RayZ

Kocyns

<h3>Basic info:</h3><ul><li>Toroidal propeller launcher with double planetary gearbox.</li><li>Update: Part 13-256.stl - extended stick for bed 256x256mm (A1/P1/X1).</li></ul><figure class="image image_resized" style="width: 40.15%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000077780/design/2023-12-17_c4bb05a73c6fe.gif"></figure><figure class="image image_resized" style="width: 39.63%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000077780/design/2023-11-29_83uzwi9s2ww6.gif"></figure>&nbsp;Gearbox:<ul><li>Non-printable parts: You just need one type of screws (M3x16 Countersunk screw, DIN 7991) for assembly.</li><li>Gear ratio 1:12 with smooth move.</li></ul><figure class="image image_resized" style="width: 28.52%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000077780/design/2023-11-29_zynkq0o8slne.gif"></figure><h3>Printing:</h3><ul><li>No supports!</li><li>Layers height are 0,12-0,2mm.</li><li>Recommended material for gears is PETG, see below to BOM.</li></ul><h3>BOM:</h3><figure class="table"><table><thead><tr><th colspan="4">Printed parts/Purchased parts</th></tr><tr><th style="border: 1px solid #000000">Item</th><th style="border: 1px solid #000000">File</th><th style="border: 1px solid #000000">Qty</th><th style="border: 1px solid #000000">Description</th></tr></thead><tbody><tr><td style="text-align: center">1</td><td>1.stl</td><td>8</td><td>PETG</td></tr><tr><td style="text-align: center">2</td><td>2.stl</td><td>1</td><td>PETG</td></tr><tr><td style="text-align: center">3</td><td>3-Ring-up.stl</td><td>1</td><td>PETG</td></tr><tr><td style="text-align: center">4</td><td>4-Ring-down.stl</td><td>1</td><td>PETG</td></tr><tr><td style="text-align: center">5</td><td>5.stl</td><td>1</td><td>PETG</td></tr><tr><td style="text-align: center">6</td><td>6.stl</td><td>1</td><td>PETG</td></tr><tr><td style="text-align: center">7</td><td>7.stl</td><td>1</td><td>PETG</td></tr><tr><td style="text-align: center">8</td><td>8.stl</td><td>1</td><td>PLA (1)</td></tr><tr><td style="text-align: center">9</td><td>9.stl</td><td>1</td><td>PETG</td></tr><tr><td style="text-align: center">10</td><td>10.stl</td><td>1</td><td>PLA</td></tr><tr><td style="text-align: center">11</td><td>11.stl</td><td>1</td><td>PLA</td></tr><tr><td style="text-align: center">12</td><td>12.stl</td><td>1</td><td>PETG</td></tr><tr><td style="text-align: center">13</td><td>13, 13Low ,13-256</td><td>1</td><td>PETG (2)</td></tr><tr><td style="text-align: center">14</td><td>14.stl</td><td>1</td><td>PETG</td></tr><tr><td style="text-align: center">15</td><td>Tor_170.stl, Tor_200.stl</td><td>1</td><td>Propeller (3)</td></tr><tr><td style="text-align: center">-</td><td>Tor_base.step</td><td>-</td><td>to create remixes</td></tr><tr><td style="text-align: center">16</td><td>Screw M3x16</td><td>11</td><td>Countersunk screw (DIN 7991)</td></tr></tbody></table></figure><ol><li>Recommended high of layers 0,12mm</li><li>13Low.stl is for printer bed size under 250x210mm. 13-256.stl - extended stick for bed 256x256mm (A1/P1/X1).</li><li>170mm or 200mm toroidal propeller +105mm. Recommended high of layers 0,12mm.</li></ol><h3>Assembly:</h3>STEP 1:<figure class="image image_resized" style="width: 40.15%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000077780/design/2023-11-29_wkmqsgwz6zyl.png"></figure><figure class="image image_resized" style="width: 40.03%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000077780/design/2023-11-29_lbjrwlyynvsa.png"><figcaption>Note: Screw (red) in detail A shouldn&#39;t be too tight!</figcaption></figure>STEP 2:<figure class="image image_resized" style="width: 40.02%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000077780/design/2023-11-29_ozf5yzznmp1z.png"></figure>STEP 3:<figure class="image image_resized" style="width: 40.02%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000077780/design/2023-11-29_oog17ne6f0uq.png"></figure>STEP 4:<figure class="image image_resized" style="width: 39.99%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000077780/design/2023-11-29_sstcnap2p6qk.png"></figure>STEP 5: Let&#39;s fly!!<figure class="image image_resized" style="width: 40.14%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000077780/design/2023-11-29_4qb6fj7yq7z3.png"></figure><h3>Commercial uses:</h3>If you want permission for commercial use: <a target="_blank" href="https://www.patreon.com/kocy/" rel="nofollow noopener">patreon.com/Kocy</a>&nbsp;&nbsp;Note: By downloading and using the model, you agree that it is provided &#34;as is,&#34; without any warranties. The authors of this model are not liable for any accidents, damages, or other issues that may arise from its use. Users are encouraged to exercise caution and use the model responsibly. The author disclaims any responsibility for any losses or damages incurred through the use of this product.

