Big Red

ARdocy

A Usb type c cord holder that doesn't put resistance on the cord. you can print either a plate of four or just one&nbsp;3D Print Settings I didn't need support infill doesn't really matter as it is very small 3 walls

Type C Cord Holder

aquarium

KAKI.3D

A mini watering can for watering a small amount of plants around the house. <ul><li>Lid is pressure fit, but still easy to remove if needed. It is important to print the lid so that water does not spill over the top when pouring. </li><li>Gentle flow of water out of the spout makes watering delicate plants easy. </li><li>Handle allows several comfortable ways of holding. </li></ul>Thanks for clicking on this model! Happy watering.

Mini Watering Can

plants

EPIQ3D

This box provides as a great enviroment for the delicate seedling start.It is designed to sit on a household radiator, and with its many air channels it can provide a varm enviroment all arround each zip lock bag.&nbsp;The seeds (from what ever you choose) is placed between some damped/semi wet kitchen towel/toilet paper and then sealed in a zip lock bag. Then gently roll/fold the zip lock bag, so it fits inside one of the slots of the seed starter.&nbsp;It is not importent to use the sides, they are just there to ensure it donst get knocked of the radiator.(Sides are glued onto the housing)&nbsp;Houseing Measures: 265mm length, 973mm width (without sides).Slots: 245mm length, 12,5mm width.&nbsp;Max radiator width (with sides mounted) is 970mm

Seed Starter

garden

3DDoc

Self Watering Bonsai Planter with a 300ml internal capacity enough to go a week without watering your bonsai tree.&nbsp;The single-piece design prints in place, no need for supports, rafts, or brims! All internal architecture is built-in.&nbsp;The design is minimalist, and has a watering hole which doubles as a visual indicator of the water level inside the planter. The vent hole on the opposite side of the watering hole enables the water to move through all the voids and fill up the pot.&nbsp;I&#39;ve also inserted rolled cotton fabric (8mm cotton string also works) into the holes to aid with the capillary effect. As the soil dries, it sucks up water from the reservoir below. See the image below for reference:<figure class="image image_resized" style="width:42.64%;"><img src="https://makerworld.bblmw.com/makerworld/draft/856098/2024-04-14_561b27aaf01a18.jpg"></figure><figure class="image image_resized" style="width:42.84%;"></figure>The design also has tethering points and can be optionally used if desired. If you will not use the tethering points, a plug is included in the design to close up the holes. See more about securing the plant to the pot in the article here: <a target="_blank" href="https://bonsaitonight.com/2016/12/27/secure-bonsai-pot/" rel="nofollow noopener">https://bonsaitonight.com/2016/12/27/secure-bonsai-pot/</a>&nbsp;If you choose to use the plugs, here is how:<figure class="image image_resized" style="width:42.54%;"><img src="https://makerworld.bblmw.com/makerworld/draft/856098/2024-04-14_587ebc44eaffc8.jpg"></figure><figure class="image image_resized" style="width:42.22%;"><img src="https://makerworld.bblmw.com/makerworld/draft/856098/2024-04-14_4537978e42da7.jpg"></figure>

Self-watering Bonsai Planter Pot V2

bonsai

Tridense

<h4>This is a model I've designed myself. As the model is not behind a paywall, support is appreciated! <a href="https://www.buymeacoffee.com/Tridense" rel="nofollow">https://www.buymeacoffee.com/Tridense</a> </h4>Clip it on to your doors sidepocket or onto the pocket on the back of your seat!Volume of 2 liters (67.5fl.oz.)Insert a small plastic bag to easily empty the canPrint the flipper lid 100% infill, important for balancing the pivotAll the parts are pre-oriented for printability, I used tree supports on all the parts and kept the treshold angle at 29 degrees.<figure class="image image_resized" style="width:50%;"></figure><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/66866/2023-09-22_kt765tldam9a.jpg"></figure><figure class="image image_resized" style="width:50%;"></figure>&nbsp;<h4>Changelog:</h4>2023.09.12: Added a little curve on the hook to make it a little bit more secure (Bin v2)

Car Trash Can

organization

Schichtwerk3D

Unleash the ultimate storage solution for your Hot Wheels® collection with my custom-designed 3D printable modular system! Say goodbye to cluttered spaces and hello to a sleek, customizable organizer that grows with your fleet. My easy-to-print honeycomb modules combined to personal preferences seamlessly, creating a dynamic display that showcases your cars in style. Whether you’re a collector or a racing enthusiast, my system is the perfect pit stop for your prized vehicles. &nbsp;Print, connect, and display – it’s that simple!&nbsp;Rev up your 3D printer and take the pole position in organization with my modular Hot Wheel® storage system. Start your engines, and let’s hit the track to tidiness! 🏎️💨&nbsp;Printing informations:<ul><li>Print size: 13 x 4 x 4.5 cm / l x h x w</li><li>I printed all parts in PLA or PLA+</li><li>The screw adapters need to printed with brim </li></ul>

Modular Hot Wheels honeycomb organizer

user_463225465

Sliding door worm container with loop to hang on belt. Garage style door is easy to open and does not separate from container. Includes a door with holes for ventilation, and one without. Will fit an entire store bought container of worms.Place door in one half of container, apply glue, then install other half of container.*When applying glue, ensure no glue enter sliding door track*

Sliding Door Worm Container

nature

BamBam Design

Great additional Tunnel Set compatible to Hubelino® a Marble run for Duplo®.Its for marbles around Ø25mm.&nbsp;You can choose 2x2, 3x2 and 4x2 length. Every object has his own build plate.&nbsp;After much Test-prints i managed to get the clearance perfect. The bricks should fit like the other ones.I printed with X1C in PLA+, you can try ABS &amp; PET as well! Share your knowledge.While testing get some warping, because of that i added a little brim.&nbsp;Check out other Marble Bricks in my collection: <a target="_blank" href="https://makerworld.com/de/u/2984912453/collections/142907" rel="nofollow noopener">https://makerworld.com/de/u/2984912453/collections/142907</a>And have a look at the full collection &amp; special tracks on my <a target="_blank" href="https://www.patreon.com/BamBamDesign" rel="nofollow noopener">patreon</a>.More Stuff is coming….Like 👍 &amp; Subscribe ✔&nbsp;I create only parts which are missing in the base set! The base parts you could buy #support Hubelino®, here is a affiliate link <a target="_blank" href="https://amzn.to/3Rn1mES" rel="nofollow noopener">https://amzn.to/3Rn1mES</a>&nbsp;Happy printing 😉&nbsp;&nbsp;

Tunnel - Duplo / Hubelino compatible 

lego

I think all fishermen know the problem oof finding waste line on the shore or some old rig or line on the lure you retrieve&nbsp;so i decided to make a little bin to store those waste lines (and other small stuff) i find , so i can take it home easily to throw it away in a proper way.The fishy inside has some holes to help hold the line &nbsp;printed in petg and added a 80% scaled carabiner from <a target="_blank" href="https://makerworld.com/en/models/243919#profileId-260451" rel="nofollow noopener">Flexible Carabiner by Mc2_project3D - MakerWorld</a> &nbsp;Let&#39;s keep nature clean together !