user_1512457913

ninjake

I wanted a taller Flush/Purge object for my multi color prints that I could resize to the height I wanted but most dragon eggs were cut half way up so they weren&#39;t maximizing the height potential. I put the threads in the bottom of this egg to utilize the full height as a flush/purge object that could be scaled to match whatever I was printing.&nbsp;I added a negative part for the coin slot so it can be removed if its unneeded, and can also maintain size if you need to scale the egg up or down. The coin slot should be 27mm x 2.5mm for standard US coins. I also left the egg and threaded cap as one object so they both scale together.&nbsp;To utilize this as a flush/purge object select “Objects”, then select the Dragon Egg, click the “Others” tab, then “Flush into this Object”.<img class="image_resized" style="width: 76.71%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000490276/design/2024-06-09_f592d2c1affa.png">

Dragon Egg Coin Bank - Flush Object

dragons

Fletch

Another classic video game that belongs in your game room! Donkey Kong is one of the most recognizable characters and a great game. The frame has a hole in the back for hanging on a wall or you can print out a stand.&nbsp;The platforms, ladders, and fire showed the biggest difference between the 0.2mm nozzle and 0.4mm nozzle.&nbsp;The small pieces can be difficult to print. You really need to have a clean plate and dried filament for those. They press into place on the main model.&nbsp;You can find a stand for displaying on a bookshelf here:<a target="_blank" href="https://makerworld.com/en/models/456210" rel="nofollow noopener">Frame Display Stand</a>&nbsp;I selected the wrong color for the princess&#39;s hair for my prints. They are orange in the profiles.&nbsp;ColorsBlack - Bambu PLA BlackWhite - Bambu PLA WhiteRed - Bambu PLA RedOrange - Bambu PLA OrangeBlue - Hatchbox PLA BlueTan - Overture PLA Plus BrownDark Brown - Hatchbox PLA BrownPink - Elegoo PLA Pink

