user_1497176859

Catherine Doucet

<h3>Make it known that you love your 3D printer with these awesome kit cards!</h3>There are 4 kit cards for this project (X1C, P1S, AMS, Filament Spools), choose and print what fits your needs.&nbsp;Key Features :<ul><li>Fast prints</li><li>Fits on most printers, even the A1 Mini</li><li>Fast assembly and robust build, just like the real deal</li><li>Tab to hold business cards</li></ul>&nbsp;Printing tips :<ul><li>Make sure your buildplate is as clean as you can get it</li><li>Print with a regular 0,20mm profile, no brim</li><li>AMS needed for this project</li></ul>**If you are printing on the A1 Mini, you'll have to move the prime tower as shown here.<figure class="image image_resized" style="width:40%;"><img src="https://makerworld.bblmw.com/makerworld/draft/571355/2024-02-21_fe6af9c5d32a5.png"></figure>&nbsp;&nbsp;Assembly instructions : Refer to the following guide<figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/571355/2024-02-17_5f0a9f8ec0552.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/571355/2024-02-17_6821a445af085.png"></figure></td></tr></tbody></table></figure><figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/571355/2024-02-17_281892cc7892a.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/571355/2024-02-17_9470122831245.png"></figure></td></tr></tbody></table></figure>&nbsp;See my other Kit Cards in this <a target="_blank" href="https://makerworld.com/en/u/1637693929/collections/670699" rel="nofollow noopener">collection</a><figure class="table" style="width:93.1%;"><table class="ck-table-resized"><colgroup><col><col><col></colgroup><tbody><tr><td><figure class="image"><a href="https://makerworld.com/en/models/199110#profileId-219656" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/571355/2024-02-22_aed62476d4e63.png"></a></figure></td><td><figure class="image"><a href="https://makerworld.com/en/models/199117#profileId-219664" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/571355/2024-02-22_981678af5238.png"></a></figure></td><td><figure class="image image_resized" style="width:94.72%;"><a href="https://makerworld.com/en/models/199115#profileId-219663" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/571355/2024-02-22_49e0776655be6.png"></a></figure></td></tr><tr><td style="border-style:solid;"><figure class="image"><a href="https://makerworld.com/en/models/199105#profileId-219653" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/571355/2024-02-22_6a82afc252a4a.png"></a></figure></td><td><figure class="image"><a href="https://makerworld.com/en/models/170154#profileId-186818" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/571355/2024-02-22_1875c82f3f80c.png"></a></figure></td><td><figure class="image image_resized" style="width:93.9%;"><a href="https://makerworld.com/en/models/132630#profileId-161003" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/571355/2024-02-22_db2dba76d544b.jpg"></a></figure></td></tr></tbody></table></figure>

Kit Card - Bambu Printers & AMS

Kit Cards

Timeshifte

Need to run 4" duct to vent my 3d printers, wanted to run along the walls but didn't want to drill holes and wanted to be able to remove later. Designed the bracket with holes if you want to use screws or Command Brand removable tape model BATH22-ES. Included a print file to print 1 or 4 at a time. They are designed to need no support. I used PLA+ but just about anything will work.&nbsp;Print SettingsMaterial: PLA or PLA+ or ? Layer height: 0.2 mm Perimeters: 3 Top layers: 4 layers Infill: 15% adaptive cubic Supports: no &nbsp;

4" Curved Hangar Bracket

Modellbau

Mattes

Print yourself a mighty articulated orca. It is easy to print in one piece, no supports needed. It works well with basic PLA.If you have a multi color systen, i have included m3u files. Those are pre painted bu you have to adjust your printer Settings. &nbsp;I don't recommend to scale it down because the articulation in the tail gets to small.&nbsp;If you like orcas, check out <a target="_blank" href="https://makerworld.com/en/models/206936#profileId-227041" rel="nofollow noopener">JD3Ds Orca</a><a target="_blank" href="https://www.printables.com/model/770930-articulated-orca-singlecolor-and-multicolor" rel="nofollow noopener"> </a>aswell!&nbsp;Also, if you like Plants, take a look at my new <a target="_blank" href="https://makerworld.com/en/models/244254#profileId-260769" rel="nofollow noopener">Snap Fit Planter Stands</a>

