窝好繁啊

MiX&BitS

***Hi guys,for more characters from the Monsterverse come and join our Patreon membership  www.patreon.com/Mixnbits<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000376316/design/2024-06-07_b73f34241a337.jpg"></figure>&nbsp; Update Kong ready to dowload!<a target="_blank" href="https://makerworld.com/en/models/390333#profileId-291275" rel="nofollow noopener">King Kong 13 cm tall by MiX&amp;BitS - MakerWorld</a><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000376316/design/2024-03-23_e84dfa63db5da.webp">*Update: Check the third print profile named single colour split in 2 pieces.I&#39;ll upload soon also the fourth profile “3 colours colour split (tongue and eyes coloured)”.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000376316/design/2024-03-20_2726c20f6aa22.gif"></figure>&nbsp;&nbsp;Hello people!!Here comes something different from the previous cute prints!A sculpture based on the new Godzilla vs Kong movie 2024.It&#39;s a fanart inspired by the new trailer.I hope you like it.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000376316/design/2024-03-17_ca8d9a30bfeed.jpg"></figure>&nbsp;I will post both the print profile in 1 color and a print profile version in 2 colors… Just the basic shades.More shades might be added to teeth and gums but being a small statue might be too much purge for smal details.Enjoy!

Godzilla 2024

哥斯拉

美国

Molodos

A miniature traffic cone for your desk!Features<ul><li>Cool looking</li><li>Multi color (but fast to print)</li><li>Print profiles for 0.4mm nozzle available, too (less details)</li></ul>Recommended print settings<ul><li>Nozzle: 0.2mm</li><li>Layer Height: 0.1mm</li><li>Using an adhesive is not essential, but strongly recommended</li><li>No supports needed</li></ul>You like my work? Consider to <a target="_blank" href="https://www.buymeacoffee.com/molodos" rel="nofollow noopener">buy me a coffee</a> :D

Miniature traffic cone (stackable pylons)

赠品

Team Guapos

I Designed a full set of furniture for a full room of a dollhouse or as an addition to existing dollhouses where some furniture parts are missing.All of the single STL files are included so you can also print single pieces and not the full set.No support is needed for any of the models. The right orientation you can find in the .3mf file.&nbsp;A fitting kitchen Dollhouse set you can find here: <a target="_blank" href="https://makerworld.com/en/models/377041#profileId-276957" rel="nofollow noopener">https://makerworld.com/en/models/377041#profileId-276957</a>&nbsp;If you want any additions to the collection, comment and i try to add them as soon as possible!&nbsp;

Furniture Set Dollhouse Play Set

家具

Craft Kiwi Designs

I couldn’t believe this wasn’t already an available model! Here’s my version of the Tags and Crests found in Digimon Adventure, so you too can relive your dreams of being a Digidestined.&nbsp;The tag is approximately 53mm tall, perfect for a necklace or keychain.&nbsp;This prints as two separate pieces that can be combined after. The print profiles are set up so all the crests are on one plate and the tag is on the other.&nbsp;It has quite a tight friction fit to hold the crest in place.&nbsp;For best results, use a 0.2mm nozzle. It should still be possible with a 0.4mm nozzle but be aware it will lose the finer details.&nbsp;Behind the model&nbsp;I made this in SolidWorks with a variety of reference images, before printing on my BambuLab P1S. The tag is in eSun Silk PLA, the crests are eSun PLA+.

Digimon Adventure: Tag & Crest (Interchangeable)

数码宝贝

Nakozen

The Imperial AT-ST “Chicken Walker” scouts ahead on the lush moon of Endor, seeking out any potentially rebellious individuals attempting to halt the Emperor's efforts. Fast moving and nimble for its size, and still extremely deadly with a half-decent pilot, it is not something you would want to be caught out in the open with, Jedi or not. Ohhh god is that a teddy bea--aaaarrghkk---!! This is a kit I've been wanting to make properly for a few years now, and finally sat down to give it a real attempt. I hope I have done it justice!-----------------------------------------------Some parts are super small, so some care is required. Additionally the kit should scale up just fine, although untested as of yet!On folding the main body panels, it is okay if one or two panels sheer off, it will still stick together, but if 3 or 4 fail, a little glue may be required for the roof piece! (If this is a big enough issue I may add another connection, I just wanted to preserve the top detailing.)Included is just the regular fit for the time being, try setting outer walls to print first.You can make it EVEN TIGHTER by increasing the Z-scale by 15%. For those uninterested in the card format, there is a frameless variant included! ------------------------------------------------------------Print at 0.2mm layer height, there really is no benefit from printing at a higher resolution and it could affect the fit. Be sure to print with 100% infill for it to hang straight as the weight distribution can be sensitive ------------------------------------------------------------My other Star Wars themed kits:X-WING - <a target="_blank" href="https://www.printables.com/model/143177-x-wing-kit-card-redux" rel="nofollow noopener">https://www.printables.com/model/143177-x-wing-kit-card-redux</a> Y-WING - <a target="_blank" href="https://www.printables.com/model/289165-y-wing-kit-card-redux" rel="nofollow noopener">https://www.printables.com/model/289165-y-wing-kit-card-redux</a> B-WING - <a target="_blank" href="https://www.printables.com/model/143174-b-wing-kit-card" rel="nofollow noopener">https://www.printables.com/model/143174-b-wing-kit-card</a> TIE Advanced - <a target="_blank" href="https://www.printables.com/model/143178-tie-advanced-kit-card" rel="nofollow noopener">https://www.printables.com/model/143178-tie-advanced-kit-card</a> Valen-TIE/N - <a target="_blank" href="https://www.printables.com/model/393740-valen-tien-fighter-kit-card" rel="nofollow noopener">https://www.printables.com/model/393740-valen-tien-fighter-kit-card</a> Tauntaun - <a target="_blank" href="https://www.printables.com/model/143208-tauntaun-kit-card" rel="nofollow noopener">https://www.printables.com/model/143208-tauntaun-kit-card</a> V-19 Torrent - <a target="_blank" href="https://www.printables.com/model/143196-v-19-torrent-kit-card" rel="nofollow noopener">https://www.printables.com/model/143196-v-19-torrent-kit-card</a> Tri-Fighter - <a target="_blank" href="https://www.printables.com/model/143197-tri-fighter-mini-kit-card" rel="nofollow noopener">https://www.printables.com/model/143197-tri-fighter-mini-kit-card</a> Looking to try your hand at making your own Kit Card? Follow this simple guide to get a head-start! <a target="_blank" href="https://3dwithus.com/how-to-design-kit-card-models" rel="nofollow noopener">https://3dwithus.com/how-to-design-kit-card-models</a>------------------------------------------------------------<h3>Interested in selling?</h3>All files are marked as non-commercial along with any remixes created from them.If you are interested in selling physical prints of my models anywhere, be it online or offline, you can obtain a sales license when subscribed to Tier 3 of my Ko-Fi memberships! <a target="_blank" href="https://ko-fi.com/nakozen/tiers" rel="nofollow noopener">https://ko-fi.com/nakozen/tiers</a><h3>Want to show me you love me? Buy me a "coffee"...! <a target="_blank" href="https://ko-fi.com/nakozen" rel="nofollow noopener">https://ko-fi.com/nakozen</a></h3>

AT-ST Walker Kit Card

星际大战

我的妹妹最可爱

成龙历险记龙符咒，调整好了距离，能完美插入，感兴趣的朋友可以打一个玩玩

成龙历险记-龙符咒

成龙历险记

The 3D Imagineer

Print in place gyro fidget spinner. You can spin it like a traditional fidget spinner or just spin the different gyro rings.&nbsp;Update: Added a new version. The new version is a little smaller and has improved tolerances. I updated the print profile with both versions so you can print the version you like best.