ToroSpin Turbo - Launcher with planetary gearbox

traxendre

Hello there, I propose you this useful Broom stick holder that can be mounted on wall / Furniture&nbsp;This improve system avoid clip that can damage the support and do a satisfying Clic&nbsp;This model is for 22mm diameter Broom stick, Also give STL for 25mm,30mm,35mm same profil should work fine&nbsp;No support needed, can be print in PLA (will add my profil BBL Studio for strong part) or others your into.&nbsp;If you don't use the profile be sure to put a least 4 walls loops and 15% infill to be strong enough&nbsp;Usage : 1 - Print it 1bis - verify that the print is strong enough1ter - you can add EPDM tape inside the ring to smoth things up! very easy and removable2 - put it in a wall with adequate fixation in fonction of your wall3 - unclip the mechanism 4 - Clip you tubeEt Voila !&nbsp;you can print more and put it at different places for conviniences&nbsp;Will upload a model For Dyson Tube look at my profil!&nbsp;And yes i will do on for light Sabers ;)&nbsp;OG @fns720Don't hesitate to like and add to you collection then leave a review after your print it ;)&nbsp;

Mechanical Broom Holder No support 22mm

Tidy

Barbatros

Wrist rest inspired by Carpio 2.0 ergonomic wrist rest,https://deltahub.io/en-eu/products/carpio-ergonomic-wrist-rest.

Wrist Rest

Digital

k.krastevbg

Turns out that the Mi Vacuum Cleaner Mini doesn't have a wide flat nozzle (particularly useful for cleaning a table, or trash from under the bed of a Bambu Lab X1C ), so I made one in F360. I printed it in PETG, @ 0.2mm, 5 wall loops, with supports. This is the best way I found it could be printed: <figure class="image image_resized image-style-align-center" style="width:61.2%;"><img src="https://makerworld.bblmw.com/makerworld/draft/50478/2023-09-20_1spf8t3ulx7y.png"></figure>

Mi Vacuum Cleaner Mini wide extension (nozzle) at 60 degrees angle

XiaoMi

OnlyWoodDesign3D

These Sorting Boxes offer a comprehensive organizational solution with a range of sizes to suit various needs. Designed to seamlessly fit into the IKEA Helmer drawer unit, these sorting boxes come in different dimensions to accommodate a wide array of items.&nbsp;The small sorting boxes are ideal for storing tiny office supplies like paper clips, push pins, and thumbtacks. These boxes enable efficient sorting and easy access to small essentials, keeping your workspace tidy and clutter-free.&nbsp;All Sorting Boxes for the IKEA Helmer drawer unit are designed to withstand everyday use and maintain their structural integrity over time.&nbsp;Whether you need to organize small office supplies, craft materials, or miscellaneous items, the IKEA Helmer Sorting Boxes offer a versatile and efficient storage solution tailored to your specific needs.sizes:1*1 46mm*48mm1*2 46mm* 96mm1*3 46mm*144mm1*4 46mm*192mm2*2 92mm*96mm2*3 92mm*144mm2*4 92mm*192mm3*3 138mm*144mm3*4 138mm*192mm4*4 192mm*192mm