Donkey Kong Level 1

signs

kerngebiet

Universal holder for any cordless drills and tools. I used it mainly for Makita, but other power tools should fit as well of course.The following Makita tools have been tested so far in the 40mm version:<ul><li><a target="_blank" href="https://amzn.to/43EvbGk" rel="nofollow noopener">Makita DTD171</a></li><li><a target="_blank" href="https://amzn.to/418LxoO" rel="nofollow noopener">Makita DDF484</a></li><li><a target="_blank" href="https://amzn.to/3KH0RSL" rel="nofollow noopener">Makita DDF484B</a></li><li><a target="_blank" href="https://amzn.to/3KKXTMS" rel="nofollow noopener">Makita DHP484</a></li><li><a target="_blank" href="https://amzn.to/3L1Jk99" rel="nofollow noopener">Makita DDF459</a></li><li><a target="_blank" href="https://amzn.to/41iBQUT" rel="nofollow noopener">Makita DHP481</a></li><li><a target="_blank" href="https://amzn.to/3GNdGK7" rel="nofollow noopener">Makita DTW300</a></li><li><a target="_blank" href="https://amzn.to/3UJI2D4" rel="nofollow noopener">Makita DTW302</a></li><li><a target="_blank" href="https://amzn.to/3ojGUKh" rel="nofollow noopener">Makita DHG180</a></li><li><a target="_blank" href="https://amzn.to/3obRMJP" rel="nofollow noopener">Makita DHG181</a></li><li><a target="_blank" href="https://amzn.to/46xfsJ9" rel="nofollow noopener">Festool T18+3</a></li><li><a target="_blank" href="https://amzn.to/40VRPc2" rel="nofollow noopener">Milwaukee 2553 M12 Fuel</a> **</li><li><a target="_blank" href="https://amzn.to/3TgM9rB" rel="nofollow noopener">Milwaukee 2504 M12 Fuel</a> **</li><li><a target="_blank" href="https://amzn.to/3RqUbNf" rel="nofollow noopener">DeWalt DCE530</a> **</li><li><a target="_blank" href="https://amzn.to/40XWAlF" rel="nofollow noopener">DeWalt DCD771</a> ** (seems also to fit in 35mm)</li><li><a target="_blank" href="https://amzn.to/3Gijfj2" rel="nofollow noopener">DeWalt DCF887</a> ** (seems also to fit in 35mm)</li><li>DeWalt DCF885 ** (seems also to fit in 35mm)</li><li>DeWalt DCD985 **</li><li><a target="_blank" href="https://amzn.to/40W9IHO" rel="nofollow noopener">Surebonder Ultra DT-3100FAMZS</a> **</li><li>Porter Cable PCC601</li><li>Porter Cable PCC641</li></ul>The 35mm version fits good for:<ul><li><a target="_blank" href="https://amzn.to/3L8u4HD" rel="nofollow noopener">Makita DDF487</a></li><li><a target="_blank" href="https://amzn.to/41BBmsN" rel="nofollow noopener">Makita DHP487</a></li><li><a target="_blank" href="https://amzn.to/3sUPVMj" rel="nofollow noopener">DeWalt DCD778</a> **</li></ul>The wide version fits:<ul><li><a target="_blank" href="https://amzn.to/46goMlB" rel="nofollow noopener">Makita DWT700</a> **</li><li><a target="_blank" href="https://amzn.to/46eql3g" rel="nofollow noopener">Makita DWT701</a> **</li><li>Ryobi PBLIW01 **</li></ul>Smaller tools will probably better fit in the smaller holder with a 35mm cut-out. If someone needs a different measurement, feel free to leave a comment, I'll see if I can implement this.<h3>Printing</h3>Very easy, no supports needed if printed standing. I used PETG for my prints and three walls with 20% infill. This is very solid. If you want, you can print it with 100% infill and get it even stiffer. But you will need ~220g of filament for this. ;)<h3>Update 04.05.2023</h3>I've added another design for the holder, based on the idea of <a target="_blank" href="https://www.printables.com/@mnemic" rel="nofollow noopener">@mnemic</a>. I has the same sizes as the other, but saves even more filament.<h3>Update 06.10.2023</h3>I've added a wider version of the holder, for Tools like the <a target="_blank" href="https://amzn.to/46goMlB" rel="nofollow noopener">DWT700</a> or <a target="_blank" href="https://amzn.to/46eql3g" rel="nofollow noopener">DWT701</a>. This version is identical to the 40mm default version. Only difference is, that that the inner width is 81mm instead of 70mm.&nbsp;* = Amazon Affiliate Links ** = Information from users who printed the model

Universal cordless Drill Holder/Mount (Makita, DeWalt, Bosch, Festool, ...)

useful 

AdditiveAmerica

Tips on this one are to pre-heat your bed at 55 for about 5 mins before starting. We got best resulrts with Bambu Lab Matte PLA for the red. Quick and easy print that looks really good right off of the printer. Designed for 0.4mm Nozzle.&nbsp;Follow us for more cool downloads!!

GI Joe - Cobra LED Light Box Sign

light box

dfreshkremer

I designed these brackets for storing/displaying DVD & Gaming Cases. I have tested DVDs, Xbox360, PS4, and Wii games. Any case that is the same size will work. I'm not positive about BlueRay cases, and Switch cases are too small. If there is enough interest, I will design a bracket to fit those different sizes - just shoot me a message or comment.&nbsp;You can screw these to the wall in a variety of orientations (will need to hit a stud and/or use drywall anchors). You can also print the Left and Right brackets to make it free-standing when attached together. The free-standing version can also be attached to the wall.  Each shelf/bracket will hold 8 DVD/Game cases. &nbsp;I have also added a little plug that can be printed and inserted into any of the unused screw-holes, if you feel the need.&nbsp;If you want to print the free-standing version, you will need to print a Right & Left bracket. The screw holes are off-set from each other, so you cannot attach two rights or two lefts together.  The holes are offset to make it easier to get a screwdriver in there to attach to the wall, and the offset screw holes also creates a stronger connection. &nbsp;&nbsp;