Fidget Gyro Spinner

摆摊

SMichaud

Lot of bearing.Important print in 0.12 or lower, if you print bigger (0.16/0.2/0.24 etc..) the pieces will merge.&nbsp;For imperial bearing → <a target="_blank" href="https://makerworld.com/en/models/146209#profileId-159197" rel="nofollow noopener">https://makerworld.com/en/models/146209#profileId-159197</a>&nbsp;

Print in place Bearing metric

工业

LemonArts

This is my remix of Hugo's model. optimized for Bamboo and PLA. The cards fit in perfectly and are easy to slide out. The tolerances on the model have been adjusted. * Space for 5 Cards* Clip for Cash 14.01.2024: added Cascade card wallet with attachment loop / key loop <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/401446/2024-01-14_d38c7d328ce05.gif"></figure> 09.01.2024 added a PETG Version longer holding power like the PLA version.The cards are still easy to push out <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/401446/2024-01-09_bc702955d2a2c.gif"></figure><figure class="image image_resized" style="width:52.14%;"><img src="https://makerworld.bblmw.com/makerworld/draft/401446/2024-01-09_c67908fa2dd3a.jpg"></figure> 02.01.2024 added a 10x card Version. you can find here:<a target="_blank" href="https://makerworld.com/de/models/120020#profileId-129164" rel="nofollow noopener">https://makerworld.com/de/models/120020#profileId-129164</a> 31.12.2023 added Lager MONEY version: for those whose cards are stuck 30.12.2023 added Lager version: for those whose cards are stuck <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/401446/2023-12-29_5c60813c877f4.gif"></figure>

Cascade card wallet (Print-in-place) optimized

打印排队

Galactic Armory

Make your own Galactic Armory themed Spartan helmet!&nbsp;Based off concept art from GC_ConceptArt, this is an envisioning of the classic Galactic Armory logo with a Halo Spartan helmet!&nbsp;The faceplate is able to be removed with the help of 10mm x 3mm circular magnets!&nbsp;Includes both assembled and pre-separated versions for easy printing.&nbsp;Use the visor cutout template to trace an outline on your visor material. Then slot the cut out shape into the pre-modeled ridges on the inside of the helmet!&nbsp;You'll also find the large parts have been pre-cut for smaller printers.&nbsp;If you would like to use these files for commercial use, please subscribe to the "Specialist" tier of my Patreon here: https://patreon.com/galacticarmory

Galactic Armory Spartan Helmet

面具

蛋蛋66

<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=sMDyZqvvY9g&t=87s"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/sMDyZqvvY9g?start=87" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>聚宝塔：长，宽，高-不限高度（40cm*36cm*N）采用仿中国古建宝塔外形，在保留仿古建宝塔外形的基础上，优化结构设计，使其更加稳固且易于拆卸拼装。整体模型还原了千年榫卯工艺和古建筑的力学结构。可以考虑加入灯光，提升模型的观赏性和互动性。Jubao Pagoda: Length, width, height - unlimited height (40cm * 36cm * N) adopts the shape of a Chinese ancient pagoda. While retaining the shape of the ancient pagoda, the structural design is optimized to make it more stable and easy to disassemble and assemble. The overall model reproduces the millennium old mortise and tenon craftsmanship and the mechanical structure of ancient architecture. Consider adding lighting to enhance the viewing and interactivity of the model.&nbsp;<figure class="media"><div data-oembed-url="https://www.bilibili.com/video/BV1ta4y1C7mY/?spm_id_from=333.999.0.0&vd_source=32908167f1f9e82aa66f57bd8173aa4e"><div class="ck-media__wrapper" data-oembed-url="https://player.bilibili.com/player.html?bvid=BV1ta4y1C7mY&autoplay=0&poster=1"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://player.bilibili.com/player.html?bvid=BV1ta4y1C7mY&autoplay=0&poster=1" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>

中式榫卯结构古建筑（Chinese style mortise and tenon structure ancient architecture）：聚宝塔

shawn.mek

My son requested some wolverine claws, and since I had just printed a print in place spring box I was like ‘I bet we could make some claws spring loaded!’&nbsp;Famous last words…&nbsp;Fortunately (or unfortunately?) the spring idea proof of concept worked immediately:<img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-13_5780d7bc20069.gif">&nbsp;So we were off! And then a billion iterations later, we get to this first release version.&nbsp;It's a bit tricky to assemble, but I'll try to get some how to's in the future if needed. Please leave feedback on what I might do to enhance it - or let me know points of failure that I can strengthen.&nbsp;Thanks!&nbsp;For Assembly, you may want to watch this youtube where Uncle Jessy successfully assembles it (<a target="_blank" href="https://youtu.be/PM3DsiuDIDw?si=Ku4l55NfCI200hou" rel="nofollow noopener">https://youtu.be/PM3DsiuDIDw?si=Ku4l55NfCI200hou</a>). &nbsp;HAND STRAP - This was for my son, and I actually tried using the Polycam photogrammetry app on my phone to 3D scan his hand, and then made the strap using that :). It worked suprisingly well for HIS hand. I scaled up the strap for bigger hands, but you can also cut or delete a piece to make it bend and fit different sizes.&nbsp;&nbsp;ASSEMBLY&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_a7a31b9c9d4a4.jpg">&nbsp;The brake.&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_2e8e8b3f94888.jpg">Stick the ‘trigger’ down through the brake sideways and then turn it (somewhat gently, don't break :))<img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_034ac41c92e4e.jpg">&nbsp;Put the springs into the brake<img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_23fc35f069994.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_0a283aa1fd7bc.jpg">&nbsp;TRICKY PART -No to putting the brake on this way (it won't have enough space to release):<img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_ecf791bfd8bc5.jpg">Put it on the other side (I've never had to glue, but tolerances may necessitate that - the mechanism itself actually holds it together pretty well regardless), and then stretch/pull it over to the front (the springs will now have arm length and springiness for the brake mechanism):<img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_d14067333d86c.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_1106349f4ddcc.jpg">Now put the claws through while holding the brake out of the way. Depending on tolerances you may need to move the claws in and out of the guides to break it in:<img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_1479d7245892c.jpg">Snap the springs into claws and top plate, and then top plate into bottom plate:<img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_0c259e60d24bd.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_a30a3d439e271.jpg">Pull down brake and pull out claws, slip strap around extended claw spring and onto the assembly:<img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_d40f2a0eb72e9.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_0233270d2b7b3.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_aebe1855448f5.jpg">&nbsp;&nbsp;

Wolverine Claws - Retractable, Spring-loaded, Trigger (No extra non printed parts needed)

金刚狼

rclaus

I made this in around 1998 in Softimage, some ZBrush detailing added later, I use this as a test model for new filaments, nozzle sizes mainly. Also could be useful as a decorative piece, looks neat when you have several standing together in a group sniffing each other…&nbsp;Tail can be heated with a lighter (shortly) then bend to your liking.

