Printed it in PLA and opened a pretty stiff lock, and as expected the PLA shows stress lines. But I needed to use quite a lot of force, so I think for regular non stiff/sticky cabinets it should even work with PLA if you are in a jam. I would recommend printing it in PETG atleast, anyway.

Print quality is great, no problems at all, done in about 3,5 h Will add a photo of the finished model once I put it together.

Worked as advertised, simple print. Does make the glass door a lot cleaner looking.

Worked great, slight problem at the top, which creates a fairly jagged surface, but this is more a limitation of 3d printing, rather than a issue with the print profile. Some light sanding will likely do the trick. Other than that, the side surfaces are perfectly smooth as advertised.

Turned out great, slight imperfections, which might very well be caused by me, as I'm new to thus hobby. Other than that quick and easy first print. Time was about 15 min as advertised.