空中飞飞人

standitupstore

Image used was from the Famous Hue Forge Master<a target="_blank" href="https://makerworld.com/en/models/14199#profileId-14176" rel="nofollow noopener">https://makerworld.com/en/models/14199#profileId-14176</a>&nbsp;&nbsp;This Fits Standard PC laptops Slim Macbook version coming soon if resizing to fit your Laptop the Upright tower is a separate object that can be moved to avoid scaling down &nbsp;

Cherry Blossom RX-7 Laptop Stand 

Holder & Stand

FlorinV

<ul><li>Stress Relief Hovering Exclamation Point is a fun and interactive way for children (not only) to relieve stress and anxiety.</li><li>This unique hovering feature and shape resembling an exclamation point, it provides a visually appealing and engaging experience for kids.</li><li>For a more challenging play, try to spin it reversed, it works! 😊</li><li>Easy to print. There are 2 profiles, depending on what you want:<ul><li>First profile contains 2 parts that should be glued together. Printing it like this, the toy would look better, but you need to glue it. When gluing please be sure to align the bottom part arm (which holds the sphere) to the grooves on the top part, like in the picture bellow. You need to glue them precisely, and form an 180 degrees between arms.</li></ul></li></ul><figure class="image image_resized" style="width:52.84%;"><img src="https://makerworld.bblmw.com/makerworld/draft/641064/2024-02-14_b73e6c278a228.png"></figure><figure class="image image_resized" style="width:43.79%;"><img src="https://makerworld.bblmw.com/makerworld/draft/641064/2024-02-14_3cc78ed84c2c7.png"></figure><ul><li>Second profile prints the spinner in one part (no glue / assembly is needed), but has more supports and the result doesn't look as good as the first profile.  </li></ul>Please remove carefully the model from the print plate, eventually after the plate has cooled.  Please remove carefully the supports from the thin parts, not to brake them. Hold the parts tight and try to remove the support easily and slowly. Don't force them in one go, as it may brake the model.&nbsp;For another fun spinner, you can try this one: <a target="_blank" href="https://makerworld.com/en/models/211100#profileId-230906" rel="nofollow noopener">https://makerworld.com/en/models/211100#profileId-230906</a><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/641064/2024-02-28_191edf835a268.gif"></figure>

Spinner Hovering Exclamation Point

Toys

mkersjes

I saw this nice design for a cover to protect your z-axis bearings from dust and liked the idea ,but i did not want the surface to collect dust in the spaces between, so i remixed the model so it will be flat on top for easy clean, plus i added a ring under the cover to make sure it could not slide out of position.&nbsp;You can turn your model 180 degrees on the plate and make the pattern another colour by selecting the painting tool with bucket choose your colour and select the pattern, by choosing the colour in your main part you change the body colour.

Z Axis Dust Cover Protection HEXAGON / POLYGON / SLOTTED / BAMBU LOGO/PLAIN closed pattern Version 3

Printer

Tommy Gun

Nice solid clip i made for the wife, to help store stuff in the pantry ! &nbsp;Ratcher / lockable clamp !! Clamp-It : <a target="_blank" href="https://makerworld.com/en/models/223376#profileId-241391" rel="nofollow noopener">https://makerworld.com/en/models/223376#profileId-241391</a> Crocodile clip : <a target="_blank" href="https://makerworld.com/en/models/242413#profileId-258475" rel="nofollow noopener">https://makerworld.com/en/models/242413#profileId-258475</a>

Clip-it Bag Clip/Clamp

Clip

Krookr

Print-in-place model to hold CR2032 Batteries.<h4>Print instructions:</h4>0.2 or less layer height. No supports needed.The hinge for this box is print-in-place. I used a 0.2mm clearance which should be fine for most well-calibrated printers. The first time you move the hinge may require a bit of pressure. Repeatedly opening and closing the box will make the hinge movement smoother. Same goes for the clasp, which may be a bit hard to open the first couple of times. Open and close it a few times, and it should be fine.&nbsp;Disclaimer:This is not my own design, but by fuchsr: https://www.printables.com/model/63026-print-in-place-customizable-cases-for-button-type-

Print-in-Place CR2032 Battery Case

Case

Chamomile_3D

<h2>Test your printer tollerance and accuracy!</h2> The numbers in each circe represents the distance in mm between the outer and the inner wall for each side. Requires only 3 grams and lets you know if you have to calibrate your printer flow!&nbsp;NOTE!The 0.05mm gap can be able to spin only with 0.2mm nozzles.  Using a 0.4mm nozzle, the slicer will not consider this tiny gap and will fuse the parts together.&nbsp;&nbsp;

Tollerance Coin test

Test

Fyrby Additive

V-Spooler

Tools

TwistyPrints

The model does not require supports, the head is separate from the body, you can insert the head joint on the neck hole after print. If you need assistance just ask! Keep in mind that the purchase of this model does not include a commercial license. If you want to sell prints of our models ,get all our creations in early access and exclusive models take a look at our Patreon Page!⭐ ⭐⭐<a target="_blank" href="https://www.patreon.com/user?u=81262195" rel="nofollow noopener">https://www.patreon.com/user?u=81262195</a> ⭐⭐⭐ Follow us on instagram to stay updated about new models !-<a target="_blank" href="https://www.instagram.com/twisty_prints/" rel="nofollow noopener">https://www.instagram.com/twisty_prints/</a>