Dachshund

mango

MichaelBMF

Grogu, also known as Baby Yoda, from the Disney series ‘The Mandalorian’ I added 3 Version:<ul><li>50mm Height, Colored, Printed with 0.2mm Nozzle</li><li>50mm Height, One Color, Printed with 0.4mm Nozzle</li><li>150mm Height, Colored, Printed with 0.4mm Nozzle</li></ul>

Colorized Grogu  (Baby Yoda)

尤达

PrintMason23

Model by Makerbot - The T-Rex Skull.. Remix of T-Rex Skeleton by Makerbot&nbsp;Big Tyrannosaurus Rex Skull!Scaled up to 170%!As Big as X1/P1 Build Size Will support!.16 Layer Height..No Supports, 10% Gyroid Infill, 2 walls, 4 Top & Bottom Shell Layers&nbsp;**Change Log**&nbsp;02.01.2024   Added New Profile to alleviate Issue Some Users were having with skull failure on nose portion due to possible adhesion and/or speed issues<ul><li>Slowed Outer Wall & Inner Wall by 25% (150mm/s)</li><li>Slowed Sparse Infill, Internal Solid Infill, & Gap Infill by about 50% (150mm/s)</li><li>Slowed Acceleration for 1st Layer, Outer Wall, Top Surface & Sparce Infill down 50%</li><li>Also Added a 15mm Brim on Skull top for added build plate contact for better adhesion and print stability.</li></ul>**Working next on solving the lack of stand issue and making it easier to assemble.**Also Testing a New Version!&nbsp;I appreciate your feedback. Helps me to improve on things to make a better experience for you all. Definitely learning a few new things as I go so it will only get better!Your Downloads & Makes help to support more models and future creations to come.Please post Your Makes and Comments! I do my best to reply to everyone.I Love seeing how your Prints turn out!&nbsp;**Happy Making**

T-Rex Skull

石雕

FankoPRINT

Venomized spiderman head. The best headphone holder for lovers spiderman or venom! Print it, follow, like.

Venom/spiderman Headphone stand

漫威

Protoprints

This mini hueforge was designed as a decorative piece that fits on my <a target="_blank" href="https://makerworld.com/en/models/433163#profileId-337815" rel="nofollow noopener">Everfresh Car Air Freshener System</a>.It also looks pretty good as a standalone piece. Dimensions are 50mmx50mm&nbsp;This is meant to be printed with a 0.2mm nozzle. &nbsp;InstructionsPrint at 100% infill with a layer height of 0.06mm with a base layer of 0.12mmFilaments Used: Generic Black, Blue, Sky Blue, Orange, White PLA+Swap Instructions: Start with Black At layer #5 (0.36mm) swap to Blue At layer #8 (0.54mm) swap to Sky Blue At layer #18 (1.14mm) swap to Orange At layer #20 (1.26mm) swap to White for the rest. The provided print profile has been set to print out of the AMS in the following order:Slot 1 → Slot 2 → Slot 3 → Slot 4 → Slot 1Change filament in Slot 1 from Black to White anytime after layer 5 and before layer 18.&nbsp;Users with no AMS should change color swaps to pauses and manually swap filament.&nbsp;Happy printing! Share your makes!

Great Wave Mini Hueforge (0.2) - For Everfresh

brianyang315

default setting for a1 mini works fine

frieren monster chest 葬送的芙莉蓮 寶箱怪

葬送的芙丽莲

XiXing

王国地出擎天柱大黑枪5mm接口Transformers Optimus Prime Gun

王国地出擎天柱大黑枪5mm接口Transformers  Optimus Prime Gun

擎天柱

Captain_May

This is a fully articulated skeleton from the Tinkercad website that i edited to fit my idea.