Articulated Orca

Articulated

KuKi__

Update 28/09/23:<ul><li>the main profile was split into two profiles to distinguish them easier and to reduce the time displayed on the profile (since the total time from all plates in the profile are added up): new profile names are 100% scale, … and 100% with holes, …</li><li>some users reported that the original version is too loose and the adapter spins without the spool, thank you for the feedback! I have tested 98%, 99% and 99.5% scaled versions of the adapter and the 98% and 99% are impossible to fit (at least on my eSUN PLA+ cardboard spools). The 99.5% scaled version fits very, very tightly and is almost impossible to remove afterwards but it still fits. If you have troubles with the original (100%) scaled version in the AMS try the new profiles for scaled down versions (99.75% scale and 99.5% scale), I hope those fit better for you :)</li></ul>&nbsp;Original description:Simple AMS adapter for eSUN cardboard spools (20 cm diameter). Prints in 5 min with the supplied 0.28mm profile (10 min with prepare time) . Mounts to spool snuggly as friction fit. Can probably be used for any other 20 cm diameter spool aswell. Modeled to be most efficiently printed with 0.28mm layer height profile.&nbsp;Most of the recent eSUN PLA+ filaments come with cardboard spools. Due to potential jamming, BambuLab does not recommend using such spools in the AMS. I am runing almost exclusively eSUN PLA+ cardboard spools in the AMS and had no trouble so far. However, if you encounter problems here is the quick fix.&nbsp;A few considerations:<ul><li>If you are concerned that the adapter may rotate without the spool when/if it looses friction, I made a second version with three equidistant holes through which you can attach the adapter to the cardboard either with M3x4 screws or by pushing a bit of cardboard through the hole from the inside of the spool. If you are using screws make sure to use short (max. M3x4), flat and countersunk screws since otherwise the AMS may not be able to turn the spool due to collision with the dividers.</li><li>Since the eSUN spools are quite large, the adapter needs to be quite thin to prevent the spool from getting stuck at the top cover of the AMS (1.2 mm rim thickness was already too much). This is why the adapter may seem quite flimsy but it is more than rigid enough for normal use.</li><li>The adapter does not fully cover the filament storage holes and there is enough space to secure the filament as usual</li></ul>&nbsp;Settings in the include print profile:Layer height: 0.28 mm (0.28 first layer)Walls: 2Infill: 100%Top/Bottom shell layers: 3, concentric Filament: eSUN PLA+ white @ 220°C nozzle, 55°C bed, 0.98 flow rate, 0.020 Kno supports, no brim

eSUN carboard spool adapter for AMS (or any 20 cm spool)

eSun Gilament

huminlian

This Octobenchy was designed by SUNLU. It is a variant of the classic Benchy, which is commonly used for 3D printer testing. This model provides a more stringent test for 3D printers. Note that this model is a print-in-place model that needs NO support. If you want 3D print models as perfect as the ones pictured, please 3D print using <a target="_blank" href="https://www.sunlu.com/products/over-6kg-of-pla-pla-meta-3d-filaments-1kg-2-2lbs-fit-most-of-fdm-printer" rel="nofollow noopener">PLA filament</a>. 3D PRINTING SETTINGS PRUSA Slicing Settings Simplify 3D Extuder Nozzle Diameter : 0.4mm / Retraction Distance : 2.4mm Layer Settings Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2 First Layer Settings First Layer Height : 150% / First Layer Width : 100% / First Layer Speed : 50% Infill Interlor Fill Percentage : 10% / Outline Overlap : 30% Additions Raft : OK / Brim : NO / Support : NO Ender Slicing Settings Simplify 3D Extuder Nozzle Diameter : 0.4mm / Retraction Distance : 4mm Layer Settings Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2 First Layer Settings First Layer Height : 120% / First Layer Width : 100% / First Layer Speed : 50% Infill Interlor Fill Percentage : 10% / Outline Overlap : 40% Additions Raft : OK / Brim : NO / Support : NO

SUNLU OCTOBENCHY

Benchy

Hi&nbsp;Just a reminder “It is what it is”.&nbsp;I used P1S + AMS.You probably want to slow down ironing if you want a nicer surface.&nbsp;Please let me know if you need something to design.&nbsp;If you enjoy my work, leaving a BOOST and/or like would mean a lot! Every contribution helps me refine my designs and create new projects.  Thank you!

It is what it is sign - Mental Health helper ;)

Office

Luc1f3r

This is a Version with a 5cm longer collection container.&nbsp;please rate your print expiriance.Thanks

Poop Chute XL version (collection container is 5cm longer)

Bambu

Holder for all colors that use a 26mm bottle

The Army Painter Holder Ikea Skadis

Skadis

Asdfgasdfg

FOSBOS - Free Open Source Bambu Organizational System

FOSBOS

9arr3tt

Print Profile for P1P 5x5 is the largest size that fits on Bambu build plates