Search models, users, collections, and posts
Bio
Jack of all trades, master of none
mariner, boy scout, husband, father,
I needed a clip to hold a section 2x4 to serve as a roosting bar for chickens. I used a file for a broom holder and modified it. It holds a section of 2x4 with a slight amount of spring tension yet allows the bar to be removed for occasional cleaning
large clip to hold a 2x4
4
25
Share
0
0
0
I scaled it to max out my A1 mini bed and it printed great in PETG - thanks!
Share
0
0
0
printed great in PETG - using it to sift chicken coop mess out of sand in the coop
Share
0
0
0
printed nicely in PLA, but I’ll need to scale it up to fit my needle nose
Share
0
0
0
printed nicely in PETG, but after a few days it’s cracking - I’ll try TPU
Share
0
0
0
printed nicely in orange PETG
it doesn’t perfectly fit the end of the aftermarket cord I have, but it should help. I used PETG because the first one I printed in PLA cracked when I forced the end into the opening. PETG is a little more flexible. thanks for posting
Share
0
0
0
printed great in bronze PLA
I scaled it up 128% to practically max out the plate of my A1mini…to hold safety glasses
initially attached with double sized tape, but that didn’t work because if the textured siding it was applied to. I’m not adept at modifying files to add holes, so I just drilled two in to mount with screws
Share
0
0
0
printed fine in PETG. the threads didn’t leak. the flow rate on the showerhead is a little off, the holes should probably be smaller and/or less of them. thanks for sharing
Share
0
0
0
printed great in PLA - which doesn’t have the UV protection that PETG has, so I’ll likely need to replace this at some point.
a perfect friction fit over 4x4 post sleeve, would need to be scaled down if your application is to only cover a post without a sleeve.
slight color mismatch with the sleeve but I’m happy with it
Share
0
0
0
Share
0
0
0
printed great in PLA and works great
Share
0
0
0
Share
0
0
0
a quick print for a house guest who asked about my 3DP - and happens to be a golfer. printed great in orange PETG
Share
0
0
0
printed fast and clean in white PLA and worked great - I was doubtful about the PLA being to stiff to bend, but the hinge part is so thin it worked great
Share
0
0
0
Share
0
0
0
printed great in orange PETG - scaled these up to hold roosting perches in my chicken coop
Share
0
0
0
Share
0
0
0
I’ve printed a few sprouting aids and this is my favorite. it printed perfectly in matt black PLA. thanks for sharing the file!
Share
0
0
0
printed great in orange PETG. I might modify the leg to be a little wider/trapezoid shaped for stability. thanks for posting it
Share
0
0
0
these printed perfectly in silver silk PLA. they have a solid, sturdy feel to them. I’m glad to say that the drill size labels are deep and clear and easy to read
Share
0
0
0