fully articulated skeleton

人骨

Ukdavewood

Update 2/2/24Added Extra profile containing optional underwater parts and a stand - which can be bolted on the bottom with 3xM4 x 15mm Cap head screws.&nbsp;&nbsp;&nbsp;Update 13/2/24Updated the underwater print profile to move the section breaks so that they line  up with the main waterline model.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/530902/2024-02-13_4007ddc013b068.jpeg"></figure>Also doubled up  the tiny azipod motor parts - as it doesn't add much to print time and will then give some spares in case of breakages or printing issues.&nbsp;Also slightly improved the adaptive layer height settings.&nbsp;&nbsp;Update 4/1/24.I have added the underwater hull part of this ship to my 1:1000 scale version here<a target="_blank" href="https://makerworld.com/en/models/15006#profileId-14776" rel="nofollow noopener">https://makerworld.com/en/models/15006#profileId-14776</a>&nbsp;<figure class="image image_resized" style="width:29.97%;"><img src="https://makerworld.bblmw.com/makerworld/draft/530902/2024-01-04_4a0113e166b658.jpg"></figure>If there is any interest in a version scaled for this 1:500 version please let me know via the comments I will create one.&nbsp;&nbsp;&nbsp;Scaled at 1:500 and mutli coloured - this model is multi plate, quite large and requires a lot of time to print.It is recommened that people try one of the 1:1000 or 1:1250 version first - which print without supports on a single plate.&nbsp;Updated 31/12/23New version of the Dome on deck18 added as a 2nd + 3rd plate on the same print profile as was uploaded on 21/12&nbsp;Updated 21/12/23Alternative version of deck 8 included in seperate profile - to avoid issues with lighting channel showing through very thin deck layer.&nbsp;Updated 9/10/23:Corrected a problem with a duplicate part from deck 15 being present and one part from deck 14 being missing.See Plate 14.&nbsp;Updated 30/9/23:Corrected a problem with the port side of the hull section not slicing correctly.&nbsp;Also note that since releasing these complex multi part 1:500 ship models I have found that the BL printers are capable of printing these models quite well at a 1:1000 scale on a single plate. Seperate entries in Makerworld have been created for the 1:1000 versions.&nbsp;&nbsp;Update: 8/9/23:A new version of the model has just been updated that addresses points 2,3,4 & 5 below.&nbsp;&nbsp;Update: 18/8/23Following feedback from the 2 successful end user prints of this model I am planning to make the following updates:<ol><li>Enhance the build instructions - I have already made some updates to bring these instructions in line with the slightly more detailed ones on printables.</li><li>Thicken up some of the more fragile top decks - that are quite difficult to remove from anything other than a cooled down textured sheet</li><li>Change the settings in the build files to increase the use of brims - to avoid corner lift off</li><li>Include built in part numbering on the main deck parts.</li><li>Provide a version of the centre hull section with slightly wider tollerances - to make it easier to push parts together</li><li>Provide simpler smaller scale versions (1:1000) of this ship for single plate, single colour and multi colour printing.</li></ol>&nbsp;Third ship in a series of Seven 1:500 scale Models of P&O Cruise Ships - Iona - for personal use only.&nbsp;Iona is the largest P&O Cruise Ship currently in service.&nbsp;Designed for multi colour printing on a Bambu Lab X1C or P1P with 8 Colours (2 x AMS).&nbsp;STL files not available individually as there are too many.Designed using Fusion 360.Model is approximately 3 build plates long - so needs to be printed in separate sections which are slotted together at deck level, then each deck is bolted together using M4 Cap Head Screws.Printing will take well over 60 hrs in total - in separate plates which average about 2 hrs printing time each - but some of the more complicated plates take in excess of 13 hours to print.&nbsp;For reference here are the filament colours I have been using in order of quantity - with a best guess at Bambu Lab equivalentseSUN PLA+ Filament 1.75mm, PLA Plus 3D Printer Filament Cold White eSUN PLA+ Silver SunLU PLA+ Blue SunLU PLA Red 1kg 1.75mm PLA 3D printer filament Printer - With coil (Gold Color) SUNLU 3D Printer Filament PLA+ Plus Grass Green Aldi Balco Blue 1kg SunLU PLA Yellow Bambu Lab Orange ICE Filaments ICEFIL1PLA104 PLA filament, 1.75mm, 0.75 kg, Barbaric Brown eSUN PLA BLACK  With the quantity of white being about 10x the rest.My best guess at equivalent Bambu Lab Filaments to these would be:Bambu Lab PLA Basic Jade White Bambu Lab PLA Silk Silver Bambu Lab PLA Basic Blue Bambu Lab PLA Basic Red Bambu Lab PLA Basic Bronze Bambu Lab PLA Basic Green Bambu Lab PLA Matt Ice Blue Bambu Lab PLA Basic Yellow Bambu Lab PLA Basic Orange Bambu Lab PLA Basic Brown Bambu Lab PLA Basic Black&nbsp;Around 22 M4x16 and 4 M4 x 10  &nbsp;Build instructions. (updated 18/8/23)&nbsp;<ol><li>Print plates in the order presented. Writing deck numbers onto printed parts can help with organisation. **</li><li>Recommend textured plate is used for most prints - especially those with only 1 layer in some parts - such as deck 19 Bow. Cool plate however useful for very long thicker prints - such as Hull if being able to pause prints overnight is a requirement. **</li><li>For the thicker hull sections the dovetail joints are quite tight so a small amount of trimming of the dovetails may be required to get the pieces to slot together.</li><li>On the stern section of the hull I have included some slight overlaps to stop corners from being round that will need to be trimmed off. **</li><li>It is recommended that a small hammer is used to gently tap the dovetail joints together - going slowly from side to side - until the sections are flat.</li><li>Completed decks can then be bolted together using the holes with slots for screw tops.</li><li>Lifeboats need to be slotted into deck 7 tabs - it may be necessary to slightly widen the slots in the lifeboats with a screwdriver.</li><li>The canopy on deck 19 also slots into some fairly tight holes - so again these might need to be prized open slightly with a small screwdriver</li></ol><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/530902/2023-08-18_a2c7dd1a41697.jpeg"></figure>&nbsp;&nbsp;Model has only been printed once so far, and was re-sliced for this upload.Further details of the design and built process are available on the Bambu Labs forum AMS section.Details of this model will also be posted on<ol><li>The Bambu Lab Official Facebook Group</li><li>The P&O Facebook Group</li><li>The Ship Models Facebook Group</li></ol>&nbsp;This is a personal project. I have no connection to P&O Cruises or Carnival Corporation other than being a customer.This version is released under a CC Non Commercial No Derivatives license due the P&O Cruises branding.&nbsp;&nbsp;f360 ref: iona 5b Arvia V1 S500 v122. 30/9/23  &nbsp;&nbsp;&nbsp;

P&O Cruises Iona 1:500 Multi part

PhaseworksCA

Bring a touch of humor and anti-hero charm to your collection with this low poly geometric 3D print of Deadpool shrugging. The design captures the character's irreverent personality and iconic costume in sharp, angular lines, creating a playful yet striking portrayal. Perfect for fans of the merc with a mouth and lovers of minimalist art, this piece embodies Deadpool's unique blend of comedy and action in a modern, abstract form.&nbsp;&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/764919/2024-03-25_9951300e07d46.png"></figure>&nbsp;<figure class="image image_resized" style="width:99.3%;"><a href="https://www.printables.com/@PhaseworksCA/store" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/764919/2024-02-27_cbac20a9d0926.png"></a></figure>

Geometric Low Poly Shrugging Deadpool

死侍

xsynaticc

Voronoi Dog models, Approximately 117 mm tall and 100mm wide. Best printed in PLA with brim, no support needed, set auxiliary part cooling fan to 100%. Scale the model to your heart's content. You can try printing with Support for the muzzle as those parts are floating. It works without but can be a bit droopy, though nothing you can't snip away for a clean result.

Voronoi Dog Statue

狗狗

FFaria3D

A simple and beautiful decoration with tulip to offer mothers on Mother&#39;s Day