Multi-Functional DVD/GAME Case Bracket

boys apartment

The Crafty Maker

&#34;You can&#39;t win, Darth. If you strike me down, I shall become more powerful than you can possibly imagine.&#34; ―Obi-Wan Kenobi to Darth Vader —&nbsp;The Duel on the Death Star was a duel between Jedi Master and survivor of Order 66 Obi-Wan Kenobi and his former apprentice and now sith lord Darth Vader on the first Death Star. Obi-Wan sacrificed himself so that Luke Skywalker, Leia Organa, Han Solo, Chewbacca, R2-D2 and C-3PO could escape in the Millennium Falcon. (source: Star Wars Canon Wiki)&nbsp;The design requires the following colors<ul><li>Black</li><li>Bright Blue</li><li>Bright Red</li><li>Light Grey</li><li>Dark Grey</li><li>White</li></ul>These are the filaments I&#39;ve used<ul><li>R3D PLA Black</li><li>Fillamentum ExtraFill PLA Sky Blue</li><li>Fillamentum ExtraFill PLA Traffic Red</li><li>Prusament PLA Gravity Grey</li><li>Fillamentum ExtraFill PLA Iron Grey</li><li>R3D PLA White</li></ul>You can find the box to display this set here: <a target="_blank" href="https://makerworld.com/en/models/13471" rel="nofollow noopener">https://makerworld.com/en/models/13471</a>&nbsp;The box with lid and the wall mountable box are both Patreon/Printables/Thangs subscriber exclusives. (Box with lid also available for individual purchase on <a target="_blank" href="https://cults3d.com/en/3d-model/art/shadow-box-with-lid-thecraftymaker" rel="nofollow noopener">Cults3D</a>)  &nbsp;Print instructions&nbsp;No need for AMS or MMU. All color changes are done using filament swaps.<ul><li>100% infill</li><li>Arachne wall generator  </li><li>Plate 1: - Start with Black  - at layer #4 - 0.80mm swap to Bright Blue - at layer #7 - 1.40mm swap to Bright Red</li><li>Plate 2:  - Start with Dark Grey - at layer #3 - 0.60mm swap to White - at layer #6 - 1.20mm swap to Light Grey</li><li>Plate 3:  - Light Grey</li><li>Plate 4:  - Start with Dark Grey - at layer #3 - 0.60mm swap to Light Grey</li><li>Plate 5:  - White</li></ul>ALL The Crafty Maker designs are protected by Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or reproductions from those files. If you want a commercial license to LEGALLY SELL 3D prints, you&#39;ll need a <a target="_blank" href="https://patreon.com/TheCraftyMaker" rel="nofollow noopener">The Crafty Seller Patreon</a> subscription.

Star Wars Duel on Death Star Shadow Box

Star Wars 

altair3d

The DesignTo keep with the theme, I'm sharing my design of a shamrock earring. The clusters have been a big hit and everyone that has tried my 3D Printed earrings love how light they are. And, this is a great way not to get pinched on St Patrick's day. I've been using these hooks for most of my earrings (https://a.co/d/91hx0Pz).&nbsp;PrintingI generally print these mostly solid, but you can have a few layers with infill. You might want to use ironing to get your top layer smooth.&nbsp;ChatGPT DescriptionIntroducing our Shamrock Cluster Earring – a stunning blend of tradition and innovation. This unique design, 3D printed to perfection, features a cluster of intricately detailed shamrocks, symbolizing luck, faith, and love. Crafted from lightweight and durable materials, these earrings offer both comfort and style. The delicate arrangement of shamrocks creates an elegant and balanced look, perfect for any occasion. Elevate your jewelry collection with this modern take on a timeless symbol.

Shamrock Cluster Earrings

ear rings

Trump 2024 Coaster

 Coasters 

<h2>The Magnets stay inside the print</h2>There are three holes for one 10X3 Magnet or two 6X3 Magnets.Use the ones that you prefer.Those are the magnets that iused :<ul><li><a target="_blank" href="https://www.amazon.es/gp/product/B0CPV7BBKN/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&amp;th=1" rel="nofollow noopener">https://www.amazon.es/gp/product/B0CPV7BBKN/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&amp;th=1</a></li><li><a target="_blank" href="https://www.amazon.es/gp/product/B0BX3VVFGX/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&amp;psc=1" rel="nofollow noopener">https://www.amazon.es/gp/product/B0BX3VVFGX/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&amp;psc=1</a></li></ul>Example:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/826330/2024-03-14_c037994355239.gif"></figure>

