user_1623914629

squinn

A handy tool to help with soldering, de-soldering, or other tasks where you need a steady third hand.  This is a fully printable design, so no other hardware is required.  The clamping mechanism can be adjusted to accommodate boards up to 20 cm in length, and can be installed facing either direction.&nbsp;All STLs are oriented as they should be for optimum printing, which have been designed with the layer lines in mind to result in a strong print (and no supports or brim should be required).

Adjustable PCB Holder Tool

tools

IndomReps

Tool and Battery mounts for Makita 18v tools and batteries&nbsp;These are nearly universal and will fit a good portion of Makita's tools and is universal for all 18v batteries and like my other tool mount designs are decently strong and shouldn't have any issues holding any of the tools that fit on it.&nbsp;Attach them to whatever surface you want with 2 #8 screws. Tool mounts are best used in a undermount orientation but can certainly be mounted on a horizontal surface if it suites your application. The battery mounts can be mounted in whatever orientation you want as they use the batteries locking mechanism to hold the batteries in place.&nbsp;Ive printed these Pro PLA without issue and regular PLA would probably work fine as well. If you intend to put these in a work truck or trailer i'd probably use something like PETG or ABS otherwise those materials are overkill for a garage or indoor shop.&nbsp;Default profile uses .2 layer heights but you can bump up layer height for a faster print as layer height doesnt matter for these. Ive printed these on Ludicrous speed and did not have fitment issues. There are also a few plates to select from with the difference being manual snug supports added for the battery lock and gives you the option to print with or without supports.

Makita 18v - Tool & Battery Mount

adapters

Brit

Hey adventurer, so the process for this piece goes as such… There are slots in the post for the signs to slide into and they may fit a little tight, but nothing to fight with. The post slots on the bottom for Winterhold and Rorikstead actually have a slight angle to them so just keep that in mind when you push the signs in those slots. As for the rest of the signs on the front flat surface of the post I just used a dab of super glue to attach them on. Also, Whiterun has a small thinner piece for the backside of it and it just needs glued on. I thought making that one double sided was needed to look better as you will see that sign from both sides. &nbsp;*Make sure for the sign post part that you have auto tree supports on. Should be saved in the print profile for it but I am still learning the ropes on here with uploading files.

Skyrim Road Sign 

decorative 

3DMN

Introducing the ultimate addition to your Fallout collection: the Vault Boy Figure! Crafted with meticulous attention to detail, this iconic figurine captures the essence of the beloved Fallout series.

tools

adapters

decorative

toys