Happy Mother Day Tulip Flower

花瓶

AlexY_

Update: I&#39;ve finally gotten around to finishing up the motorized version of this design. Check it out here: <a target="_blank" href="https://makerworld.com/en/models/495262" rel="nofollow noopener">https://makerworld.com/en/models/495262</a>&nbsp;<figure class="media"></figure><figure class="media"></figure>This is a complete rework of my functional escalator model from 2022. It is a ground-up redesign incorporating a bunch of significant changes, including the following:<ul><li>Chain links now sit directly against the escalator steps. This allows the entire chain and step assembly to be put together in 1 step and reduces the sliding friction experienced by the mechanism.</li><li>An assembly jig is provided that holds the steps together when installing chain links, reducing assembly time and difficulty. No more partial disassembly to get the chain on both sides of the steps.</li><li>Fine-tuned the sizing and geometry of the moving parts. The model incorporates larger and fewer steps resulting in a lower part count. Larger pins on the steps reduce friction and make the parts easier to print.</li><li>Steps now have a realistic groove pattern.</li><li>Variants of the parts are provided that eliminate all M3 nuts, with the bolts going directly into the plastic, reducing part count and simplifying assembly. Note that the hex nut version is still available if you&#39;re concerned about stripping out the holes in the plastic.</li></ul>This model comes in two variants:<ul><li>A standard size, containing 30 steps, which is slightly bigger than the 2022 design.</li><li>A mini/short size, containing 22 steps.</li></ul>If you want to make an even smaller, palm sized fidget version, I&#39;ve created a much smaller variant here: <a target="_blank" href="https://makerworld.com/en/models/447059#profileId-353657" rel="nofollow noopener">https://makerworld.com/en/models/447059#profileId-353657</a>  &nbsp;If you&#39;d prefer buying one assembled, I&#39;m now selling these on Etsy! Visit my store here: <a target="_blank" href="https://www.etsy.com/shop/AYMakes/" rel="nofollow noopener">https://www.etsy.com/shop/AYMakes/</a><h3>Parts required</h3>Non-Printed<ul><li>8 M3x14mm bolts (can substitute these for longer bolts, within reason)</li><li>5 M3x10mm bolts (can also substitute these for longer bolts)</li></ul>PrintedThe standard size and mini escalator share all parts except for the track guides and handrails. You will need:<ul><li>30 steps for standard size, or 22 steps for mini size</li><li>60 chain links for standard size, or 44 chain links for mini size</li><li>2 end caps</li><li>1 left outer track guide and 1 right outer track guide</li><li>1 left inner track guide and 1 right inner track guide</li><li>1 left handrail and 1 right handrail</li><li>1 spindle</li><li>1 drive-side sprocket and 1 non-drive-side sprocket</li></ul>I recommend printing the steps, sprockets and spindle in a different color from the rest of the model to provide some contrast.<h3>Print settings and tips</h3>Although easier to print than the 2022 model, this design is still relatively challenging to print and works best with a well-calibrated printer.<ul><li>0.15 layer height or lower strongly recommended for steps and chain links. 0.2mm will work for the other parts, though lower layer heights may be smoother.</li><li>Infill recommended to be 5% or higher.</li><li>No need for supports, rafts, etc. The steps may be prone to warping due to the thin pins on the sides, so make sure your bed is very clean to give it its best chance of sticking.</li><li>I only tested this model with PLA, but PETG and others may work too. It is critical that stringing and blobbing be kept to a minimum on all parts that slide against each other (chain links, steps, track guides), so tune your retraction and pressure advance values the best you can.<ul><li>Important note: Some filaments seem to have higher sliding friction than others, especially ones with metallic glitter added in, such as Prusament&#39;s Galaxy filament colors. For best results avoid printing the track guides in these materials.</li></ul></li><li>Make sure your bed leveling is dialed in very well when printing the steps and chain links. After printing, verify that the chain links are able to slip onto the steps without resistance. Any friction here will make it harder to move the mechanism in the assembled model.</li></ul><h3>Assembly guide</h3><figure class="media"></figure><ol><li>(Not shown in video) If applicable, press M3 nuts into the inner track guides (2 locations each) and end caps (4 locations each). If they don&#39;t fit tightly, dab on a small amount of glue to keep them in - hot glue or superglue should work. This will make assembly easier.</li><li>Place all steps into the assembly jig. Ensure that the longer pins are closer to the outer edge of the jig, and that the flat sides of the steps are facing outward as well.</li><li>Place chain links onto the longer (outer) pins. These should be placed such that the links alternate between being below or above its neighbors.</li><li>Place the right inner track guide into the center of the steps. Make sure the circular hole (which will hold the spindle) is on the top (right) end and that the inner (shorter) pins all rest inside the inner groove, with the outer pins sitting against the outer edge of the guide.</li><li>Place the right handrail guide on top of the assembly. The outer pins of the steps should all be contained within the guide.</li><li>Place the drive (right) side sprocket onto the top right side of the right inner track guide. The sprocket teeth should mesh with the outer pins of the steps.</li><li>Place the right outer track guide on top of the assembly. Verify that all the step pins are contained within the part, and that the outer track guide sits flush against the handrail guide and inner guide.</li><li>Attach the inner and outer guide using 2 M3x10mm bolts.</li><li>Flip the whole assembly over so that the assembly jig faces upwards. Carefully remove the assembly jig, making sure that none of the steps get pulled upwards with it. If this occurs, repeatedly tap on the jig while slowly lifting it to free the stuck steps.</li><li>The other side of the step piece pins should now be facing upwards. Repeat step 3 for this side.</li><li>Repeat steps 4-7 for this side. When installing the sprocket, make sure that the holes and teeth line up with the sprocket on the opposite side.</li><li>Insert the spindle from the right side, passing through both sprockets and both inner guides. The spindle should fit into the cutout in the non-drive-side sprocket. Attach the non-drive-side sprocket to the spindle using a single M3x10mm bolt.</li><li>Attach the end cap pieces to the top and bottom ends of the model. Secure each one with four M3x14mm bolts.</li><li>Give the knob a turn to see if the mechanism moves smoothly. If not, proceed to the troubleshooting steps below.</li></ol>Troubleshooting<ul><li>Mechanism completely frozen<ul><li>Make sure all the lower (shorter) pins of the steps are sitting within the groove of the inner guides.</li><li>Check the same thing for the outer/handrail guides.</li><li>Ensure that all the steps are installed in the correct orientation. Refer to the picture in step 2.</li><li>Verify the chain is attached properly to all steps.</li></ul></li><li>Mechanism works but steps sometimes get stuck in the same spot(s)<ul><li>Check for burrs, strings, or blobs on the outer or inner track guides, and file them off.</li></ul></li><li>Generally hard to turn but smooth<ul><li>Check that the chain links loosely fit onto the step pins. If there&#39;s significant resistance, this will make the steps harder to move. This usually indicates that your bed is leveled too close and the first layer is squishing out too much. You can increase your z offset or add some elephant foot compensation to resolve.</li><li>The steps should be able to freely move left and right by about 1mm or so. If they appear to ride tightly against both sides, consider printing the chain links at a lower Z scale (e.g. 90% or 80%) to make a bit more room.</li><li>A small amount of grease can free things up if still not totally smooth. Add a bit to the inner track guide groove to lubricate the lower pins, and add a bit to the inner surface of the handrail guide to lubricate the upper pins and chain links.</li></ul></li><li>Squeaky<ul><li>Grease should help with this - see above</li></ul></li><li>Sprockets not driving chain or slipping<ul><li>Make sure the spindle is fully inserted into the non-drive-side sprocket and that the bolt is fully tightened.</li></ul></li></ul>

Functional Escalator Model - Redux

自动电梯

niltsh

Updated @ Jan, 22nd, 2024&nbsp;I've noticed some feedback that my default profile does not perform well on A1 series, mainly because of the overhang of the barrel and main body.As I don't have a A1/A1 mini printer to verify, please be cautious if you would like to challenge on A1/A1 mini. And I would appreciate if anyone could share his/her A1 profile if succeeded.&nbsp;-----------------Story continued from <a target="_blank" href="https://makerworld.com/zh/models/39368#profileId-38480" rel="nofollow noopener">https://makerworld.com/zh/models/39368#profileId-38480</a>&nbsp;Once the kids know what their dad is capable, their dad got mind blown. So this time, I started from scratch and made them happy again.&nbsp;This model works as the thumbnail GIF demonstrated.The total range is around 7~8m, effective range is around 3~4m, should not worry about breaking your window, but I won't recommend to try it.&nbsp;The assembly manual is in the thumbnails, should not be hard for you as you have already own a printer.&nbsp;As I am not a glue fan, this time I adjusted the fitting relatively tight, especially when installing the “hand support”. My suggestion is applying some lubricant and use a small hammer gently.----------------------There are 3 parts need to be prepared separately<ol><li>bow string: the rubber diameter no more than 2 mm should be OK. I bought from <a target="_blank" href="https://www.amazon.co.jp/dp/B00A9MM86S?psc=1&ref=ppx_yo2ov_dt_b_product_details" rel="nofollow noopener">here</a> </li><li>rubber ring: I used the same rubber ring with my katana, the folding diameter is 60mm</li><li>PTFE tube: you could cut from your AMS. I did that.</li></ol>----------------------I am not a aerodynamics expert. Although I tried several approaches, I could not find a better bullet shape rather than ball shape. I really hope anyone would like to help to design a good bullet shape.&nbsp;