Trump 2024 Magnet 

 Magnets 

Amit

One Piece Jolly Roger Skull Keychain Print Profile&nbsp;This keychain uses multicolor filament changes.Print the model twice and glue the parts together for the best result.  Note: this model does not require AMS system and can be printed with manual filament swaps Important Note for AMS Users:Since the AMS Lite unit has only 4 slots, here&#39;s a trick for using 5 colors:After the skin color finishes printing, insert the yellow filament. When sending the file to the printer, choose &#34;skin&#34; for the yellow layer.Picture for example:&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000468035/design/2024-05-18_1ecd9b83e7275.png">&nbsp;&nbsp;Printer Settings:<ul><li>Printer: A1 mini</li><li>Layer Height: 0.2 mm</li><li>Nozzle: 0.4 mm standard</li></ul>Filament Colors change:<ul><li>Layer 0 :    Skin</li><li>Layer 6 :    White</li><li>Layer 9 :    Black</li><li>Layer 12 :  Red</li><li>Layer 14 :  Yellow</li></ul>&nbsp;Print, glue the parts, attach a ring, and enjoy your new keychain!

One Piece skull keychain

keychains

3Dimension Customs

SUPER NICE spinning keychain rack with 608 roller bearing for smooth spinning operation. Tight tolerances for sturdy construction. Each tier uses one bearing prints in 3 plates spins beautifully and doesnt wobble when weight is not centered.

Spinning Keychain Display (Stackable with bearings)

vendor supplies 

Kaleb08

Check out Spider-Man 13 head https://makerworld.com/en/models/398853#profileId-300388&nbsp;Infill-25%

Dummy 13 Deadpool

want to make 

Stag 3D

<figure class="image image_resized" style="width:45.52%;"><img src="https://makerworld.bblmw.com/makerworld/draft/519016/2024-02-10_395c09a6e4cae.jpg"></figure><h2>Goonies Coasters</h2>Hey yoooooou guys! 4 coasters perfect for any fans of the classic film The Goonies. &nbsp;No supports required, glued plate recommended for best finish. &nbsp;

Goonies Coasters

80s must make 

The 3D Imagineer

Large print in place fidget gyro spinner. Designed with tolerances so that it spins smoothly at this size. Two versions, one with smooth sides and one with bumps.

Large Fidget Gyro

toys

EhRabz

You will have to order a gold tinted face shield, and cut it to size to compelete this PLEASE ENABLE SUPPORTS, COULD NOT UPLOAD IT WITH ALL THE SUPPORT PROCESSING TIME

