target="_blank" href="https://www.thingiverse.com/thing:2425586/files" rel="nofollow noopener">https://www.thingiverse.com/thing:2425586/files</a>&nbsp;The first plate is print-in-place (with supports) - I have no idea if it will work the way I've configured it, its there for the thumbnail in Bambu Studio, but I put some effort into it so it should print - I just haven't tried it. I printed the 2nd & third plates, with the model seperated from the base. The final plate is the original model files, both assembled and disassembled, for reference and is not meant to be printed.&nbsp;Scaled up 200%. Supported as needed.Four filaments - Red, Black, White, and Support. There is a 5th filament, its just a modification of the Black filament profile for the base, disabling the Aux fan for a couple dozen layers to prevent warping, because I hate brims.You could print this without a Support filament I'm sure - just adjust the slicer values appropriately. &nbsp;The pictures do NOT do this justice! The model is gorgeous, and highly detailed. To see the fabric texture of the suit requires the model to be scaled up (hence, 200%).The primary filament I used is Paramount-3D Black Cherry PLA - and it just slaps. It has a depth of color that cannot be seen in the photos.The black and white filaments were both PolySonic.

gun

Caniac

travel

for sabrina

tools

gift

bathroom

for wifey

for me

home

for wifey

car

holiday

upgrades

fun

kitchen

office

for marty