Hybrid Crossbow / 弩 - 神机

zuperbuuworks

<h3>VERSION 2 OF SHENRON IS NOT ON MAKERWORLD. THE VERSION FOUND HERE NO LONGER RECEIVES UPDATES.</h3>--What&#39;s Changed in V2?-- Version 2 has been made from scratch, with improved link design, greater detail, and more accurate source material features.--What&#39;s New in V2?-- The arms and legs now have articulation via ball-and-socket joints, and come in two flavours; a 4 joint design or a single joint design, for simplicity. The jaw now opens and closes, and has inner-mouth detailing. There is an optional head with whiskers already meshed onto it, or you can use filament strips on the other head type, which has holes to insert the strips into.--Anything Else?-- Whilst version 1 of Shenron was, and will remain, free to download, the Version 2 model will be a paid-for model. Provided as STL files, with a full-colour 3MF painted in Bambu Studio included.The model will be for sale ONLY and found on the following pages: https://www.printables.com/@zuperbuu_1527797 https://cults3d.com/en/users/zuperbuu/3d-models https://www.patreon.com/thomastedwardsSHENRON V2 WILL NOT BE UPLOADED ANYWHERE ELSE: if you see it on MakerWorld, Thingiverse, or any other page that isn&#39;t one of the above 3 URLs, it will have been STOLEN and should be REPORTED.<h4>IMPORTANT: If you use a P1S/P1P and experience issues printing the top of the head, please configure the print profile speed to 80mm for the outer wall, and give the model 3 walls. (thank you user PavorMaker who helped figure this fix out.) If you use the Textured PEI plate, a brim is necessary regardless of what machine you use. A brim is not needed if you use the Cool Plate in an enclosed machine, that has a stable temperature.</h4>This Shenron model comes in two sizes; short, and long. The short dragon has 12 joints down its body, the long has a whopping 31 joints!The whiskers are just strips of filament that I have glued into the holes on the side of the muzzle, a filament size of 1.75mm fits in the holes nicely.I printed mine without a brim; providing your hotbed is clean/freshly glued, you shouldn&#39;t need a brim either. Supports are not needed for this model; do not use them or the model can break when you remove it from the supports!&nbsp;Be aware that the long version of the model gets VERY close to the plate edges, so you won&#39;t be able to make this model any larger. I wouldn&#39;t print it any smaller as the joints will likely lose strength.&nbsp;Pre-painted/coloured versions are also available!&nbsp;The joints can move in almost all directions, though the hips have the least movement. The arms and legs do not move.You can see the range of movement in this video:This file covers PERSONAL use. If you want to sell prints of this model, please subscribe to my Patreon: https://www.patreon.com/thomastedwards

Articulated Shenron Dragon Toy

龙珠

maxaruta

With this test, you can perfectly understand the tolerance of the thicknesses of your printer, and be sure of the spaces to leave between the walls in order to obtain a sliding insert that fits perfectly. In addition, you can accurately discover what measurements to use to print "Print-in-place" pieces.&nbsp;Italian:Con questo test, puoi capire perfettamente la tolleranza degli spessori della tua stampante e avere la certezza di quali spazi lasciare tra le pareti per ottenere un inserto scorrevole che si adatta perfettamente. Inoltre, puoi scoprire con precisione quali misure utilizzare per stampare i pezzi "Print-in-place".

The Utlimate Tolerance Test

测试

CATIAV5FTW

1/2/2024 UPDATE: I have incorporated several minor design improvements to the parts to improve clearances, ease of printing, and ease of assembly. Parts require fewer supports as well. These updates are included in the Jet Engine Model for Kit-006 print profile. This is the latest and greatest profile, so I highly recommend using this from now on. The parts from the previous release, now renamed (OLD) Jet Engine Model for Kit-006, are still compatible with these new parts, however, so you don’t have to reprint the whole thing if you don’t want to.&nbsp;Overview:A cutaway model of a 2-spool high bypass turbofan. I designed the whole engine from scratch with cues to certain existing engines. For example, I think Rolls-Royce makes the best-looking fans, so there&#39;s some resemblance there... Since originally uploading to Thingiverse in 2016, the popularity of this model has grown far beyond expectations. The model has appeared in numerous publications, additive manufacturing expos/conferences, and is (for better or worse) being made and sold by a number of 3rd parties. However, rest assured that this is one of the official sources for this model. A bunch of remixes of this engine are out there, mostly in Thingiverse at the moment, if you are so inclined. I&#39;ve also designed an <a target="_blank" href="https://makerworld.com/models/158422" rel="nofollow noopener">alternate fan for this engine</a> that more closely resembles GE and P&amp;W engines. Check it out!&nbsp;I uploaded a diagram with labels to all parts for reference. For more detailed instructions, the YouTube assembly guide at the bottom of this description walks you through the process.&nbsp;Please refer to the BOM (Bill of Materials, aka Parts List) below for keeping track of what parts to print.&nbsp;===The required fasteners (screws, washers, and nuts) and ball bearings are listed below. However, to make your life easier, there is an official hardware kit that includes these components: <a target="_blank" href="http://shrsl.com/4cfq0" rel="nofollow noopener">Jet Engine Model Components Kit - 006</a>. <ul><li>Metric machine screw, allen socket cap, 2.5mm x 0.45mm x 10mm (QTY 100)</li><li>Metric flat washer, 2.5mm (QTY 200)</li><li>Metric hex nut, 2.5mm x 0.45mm (QTY 100)</li><li>6204 open ball bearing 20x47x14 (QTY 2)</li><li>6003 open ball bearing 17x35x10 (QTY 2)</li></ul>The jet engine will look great in any filament, but what I recommended (and what is pictured) are the following:<ul><li><a target="_blank" href="http://shrsl.com/4cfqh" rel="nofollow noopener">PLA Basic Jade White</a></li><li><a target="_blank" href="http://shrsl.com/4cfqm" rel="nofollow noopener">PLA Basic Blue-Gray</a></li><li><a target="_blank" href="http://shrsl.com/4cfqs" rel="nofollow noopener">PLA Basic Black</a></li><li><a target="_blank" href="http://shrsl.com/4cfr0" rel="nofollow noopener">PLA Metal Cobalt Blue Metallic</a> --OR-- <a target="_blank" href="http://shrsl.com/4cfrd" rel="nofollow noopener">PLA Metal Iron Gray Metallic</a></li></ul><figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=dNsBbN54J-I"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/dNsBbN54J-I" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;Disclaimer: This model is part of the Creator Program, When you purchase the Jet Engine Model Components Kit - 006 and filament through the links above, creators may earn an affiliate commission as a reward of their work. (The creator program is currently in the trial phase. The application is not yet open to the public.) ===&nbsp;Good luck and happy printing! Message me with any questions!