Ikea Helmer Sorting Boxes

IKEA

dklarations

I wanted a Heatset Insert Press and I realized that I have a Dremel Drill Press that I haven&#39;t been using - Thought I&#39;d be able to make a little adapter for a soldering iron.  Just about any of the inexpensive Amazon soldering irons will work, but I did link the one I used.  I find these parts together to be less expensive and more functional than other options - plus you can still use the press for your Dremel! Supports needed only for the larger hole. Directions: Remove the two bolts on the underside of the black piece that would hold the dremel and use those bolts to attach this piece.  Insert the soldering iron (depending on what soldering iron you have, you may wish to insert this before attaching it to the press itself) Insert two M3 bolts with nuts and washers to lock in the soldering iron - easy as that! Let me know if you have any questions or requests! PRODUCTS USED: Dremel 220-01 Drill Press ($45): <a target="_blank" href="https://amzn.to/4aZmo4S" rel="nofollow noopener">https://amzn.to/4aZmo4S</a> (aff.) Inexpensive Soldering Iron ($16): <a target="_blank" href="https://amzn.to/4bHSlyP" rel="nofollow noopener">https://amzn.to/4bHSlyP</a> (aff.) Inexpensive Heat Set Insert Tips($9): <a target="_blank" href="https://amzn.to/4b26FCg" rel="nofollow noopener">https://amzn.to/4b26FCg</a> (aff.) Assorted M3 Hardware: <a target="_blank" href="https://amzn.to/3QBLj6n" rel="nofollow noopener">https://amzn.to/3QBLj6n</a> (aff.)