HellDivers 2 Hero of the Federation Cosplay Helmet

helmet/mask

DonMatis

GrinchTree is here, carrying evil plans to takeover your home decoration for Xmas!!&nbsp;Can be used in the following combinations:<ul><li>Half Christmas tree with Grinch filament painting</li><li>Grinch filament painting only, as wall decoration</li><li>Join 2 half's of the Christmas tree model to make a full Christmas tree</li></ul>Added two colour choices Green (to combine with Green Tree) and Grayscale (my traditional style to combine with Silver, Black or White Tree).&nbsp;As usual, print the Filament Painting part with 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;<figure class="table" style="width:98.42%;"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td><figure class="image image_resized" style="width:100%;"><img src="https://makerworld.bblmw.com/makerworld/draft/180301/2023-11-17_dffb8875f5848.jpg"></figure></td><td>Filaments Used:<ul><li> PLA Overture Black</li><li> PLA PolyTerra Charcoal Black</li><li> PLA Overture Cement Gray</li><li> PLA Ziro Dark Gray | or PLA Sunlu Gray</li><li> PLA BambuLab Basic Gray</li><li> PLA Ziro Light Gray | or Overture Light Gray</li><li> PLA Overture White</li></ul>Swap Instructions:<ul><li> Start with Black</li><li> At layer #7 (0.64mm) swap to Charcoal Black</li><li> At layer #9 (0.8mm) swap to Cement Gray</li><li> At layer #11 (0.96mm) swap to Dark Gray</li><li> At layer #14 (1.2mm) swap to Gray</li><li> At layer #20 (1.68mm) swap to Light Gray</li><li> At layer #22 (1.84mm) swap to White for the rest.</li></ul></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/180301/2023-11-17_066bf072866c7.jpg"></figure></td><td>Filaments Used:<ul><li> PLA Overture Black</li><li> PLA PolyTerra Charcoal Black</li><li> PLA Ziro Translucent Green</li><li> PLA Ziro Fluo Green</li><li> PLA+ Esum Green</li><li> PLA Overture White</li></ul>Swap Instructions:<ul><li> Start with Black</li><li> At layer #7 (0.64mm) swap to Charcoal Black</li><li> At layer #10 (0.88mm) swap to Translucent Green</li><li> At layer #21 (1.76mm) swap to Lime Green</li><li> At layer #26 (2.16mm) swap to Peak Green</li><li> At layer #28 (2.32mm) swap to White for the rest.</li></ul></td></tr></tbody></table></figure>&nbsp;Highly recommend to use the provided printing profiles for good results! Looking forward to see your prints!&nbsp;<blockquote>Enjoy my work? Support me by joining my club on <a target="_blank" href="https://www.printables.com/@DonMatis" rel="nofollow noopener">printables</a>. Tier 1 offers exclusive models, while Tier 2 allows you to sell my 3D printed artwork.</blockquote>&nbsp;&nbsp;

Grinch Tree

Christmas

T_WITHE

This airplane model offers a unique and exciting approach, as it is based on the shape of a car spark plug. However, while creative, it may pose a challenge during printing and assembly. :) It&#39;s important to note that you can customize the airplane model to your liking by changing its color, thus personalizing it to match your unique style and preferences, as well as the filament you have available. During printing, I recommend using a 0.2 mm nozzle, but don&#39;t worry if you only have a 0.4 mm nozzle; it can still produce satisfactory results in most cases. However, it&#39;s essential to remember that this is a technical print, so some fine-tuning may be necessary for successful printing. Adjusting parameters such as layer thickness, support, and other printing settings may be crucial to achieving the desired outcome. Therefore, please refrain from giving negative feedback on the printing profile. I hope you&#39;ll enjoy this special airplane model and find it to be an exciting challenge during the printing and assembly process. Wishing you good luck and lots of fun with printing and assembling the airplane! And most importantly, please share your successful prints with us so we can draw inspiration from them!

SparkPlane

gifts

entroisdimensions_figurine

Pidgey is now available, and you have the choice between different file formats:<ul><li>STL</li><li>3mf for Multicolor Bambu Lab printer</li><li>3mf for Multicolor Prusa printer</li></ul>Video of printing the model: <a target="_blank" href="https://www.instagram.com/polymaker_figurines/" rel="nofollow noopener">Instagram</a>, <a target="_blank" href="https://www.tiktok.com/@polymaker_figurines" rel="nofollow noopener">TikTok</a>, <a target="_blank" href="https://www.youtube.com/channel/UCScmlttdRwRbBA61ZGlUVJg" rel="nofollow noopener">YouTube</a> For printing, I used PolyTerra PLA filament from Polymaker: 5 colors version:<ul><li><a target="_blank" href="https://us.polymaker.com/products/polyterra-pla?variant=39574351642681" rel="nofollow noopener">PolyTerra PLA Wood Brown </a>(for body)</li><li><a target="_blank" href="https://us.polymaker.com/products/polyterra-pla?variant=39574351216697" rel="nofollow noopener">PolyTerra PLA Army Beige</a> (for belly, wingtips and eyebrow)</li><li><a target="_blank" href="https://us.polymaker.com/products/polyterra-pla?variant=39574351970361" rel="nofollow noopener">PolyTerra PLA Pastel Candy</a> (for leg and beak)</li><li><a target="_blank" href="https://us.polymaker.com/products/polyterra-pla?variant=39574351282233" rel="nofollow noopener">PolyTerra PLA Charcoal Black</a> (for eye contours and pupil)</li><li><a target="_blank" href="https://us.polymaker.com/products/polyterra-pla?variant=39574352232505" rel="nofollow noopener">PolyTerra PLA Cotton White</a> ( for eyes and claw)</li></ul>To discover which new models will be released next, follow @polymaker_figurines: <a target="_blank" href="https://www.instagram.com/polymaker_figurines/" rel="nofollow noopener">Instagram</a>, <a target="_blank" href="https://www.tiktok.com/@polymaker_figurines" rel="nofollow noopener">TikTok</a>, <a target="_blank" href="https://www.youtube.com/channel/UCScmlttdRwRbBA61ZGlUVJg" rel="nofollow noopener">YouTube</a> Join the Figurines Community on <a target="_blank" href="https://discord.com/invite/r2ujMfEb7S" rel="nofollow noopener">Discord</a> Happy Printing!-----------------------------------------------Printer settings on the Bambu Lab X1C<ul><li>Rafts: No</li><li>Supports: Yes</li><li>Resolution: 0.2mm</li><li>Infill: 10%</li><li>Filament brand: Polymaker</li><li>Filament color: brown, white, black, beige, pink</li><li>Filament material: <a target="_blank" href="https://us.polymaker.com/products/polyterra-pla" rel="nofollow noopener">PolyTerra PLA</a></li></ul>