3D Printable Jet Engine

模型

Gatto

Spy x Family - Anya Forger Chibi Figure&nbsp;From the popular manga and anime series, Spy x Family, comes this adorable chibi figure of the main character (?!), Anya Forger! Our little telepathic spy (or wannabe) is 7 cm tall but can be resized to your liking. No print supports are needed with these dimensions, but if you modify them, they may be necessary! <a target="_blank" href="https://makerworld.com/en/@Gatto" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000445411/design/2024-04-15_4fefedc8921d9.gif"></a><figure class="image"><a href="https://makerworld.com/en/@Gatto" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000445411/design/2024-06-23_dbf03a232872e.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/@Gatto" rel="nofollow noopener">Check out my profile for other models and follow MEOW!</a>

Anya Forger Chibi Figure - アーニャ・フォージャー

间谍过家家

3DMN

Get ready for an Easter celebration that's out of this galaxy with our R2-D2-themed Easter egg! This adorable droid-inspired egg is crafted from recycled materials sourced from none other than R2-D2 himself.&nbsp;R2-D2 is the perfect surprise waiting inside your Easter egg&nbsp;If you appreciate my work, give it a like, and if you love it, consider buying me a coffee to show your support! <a target="_blank" href="https://www.paypal.com/donate?hosted_button_id=BC7SWTMZG92TG" rel="nofollow noopener">https://www.paypal.com/donate?hosted_button_id=BC7SWTMZG92TG</a>

Star Wars R2-D2 Easter Egg

RoB.G

<ul><li>Puzzle box Small 52x52x30</li><li>Puzzle box Large 70x70x40 </li></ul>

Puzzle Box 

解密

Chrobakx

I want to thank you all for the boost coupons you sent me. I really appreciate them.&nbsp;This highly detailed 3D printed cobra captivates with its segmented body that can twist, coil, and strike hypnotic poses. Each articulated section mirrors the scaly texture of the real venomous snake, bringing lifelike movement to this desktop curiosity.&nbsp;Only uses little bit of support underneath the head.Joints are very sturdy. You can scale up or down to your liking.

Articulated cobra snake

动物

Magmar

Fixed model for better printing.180mm infill - lightning&nbsp;

Hedwig from Harry Potter

哈利波特

This is the stand I created for ironman mark85 bust from this link:<a target="_blank" href="https://www.cgtrader.com/free-3d-print-models/art/sculptures/free-iron-man-mark-85-bust" rel="nofollow noopener">https://www.cgtrader.com/free-3d-print-models/art/sculptures/free-iron-man-mark-85-bust</a>&nbsp;for my a1 mini, the scale is down to 30% from the original ironman file.&nbsp;Wires were tricky for me, a beginner for 3d printing.&nbsp;Consider skipping the thin wires, and only do the thicker tube.&nbsp;*added the assembled version raw model data for reference*Mar11 2023: updated the file. simpler/cleaner/a bit thicker wires. overall scale 40% to the ironman bust file&nbsp;enjoy!&nbsp;h&nbsp;

base/stand for Ironman mark85 bust(stand only)

钢铁侠

叫老龚就好

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000246355/design/2024-03-12_35184c63ff113.jpeg"></figure><figure class="table" style="width: 73.37%"><table class="ck-table-resized"><colgroup><col><col><col></colgroup><tbody><tr><td>type</td><td>specifications</td><td>num</td></tr><tr><td rowspan="2">rebar（钢条）</td><td>diameter（直径）：6mmlong：（长）：300mm</td><td>1</td></tr><tr><td>diameter（直径）：3mmlong：（长）：615mm</td><td>2</td></tr><tr><td rowspan="2">Cup head screw（杯头螺丝）</td><td>M5*10  </td><td>2</td></tr><tr><td>M5*20</td><td>2</td></tr><tr><td>nut（螺母）</td><td>M5</td><td>4</td></tr></tbody></table></figure>&nbsp;&nbsp;&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000246355/design/2024-06-10_54db1be50d4bf.png"></figure>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000246355/design/2024-06-10_0a584fd7476d48.png"></figure>&nbsp;

神机-凤凰鸣-plus版 Divine Machine Phoenix Blade-plus

Jopek Design

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/381124/2024-01-09_yztq9u8cw9ql.png"></figure><h4>Dimensions (LxWxH)</h4>110 x 64,32 x 20,18 mm (100% scale)<h4>Basic information</h4>Trilobites have been extinct for quite a while now, so you most likely won't get the chance to hold one in your hand any time soon. Until someone brings them back to life, here's a good alternative!<h4>Files information</h4>I've included 1 file in the .stl format.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/381124/2024-01-09_zj8hmawflnb0.png"></figure><h4>Material</h4>PLA<h4>Layer height</h4>0,2 mm<h4>Infill</h4>>15%<h4>Support</h4>The model was designed not to require any support material.<h4>Scaling</h4>A well tuned setup should be able to print the model reliably at up to 50% scale, I wouldn't recommend going below that. If you're printing a downscaled version, you need to make sure, that the first layer adhesion is sufficient, as the contact area isn't exactly big, and it might cause issues.<h4>Orientation</h4>Default, laid flat on the belly<h4>Adhesion aid</h4>If your printer suffers from poor buildplate adhesion, consider using some kind of adhesion booster, such as adhesive spray or glue. The contact area is fairly small, and the print might detach otherwise.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/381124/2024-01-09_1vlcwoutsbqk.png"></figure>In this section, you can find a list of all updates and fixes, which were introduced to the model along the way. Each update will be explained thoroughly, so that you know, which issue was every specific update adressing. If you're having any problems with the model, you can check here, if a new, revised version of the model, has already been released in a response to your problem, or not.If you run into any issues with the model, please visit the section of known issues, which can be found just below Updates and fixes. If you won't find your specific problem there, don't hesitate to contact me via dm.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/381124/2024-01-09_7qvyiugvs1b6.png"></figure>There currently aren't any known issues/work in progress. If you run into any, please contact me via dm.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/381124/2024-01-09_4fjxyiwkmug8.png"></figure>My work is free for personal, non commercial use. If you want to sell, or monetize my models in other way, please contact me via dm, and we will discuss details, terms and conditions, and your individual pricing plan.