Dremel Heatset Insert Press Adapter

Tool

thrutheframe

<h3>NOTE:</h3><ul><li>Please read the instruction guide below.</li><li>Download the 3mf file if you are using a Bambu slicer. Download the stl if you are using other slicers.</li><li>I do my best to double-check and test the print profiles I created. They are up to date with whatever changes I make. If you are using profiles made by others, please check if they are updated.</li></ul>&nbsp;<h3>UPDATE 24 Nov 2023</h3>Previous writeup - “…One of the ideas was to attach a bin/basket on the end of the cantilever x-axis. But based on experience with cantilever printers, it is never a good idea to hang a bin/basket at the extreme end of the X-axis extrusion, regardless of how robust the Z-axis linear rail is… ”&nbsp;I was not entirely right. While hanging a bin/basket at the end of a cantilever was never a good idea, attaching a lightweight guide/baffle is a very good idea. I looked at the designs by others and CAD what I think is a combination of what was good. Together with a shorter bin, I added Option 3 - Short Bin with <a target="_blank" href="https://makerworld.com/en/models/72654#profileId-77178" rel="nofollow noopener">Pruge Guide</a>. I have updated this project's 3mf file.&nbsp;The short bin uses the same magnetic docking system. So you will still need to print the magnetic docks D1 (plate 1).&nbsp;In addition, I have also increased the capacity of the bin without an increase in footprint.<figure class="table"><table><tbody><tr><td><figure class="image image_resized" style="width:100%;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-11-24_0bf6f9d142792.png"></figure></td><td><figure class="image image_resized" style="width:100%;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-11-24_ab21b4e9da909.png"></figure></td></tr></tbody></table></figure>&nbsp;This is the first of three designs by Thrutheframe for A1 mini. The 3 essential printable accessories that you will need for your new printer.<ol><li>A1 mini Poop Management System (PMS)</li><li><a target="_blank" href="https://makerworld.com/en/models/28311#profileId-24696" rel="nofollow noopener">A1 mini Build Plate Stand</a></li><li><a target="_blank" href="https://makerworld.com/en/models/28319#profileId-24702" rel="nofollow noopener">A1 mini Scraper and Stylus Holder</a></li></ol>While the hardware for all 3 builds can be self-sourced, I am working with <a target="_blank" href="https://veetec3d.etsy.com/listing/1583763119/a1-mini-accessories-hardware-kit" rel="nofollow noopener">Veetec3D to offer an A1 mini Hardware Kit</a> for all the 3 builds above. It will include the 6x3mm magnets, M3 screws, VHB, thin double-sided tapes, and pre-cut self-adhesive anti-slip pads. Printed parts are not included.&nbsp;The price is 10€ with tracked shipping at 5€. We try our best to keep the pricing affordable for everyone to have easy access to the required hardware for all 3 builds. In addition, parts and labour are sourced within EU. If you like the designs by ThrutheFrame and wish to support his projects, do consider buying this kit. A small royalty will go towards funding project consumables ie. filaments, materials, electricity, coffee, time, software subscription, etc&nbsp;<h3>INTRODUCTION</h3>While unboxing my A1 mini combo, I noticed it needs a Poop Management System (PMS) to collect the filament poop during purging.The simple yet futuristic design of the A1 mini fuels my imagination and hence, my design for the PMS takes on the look and feel of a space station and docking bay.As the A1 mini may be the user's first 3D printer, I set up a few parameters when designing PMS:<ul><li>Aesthetically pleasing (to me), Easy to print/assemble and Fun to use.</li><li>Optimize print time and filament usage</li><li>Must fit onto the A1 build plate of 180x180x180mm</li><li>Will not cause accidental purge clogging</li><li>No support needed</li><li>Printed in PLA.</li></ul>&nbsp;There are 3 PMS options:<ul><li>Option 1 - An eco-friendly design using the filament cardboard box as a ReCycle PMS.</li><li>Option 2A - A fully printed Bin</li><li>Option 2B - For users who print extensively, a printed Chute to guide the poop down into your regular waste bin</li><li>Option 3 - A short bin with a purge guide/baffle that is attached to the purge wiper (recommended)</li></ul>&nbsp;You will need to print a pair of docking bays (D-1) which the PMS will be connected to the A1 mini printer.All the above PMS are magnetically attached with Ø6x3 magnets to the D-1 docking bays.The D-1 will be secured to the A1 mini printer using VHB tapes (or similar mounting tape that is 1mm in thickness).&nbsp;<figure class="image image_resized" style="width:50.09%;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-11-25_64c946113b006.png"></figure><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-09-23_7c8a4c70fff1a.png"></figure>&nbsp;<h3>BOM</h3><ol><li>Ø6x3 magnets - 8pcs</li><li>1mm VHB tape (10x20mm) - 4pcs</li><li>Thin double-sided tape - For ReCycle Bin only</li></ol>** Note that the VHB tape (or any double-sided tape) has to be 1mm thick. This is because the recess I made is 0.8mm, allowing the dock to flush with the printer.&nbsp;<h3>INSTRUCTIONS</h3>Download the 3mf file. The settings are prepared for printing PLA on an A1 mini. If you are printing on a different printer, please make the necessary changes to the settings.The STLs are also available in folders.I designed the parts based on 0.4mm nozzle and 0.2mm layer height. Print in 0.2mm layer height for accuracy.Print plate 1 - Docking bracket. Both front and back docking brackets are required.Print either Option 1, 2A/2B or 3 depending on the configuration you want.If you are using Option 2A/2B. You will need to print plate 3 - Shield top.If you are using Option 3, you will need to print plates 6 & 7<figure class="image image_resized" style="width:60.04%;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-11-24_75bf1beab3e79.png"></figure>&nbsp;Docking Bracket (D-1)<ul><li>Press fit the Ø6x3mm magnets into the docking bracket. The holes are designed for press fitting, hence they are tight-fitting. Please ensure that the polarity of all the magnet are facing in the same direction.</li></ul><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-09-23_1a49a648dbdd6.png"></figure>&nbsp;<ul><li>Paste the VHB tapes onto the docking bracket.