郑州周大侠

Rockettree

I wanted to mount the switch of the Bambu lab 001 led project so it was not dangling down the side of the bed. I made this in two parts, the back mount which uses the two screws supplied with the kit and then a font cover which slides over.&nbsp;The mount works just fine without the front cover but I wanted to tidy it up and thought it would be pretty easy to model other covers to slide over with your own designs. You can flex the PLA of the front cover enough to turn the lamp on/off, but it might be better to print in PETG or TPU.&nbsp;Lamp components found here <a target="_blank" href="https://store.bambulab.com/products/led-lamp-kit-001" rel="nofollow noopener">https://store.bambulab.com/products/led-lamp-kit-001</a>&nbsp;EDIT: Added a smaller cover with a hole for the button so you do not have to flex the entire housing to press.

LED Lamp 001 switch holder

missing_string

Version 2 is up, and even more true-to-life! Go check it out at <a target="_blank" href="https://makerworld.com/en/models/483987" rel="nofollow noopener">https://makerworld.com/en/models/483987</a>&nbsp;This is an ultra-realistic 1-1 scale model of the M67 fragmentation grenade with M213 fuse used by the U.S. and Canadian military, among militaries of many other nations. It is an enhanced version of the M33 grenade which preceded it, and was introduced in 1960. It was distinguished from the M33 by an improved fragmentation matrix that was so highly classified, the grenade was not issued to Soldiers fighting in Vietnam until 1968 for fear they would reveal the fragmentation technology to the enemy. There&#39;s your trivia for today.&nbsp;I modeled this off a dummy grenade from a military surplus store which was not as realistic as I liked, and made corrections using multiple reference photos. Given the fact that I don&#39;t have access to live frag grenades to use for 3D modelling, I can&#39;t guarantee the parts of this model are interchangeable with the real grenade (although I don&#39;t recommend you mix 3D printed parts with live grenades anyway). All parts are interchangeable with my model of dummy grenade. Additionally, this is a model of the pre-2015 version of the M67 that is not equipped with the 90-degree confidence clip that serves as a third safety device on the modern grenade. These pre-2015 grenades are still issued, and will continue to be “current gear” until the stockpiles are depleted.&nbsp;The grenade body is hollow and can be used as a storage box for small items or filled with sand to weight the grenade to the correct 14oz. the two halves of the body screw together at the center seam and there is an additional hole where the fuse screws into the upper body. I had to do a bit of finishing work to the body halves to get a tight fit, but this only took about 5 minutes with a hobby knife and sandpaper. The safety clip (silver in the images) is not included in the file, I made it using about 2/3rds of a large paper clip using reference photos.&nbsp;As usual with my munition models, this is a highly accurate model that could be mistaken for a real munition if brandished in public. Be smart and be kind. If you&#39;re going to use this for cosplay in public, you can reduce (but not eliminate) potential problems by printing the grenade body in blue, the universal color for an inert munition. For display, the entire grenade is OD green with black markings, except for the collar (the 2mm lip at the top of the upper body), which is a burnished brass color.&nbsp;The grenade can be verified as inert without removing the pin by looking through the holes at the top of the fuse and verifying that a striker assembly and spring is not present.&nbsp;If you like this model, I&#39;d appreciate a like! I&#39;m working on other munitions models, but the price of inert grenades is definitely a limiting factor, so if you&#39;re looking for somewhere to use your boost tokens, the savings on material costs (15-20 prototypes per upload) would go a long way towards the purchase of reference models. Now that the shameless begging is over, please enjoy and stay tuned for more!

Realistic M67 Fragmentation Grenade Model

Luca Dilo

<h2>Spring Gun - Shoots fake bullets and poop </h2><h2>V2 IS ONLINE... ENJOY THE POWER OF MAG!!!</h2>Single-piece printed spring gun that shoots fake bullets and poop, fast, easy to print and a lot of fun to use. <figure class="image image_resized" style="width:33.05%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000419350/design/2024-04-08_6d8356cea09fa.gif"></figure> I had to make several attempts to find the right ratio of spring length to spring strength. Also once I found the correct ratio the spring tended to deform too much so I had to add supports above and below the spring that hold it in place. <figure class="image image_resized" style="width:30.98%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000419350/design/2024-04-08_ef82bc3dcf9e2.jpg"></figure> I also design a simple target to test the gun.<figure class="image image_resized" style="width:29.65%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000419350/design/2024-04-08_82c88ca702119.jpg"></figure><h3>Update 10/04/2024</h3>Add Bullets Holder print profile: keep up to 4 bullets with you!! Enjoy it!!<figure class="image image_resized" style="width:27.65%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000419350/design/2024-04-10_d472332ca292.jpg"></figure><h2>*** Update 18/04/2024 ***</h2>Add Bullets V2: Lighter and hollow bullet, increases the range of the spring gun.I read all your comments full of advice, I am working on a version 2 of the spring gun that will improve what you suggested. thanks for the support and stay tuned.<figure class="image image_resized" style="width:23.77%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000419350/design/2024-04-18_1203f1c86b65c.png"></figure>

灯

ZZH

DD