user_1509136608

gimpelginster

This box fits 100 double sleeved cards. In addition there are compartments to store tokens and small dice and a command stand. In case you don&#39;t need the commander stand, you can also print a version without it (B1 (no commander stand)). That version also comes with two larger storage compartments. There are two versions of the front panel (L1) as well. One is open so you can see the locking mechanism in action and the other is closed if you prefer a cleaner design.&nbsp;<h3>Materials</h3><ul><li>1x M3*20mm flat head screw</li><li>1x M3 nut</li></ul>In case you don&#39;t have these things at hand, you could also use some glue.&nbsp;<h3>Assembly</h3><h4>The Locking Mechanism (L)</h4><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000506783/design/50958647-669e-4f6f-a9ca-239b58a07ce6.webp"></figure><ul><li>parts L1-6</li><li>about 160mm of unprinted filament</li><li>the screw and the nut</li></ul>&nbsp;<figure class="image image-style-align-center"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000506783/design/88616a0e-aa8b-4a0c-9ad1-f6f4d630e16f.webp"></figure>Put L2 into L1 so that it isn&#39;t able to rotate.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000506783/design/cf55a702-6963-49b9-af46-29de173c6c1b.webp"></figure>Place L3 underneath L2.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000506783/design/4b3b39b0-5f20-466a-8866-c25e43ea16c6.webp"></figure>Arrange the parts L5 horizontally and vertically and L6 diagonally inside the mechanism.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000506783/design/79d7619e-7250-4540-b48c-bb940511246c.webp"></figure>Cut the filament to pieces of a litte less than 10mm. You need 16 of those.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000506783/design/613c34b4-099d-4088-84fc-0a2bf435deed.webp"></figure>Stick the pieces of filament into the holes in the parts L5 and L6. Make sure that they are inserted all the way down to L3.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000506783/design/4ef2c7c1-109d-4880-84b2-d4b93faa3cc3.webp"></figure>Put the nut into the hexagonal shaped hole in L4 and slide it up until it is underneath the middle hole.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000506783/design/38b2657e-34b1-4eb9-b9ff-46cf3874f041.webp"></figure>Place L4 onto the mechanism while insuring the nut stays in place and align the open lock icon with the marker at the top if L5 and L6 are retracted.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000506783/design/77f52e9d-8efe-4f57-91e8-6c28cd3569c8.webp"></figure>Flip the whole thing and screw in the screw in the middle.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000506783/design/8f16af97-3f5d-4fed-8c8b-6613ceea187d.webp"></figure>If you turn the knob the bolts should move in and out. In case you can&#39;t turn the knob easily, give the bolts some sanding and try again.&nbsp;&nbsp;<h4>The Commander Stand (C)</h4><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000506783/design/36c43bea-0ff2-44b8-8eb0-dc749232a6e9.webp"></figure>&nbsp;Option 1: 45°<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000506783/design/daf93d61-db16-4187-b1ad-42cc8bc36033.webp"></figure>If you look at C1 with the commander facing in your direction C3 slides into place from the bottom left and C2 from the bottom right corner.&nbsp;Option 2: Upright<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000506783/design/d441872e-99fa-4f3a-8e02-ce16b19c5c82.webp"></figure>For this configuration, you need to swap C2 and C3 and rotate them so that the two strips are at the bottom.

MTG Commander Deck Box v4

H-555666

just a simple keycaplower than other keycapand has no tiltplaese print it with 0.1mm layer height推荐0.1mm层高you might need to print it slower打印速度最好调慢点you need to print like this（I saw a incorrect printing configuration so I add this.）要像这样打印<figure class="image image_resized" style="width: 39.44%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000025221/design/2024-01-01_5db868c71aebf.png"></figure>&nbsp;&nbsp;有人说fdm不能打键帽？来试试这个！几百块的i3调好了都能打好&nbsp;I design this for my <a target="_blank" href="https://makerworld.com/zh/models/25295" rel="nofollow noopener">KeyTester</a>

low keycap

keyboards

luke

Joker&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;The Model is 100x150mm in size Filaments Used: Black Transmission Distance: 0.3 White Transmission Distance: 20&nbsp;Swap Instructions: Start with Black At layer #8 (0.72mm) swap to White for the rest.

mtg

keyboards

art