Pidgey Multicolor

Pokemon 

FilliFuu

Cutie Cloud Jumper Dragon Flexi-Fit (Special Articulated) Model With Multiple Choice Of Wing Designs&nbsp;Based on the dragon cloud jumper from the movie ‘how to train your dragon 2’ - Built with articulated links using my self designed ‘flexi-fit’ chain. The flexi-fit design is an evolving experiment seen in previous models I have released and now been improved upon. It allows a standard articulated design to snap together to remain rigid for posing and support or simply for your own amusement.Improvements include -&nbsp;-Better and easier bridging.-Changed location of socket to allow greater pivoting-Slightly increased join size, tighter fit (can be eased with multiple uses)-Larger and extra walls for strength&nbsp;Still in early development, with your feedback I hope to improve even further for an awesome articulated design that is commonly enjoyed.&nbsp;Note *My First time printing with Bambulab exclusive filamentPrinted with the beautiful PLA Arctic Whisper, PLA Onyx Black Sparkle & PLA Basic Yellow & Red Thank you so much Bambulab for creating this fantastic and beautifully optimized filament.&nbsp;Model contents&nbsp;-Painted and unpainted variations/ miniature scale for A1 mini-Cloud Jumper base model and basic mini wings (for those who wish to use without large wings but choose to fill the wing sockets)-Solid wings, folded and spread, the cover photograph contains one of each, but your free to choose 4 folded or 4 spread if that's what you wish-Flexi wings, purely for fun based upon the ‘NASA fabric’ designs you may have seen by multiple other designers-All STL files associated&nbsp;-Additional profile for the solid wings, to anyone who may encounter issues printing the larger wing. I included this file which lays the wings as flat as possible to the bed, the rear of the wings quality will be likely be impacted and require cleaning, but have zero danger of the print collapsing, print only if you have issues with your tool-head knocking your prints.&nbsp;How to & Assembly&nbsp;Simply print the base model and your choice of wings, selecting whichever printer you are using.&nbsp;Once printed simply insert the wings into the correct sockets being careful not to damage your model, you may wish to lightly trim or sand the ball socket on the wing if required (see pictures & troubleshoot section below) and your done.&nbsp;To use the flexi-fit joins, pull the ball into the clip on each link, can be stiff at first but loosens up each time you use this function.&nbsp;Print is calibrated towards PLA basic. Tested successfully in silk at 120% (CC3C Silk no issues), I am unsure how strong the link will be when printed with silk but its generally not recommended for articulating models.&nbsp;Print Settings&nbsp;Printed multiple times in different sizes & filamentsFor those not using the 3.mf files here is what is recommended…Standard 0.42 wall/ 0.3 used on the outer wall for the main body to increase detail.No brim or support needed on the main file & flexi wings.brim and supports used on the spread wing, the folded wing recommended brim for better corner adhesion4 wall for strength25% gyroid infillz hop 0.4 on the solid wingsWall slowed to 120 however this is entirely up to you depending on what your comfortable printing&nbsp;Troubleshooting&nbsp;-Common problems I often hear can often be easily solved but simply cleaning your 3D print bed so if you have adhesion issues make sure to scrub your plate thoroughly using warm water and soap, rinse with hot water and air dry vertically. IPA is often recommended by most but I personally find standard dishwasher soap to be fine.&nbsp;-Other adhesion issues can be fixed using a brim, but is not recommended unless urgently required or specified in the print settings above.&nbsp;-Tool-head knocks print, I have added an easier print profile with is to be avoided unless required, this profile is labelled 'SAFE' use only if other methods fail. Other reasons for the tool-head knocking the print can be, z-hop required in your slicer settings (turned on by default in my uploaded profiles) Your printer belts may require tightening, carbon rods require cleaning and bearings require lubrication. Calibrate your filament and increases fan speed on your tool-head. If these all fail please use the profile listed earlier.&nbsp;-Ball sockets are too tight to insert, common but the sockets require a tight fit to remain rigid once inserted - its completely fine to lightly sand or even use clippers to slightly trip the ball to allow you to easily insert the socket while remain stable. This may be required depending on which filament you choose to print with.&nbsp;Any other issues please ask and I will help as best as I can, thank you.&nbsp;FIN&nbsp;

