Tractor tire pattern bottle boot printed in TPU. This fits most Stanley Quencher tumbler models and other similar sized tumblers like Yeti, RTIC, Owala, and Hydroflask (diameter at the base of approximately 3 inches or 76mm). I used standard 95A TPU filament with a custom scarf location to prevent stringing. The model can be scaled to adjust for sizing/fit.

This is a modification to a window vent spacer kit from Amazon. It has models for outer diameter dimensions ranging from 36mm-125mm (inner diameter of 30mm-119mm). It can be printed with any material, but if it will be exposed to the sun then PETG or ASA would be a better material to prevent warping.

This is my TPU car track adapter design that connects H*t Whe3ls Speed Snap tracks to the classic orange E-Track. It also allows connecting Speed Snap tracks to each other in any direction, breaking free from the one-way connections of this track design. See the PLA version of my design: https://makerworld.com/en/models/2596480-speed-snap-to-e-track-adapters-pla

This is my PLA car track adapter design that connects H*t Whe3ls Speed Snap tracks to the classic orange E-Track. It also allows connecting Speed Snap tracks to each other in any direction, breaking free from the one-way connections of this track design. See my TPU version of this design: https://makerworld.com/en/models/2596465-speed-snap-to-e-track-adapters-tpu-flexible(Edited)

I just added a print profile for a stronger version of my Snoopy bookends. Check it out! #snoopy #bookend(Edited)

Just uploaded a 25mm longer version of my H*t Wheels track clamp. It can open to a max width of 55mm: https://makerworld.com/en/models/1624328-car-race-track-clamp-v2#profileId-2398289 #Hotwheels(Edited)

Check out this very strong QuadLock magnetic plug with magnetic ring/stand that doubles as a removal tool.

This consists of a cable chain kit, and a 500mm honeycomb mount kit that will hold a back plate and the honeycomb, with a space in between if needed. My cable chain kit design is unique because it is low profile and does not extend the footprint of the frame. This is why it works with the portable xTool enclosure and others that are a similar size. My 500mm honeycomb kit works with the xTool honeycomb or any other 500mm honeycomb.

I just uploaded a parametric (customizable) art box that can hold markers, crayons, pencils, or anything else.

Here is my version of base 10 blocks for learning and teaching math. These can be used with 2x8mm magnets, and are designed to be stuck to metal surfaces.

Launched my modular Hexagon Mini Figure glowing display that can be expanded to any size. It only requires one LED light strip and black and white PLA. Can be printed with or without AMS.#Minifigures #Glow Within

Uploaded my new version of the h*t wheels track clamp!(Edited)