</li></ul><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-09-23_4c335b1b1604d.png"></figure>&nbsp;Option 1 - ReCycle Bin<ul><li>Press fit the Ø6x3mm magnets into the ReCycle brackets. The holes are designed for press fitting, hence they are tight-fitting. Please ensure that the polarity is correct. It should be attracting the D-1 bracket.</li></ul><figure class="image image_resized image-style-align-center" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-09-22_m65ncfzfjsze.png"></figure>&nbsp;<ul><li>To attach the spool box, place double-sided tapes on the inner side of ReCycle brackets.</li><li>The dimension of the bracket is based on Bambu Lab filament with spool cardboard box. There might be some size differences with other brands' boxes, but the double-sided tape should hold it well.</li></ul><figure class="image image_resized image-style-align-center" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-09-22_vwvwl5p02bed.png"></figure>&nbsp;<ul><li>Cut the spool box according to the dimensions as seen in the image. No more than 55mm from the bottom and no less than 100mm wide.</li></ul><figure class="image image_resized image-style-align-center" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-09-22_3mxezvsmjkis.png"></figure>&nbsp;<ul><li>Install spool box to ReCycle brackets</li></ul><figure class="image image_resized image-style-align-center" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-09-22_mrjcdjvanqw3.png"></figure>&nbsp;Option 2A Bin & 2B Chute<ul><li>Press fit the Ø6x3mm magnets into the bottom piece. The holes are designed for press fitting, hence they are tight-fitting. Please ensure that the polarity is correct. It should be attracting the D-1 bracket.</li></ul><figure class="image image_resized image-style-align-center" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-09-22_1lf2xxu3vhu2.png"></figure>&nbsp;<ul><li>Glue the top and bottom pieces together. The tongue and grove design will assist in alignment.</li></ul><figure class="image image_resized image-style-align-center" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-09-22_fm7yr0fxfedn.png"></figure>&nbsp;Option 3 - Short Bin with Pruge Guide<ul><li>In addition to plate 1, you have to print plates 6 & 7.</li><li>Install the magnets the same way as all the other bins</li><li>Paste a piece of tape over the area as shown in the image below. During purging, the tip of the purge can still be molten and can accidentally adhere to the wall. The tape helps to reduce the chance of this happening.</li></ul><figure class="image image_resized" style="width:477.812px;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-11-24_9f22dcecbc243.png"></figure><ul><li>Install image</li></ul><figure class="image image_resized" style="width:477.571px;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-11-24_6724c482cd6c7.jpg"></figure>&nbsp;&nbsp;Installing to the Printer<ul><li>Home and turn off printer. Push the toolhead all the way to the left of the X-gantry.</li><li>Attach the D-1 brackets to the ReCycle/Bin/Chute.</li><li>Align it with the X-gantry, make sure the poop will drop into the ReCycle/Bin/Chute and stick the D-1 bracket to the printer body.</li><li>Note that part of the D-1 bracket will slide under the printer.</li></ul><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-09-23_5900afd4bb049.png"></figure>&nbsp;<figure class="image image_resized" style="width:50.04%;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-09-22_qv4fqhizk58s.jpg"></figure><figure class="image image_resized" style="width:49.99%;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-09-22_ciofeugx7tly.jpg"></figure>&nbsp;<ul><li>Turn on the printer and do a homing. Watch and check. The poop shooter should not be pressing down on any part during homing.</li><li>Enjoy a neat and poop-less work table.</li></ul>&nbsp;<h3>VIDS & PICS</h3>Modbot showcased the ReCycle bin version on his A1 stream. Scroll to 26 minutes to see how it works.<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=Fks_nOL2eys"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/Fks_nOL2eys" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;Modbot showcased the bin version 2A, the build plate holder and the stylus+scraper holder.<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=P4EphELNuw8&t=211s"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/P4EphELNuw8?start=211" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;To date, my designs are free to download and use. There is no Patreon or OnlyFan (hahaha). If you like what I designed and want to contribute to my coffee addiction, software subscription and filaments I need for prototyping, a donation of $5-$10 to <a target="_blank" href="https://ko-fi.com/thrutheframe" rel="nofollow noopener">Ko-fi</a> or <a target="_blank" href="https://www.paypal.com/paypalme/shannonheng" rel="nofollow noopener">paypal.me</a> will be greatly appreciated. &nbsp;Another way is to purchase the kit (TBA) from my vendor, we try to make it affordable and a small amount goes to supporting this project in terms of development consumables ( filaments, electricity, coffee, time and my brain cells)&nbsp;<h3>CAVEAT</h3>As with all my designs, Prototyping and testing were conducted to ensure printability and meet my own expectations. However, I understand it may and may not work for you. I would request that you read all instructions and print and install them at your own discretion.

A1 Mini Purge Bucket Bin Poop Management System Bambu Lab

A1 Mini

Gr3dstampaidee

UPGRADE v2 → with label<a target="_blank" href="https://makerworld.com/en/models/459436#profileId-367660" rel="nofollow noopener">IKEA SKADIS TRAY V2 WITH LABEL by Gr3dstampaidee - MakerWorld</a>&nbsp;Little Tray for the Ikea Skadis boardSimple to print&nbsp;accessories add<ul><li><a target="_blank" href="https://makerworld.com/en/models/149809#profileId-163446" rel="nofollow noopener">IKEA SKADIS TOOL HOLDER by Gr3dstampaidee - MakerWorld</a></li><li><a target="_blank" href="https://makerworld.com/en/models/151801#profileId-165723" rel="nofollow noopener">IKEA SKADIS SCREWDRIVER by Gr3dstampaidee - MakerWorld</a></li><li><a target="_blank" href="https://makerworld.com/en/models/169213#profileId-185817" rel="nofollow noopener">IKEA SKADIS SCRAPER BAMBU LAB PEGBOARD by Gr3dstampaidee - MakerWorld</a></li></ul>