Flexi-Fit Cloud Jumper Dragon

Faran3D

First of all, a huge thanks to Jace1969 for the work he did on this helmet. I did try to print it out and had serious issues on our printers due to the limited bed size so I came up with two options - one is scaled down to 87 percent and the other is full size with the main helmet body is quartered with dowel connectors.&nbsp;I've had to upload each plate separately due to failures from exceeding the allowed time, sorry for the inconvenience. I'm also increasing the layer height on the 87 percent helmet body to 0.2mm in order to meet time constraints, mine was printed with .12 layers like the rest of the plates.&nbsp;Other work I've done is removing the front vent for better printing, fixing the side grilles, assembling the side tubes, reticle and faceplate, adding screws and embellishments to the faceplate, back hose housing, side grilles and more. I reworked the lamp to have a removable lens and created a vault boy lens similar to the mod in Fallout 76. The headlamp is hollow so you can add lighting if you want (possibly drill a hole through the helmet, etc).&nbsp;In the end, it's been a lot of work and it's a long print but definitely worth it. I will include the original assembled helmet in the file section as well.&nbsp;Please like, follow and rate this print to show everyone how awesome it is. Bonus points for pictures!

Fallout T-51 Helmet with Lens Options

fallout

Aydian

a new attempt of a Fallout Power amor helmet with Hueforge, I hope you like it&nbsp;the settings in the file are set to Hueforge to ensure relatively good printing&nbsp;Swap Instructions: &nbsp;Start with Black At layer #10 (0.88mm) swap to Gray At layer #24 (2mm) swap to Gray At layer #27 (2.24mm) swap to White for the rest. &nbsp;Colors I used, black, white, grey

HueForge Fallout Helmet

Nightthorn

Found this sword and shield at this link by ZoltanKi on Thingiverse: <a target="_blank" href="https://www.thingiverse.com/thing:3959727" rel="nofollow noopener">https://www.thingiverse.com/thing:3959727</a> <a target="_blank" href="https://www.thingiverse.com/thing:3935757" rel="nofollow noopener">https://www.thingiverse.com/thing:3935757</a> It didn't have a good wall mount for it, so I created one in Tinkercad. Make sure to scale ONLY THE SHIELD to 200% (the uploaded 3mf file is scaled and colored for you). Other than that, everything should fit together and mount nicely. The sword can be slid in behind the shield. I opted to mount my sword between the shield handle and the shield holder, but you can use the cut out option to slide it in further.. i just prefer the handle being out more.

dragons

signs

useful

light box

boys apartment

Star Wars

ear rings

Coasters

Magnets

keychains

vendor supplies

want to make

80s must make

toys

helmet/mask

Christmas

gifts

Pokemon

dragons

fallout

art

Zelda