Articulated Trilobite

古代虫

Creatività in 3D

<h2>THE BIG REAL HAND</h2> Large Hand created with Revo 3D scanner. The model has a large hand but can be scaled at will. To make the hand more realistic I recommend printing it with this PLA <a target="_blank" href="https://amzn.eu/d/6iMbu7o" rel="nofollow noopener">https://amzn.eu/d/6iMbu7o</a> or a skin-colored PLA.The result is fantastic as you can see from this photo&nbsp;<figure class="image image_resized" style="width:24.37%;"><img src="https://makerworld.bblmw.com/makerworld/draft/858344/2024-03-12_cb57ef6b16293.jpg"></figure>Update:User RodT created a wall mount for the hand. You can find it in the press profiles.Personally tested, it fits perfectly in the hand to hang on the wall. (Unscaled hand)<figure class="image image_resized" style="width:22.08%;"><img src="https://makerworld.bblmw.com/makerworld/draft/858344/2024-04-14_4294a6656e61.webp"></figure><figure class="image image_resized" style="width:21.33%;"><img src="https://makerworld.bblmw.com/makerworld/draft/858344/2024-04-14_3662ae8e7bc1b.webp"></figure><figure class="image image_resized" style="width:20.63%;"><img src="https://makerworld.bblmw.com/makerworld/draft/858344/2024-04-15_67b8474c8b6a5.jpg"></figure>&nbsp;ENJOY

Real Big Hand

3DPmom

<figure class="media"></figure><img class="image_resized" style="width: 30.59%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000149136/design/b50369d8-d175-46ad-80d6-b86a1393e919">These are fun rockets with boosters that extend on take-off. I designed two sizes and each contain two parts: the main rocket body and the boosters. The larger rocket has four small boosters and the smaller rocket has one large booster.  These make great little gifts or party favors 🚀&nbsp;<img class="image_resized" style="width: 30.5%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000149136/design/41d3f34e-0eac-43be-ba01-6c384316d3ca">Layer Height 0.2mmPLA works great15-20% InfillSupports needed for the area around the boosters on the Large Rocket&nbsp;Dimensions of Large Rocket: 4in x 2 3/8inDimensions of Small Rocket: 3 1/4in x 1 7/8in&nbsp;There are two ways you can print these rockets (I included both in their print profiles):<ol><li>Print the complete rocket: this prints great but if you want multi-color for the boosters (and/or fins) it’s going to take some time (I found 8-10hrs)</li><li>Print the boosters first, print the rocket second pausing at layer height 15.6mm for the large rocket and 30.6mm for the small rocket, drop the boosters in and then continue printing. This method is much faster:)</li></ol>&nbsp;In the print profile for the small rocket I included the complete rocket to print on plate #1. On plates #2 &amp; #3 I separated the rocket from the boosters, so they can be printed separately (make sure to print the boosters first:)&nbsp;In the print profile for the larger rocket I included the complete rocket to print on plate #1. On plates #2 &amp; #3 I separated the rocket from the 4 sets of small boosters so they can be printed separately (again make sure to print the boosters first:)&nbsp;Note: supports are needed for the larger rocket at the base around the rings for the boosters. I have included those supports in my print profile. (Also note if you are printing plate #3, I did not include supports in the booster chambers so that they are clear to drop the boosters in:)&nbsp;<img class="image_resized" style="width: 30.6%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000149136/design/5e3a3622-4ff3-47e6-adc2-303a5155681a">My designs are free for personal and non-commercial use. If you would like to sell them for commercial use, send me a message and we can discuss the details:)&nbsp;<img class="image_resized" style="width: 30.54%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000149136/design/e757d34e-1fcd-4b04-b6fe-8c0d913c3a49">If you like my work and want to help support it, you can buy me a Diet Coke at <a target="_blank" href="https://www.buymeacoffee.com/3dpmom" rel="nofollow noopener">https://www.buymeacoffee.com/3dpmom</a> Thanks so much!&nbsp;Have fun printing these…they’re a blast 🚀

Rocket with Boosters (2 Sizes)

火箭

Bean Eating Cookies

A sanrio cookie cutter and stamp set (requested by a fan) They are Cutters and stamps separate. Have a look at my profile for more cookie cutters and stamps! If you have a request don't hesitate to reach out! If you like what I am doing please consider buying me a coffee or tipping.<img src="https://cdn.buymeacoffee.com/buttons/bmc-new-btn-logo.svg?image_process=resize,w_800/format,webp?image_process=resize,w_800/format,webp"><a target="_blank" href="https://www.buymeacoffee.com/beaneatingcookies" rel="nofollow noopener">Buy me a coffee</a>

Sanrio Cookie Cutters and Stamps

洁洁

FlamingoTK

毛笔字：春池嫣韵。。。。。。。。。本来环在左上角，感觉不好用，已经改为旁边放大缩小看自己，旁边的小字别介意，胡乱画的

Mini Chinese word Keychains/ 春池嫣韵书法钥匙扣多色打印

文明

Kocyns

<h3>UPDATE:</h3><ul><li>If you want permission for commercial use: <a target="_blank" href="https://www.patreon.com/kocy/" rel="nofollow noopener">patreon.com/Kocy</a></li><li>New model: <a target="_blank" href="https://makerworld.com/en/models/376939#profileId-276893" rel="nofollow noopener">DeLorean DMC-12</a></li></ul><figure class="image image_resized" style="width: 58.79%"><a href="https://makerworld.com/en/models/376939#profileId-281288" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218462/design/2024-03-27_a41aa99062719.png"></a></figure>&nbsp;<ul><li>Added multi color version for AMS: AMS - 4 colors - FRAME or (AMS - 4 colors - NO FRAME)</li></ul><figure class="image image_resized" style="width: 60.36%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218462/design/2024-03-08_171076b91749a.jpg"></figure><h3>ASSEMBLY:</h3>The assembly itself is more demanding, so please be patient during the process. Thank you!&nbsp;Quick assembly tip: Start from the front of the vehicle along with both side parts, then move over the hood to the roof. Then begin assembling the internal parts followed by the trunk. Mount the pre-assembled chassis with wheels last. Bumpers and spoiler go on at the very end.&nbsp;<h4>Video:</h4><figure class="media"></figure><figure class="image image_resized" style="width: 80.08%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218462/design/2024-03-02_6a7929db2a272.png"></figure><figure class="image image_resized" style="width: 63.59%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218462/design/2024-03-02_eada19129df21.png"></figure><h4>1) Sides and front</h4><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218462/design/2024-03-05_b8c462015b82b.png"></figure><h4>2) Hood and roof</h4><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218462/design/2024-03-05_2b1f6be2a6a21.png"></figure><h4>3) Interior parts 1/3</h4><figure class="image image_resized" style="width: 57.21%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218462/design/2024-03-05_91d61eb454038.png"></figure><h4>4) Interior parts 2/3</h4><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218462/design/2024-03-05_bf666331b1267.png"></figure><h4>5) Interior parts 3/3</h4><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218462/design/2024-03-05_a8c15ef4c451d.png"></figure><h4>6) Chassis and wheels</h4><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218462/design/2024-03-05_9b011d38aa839.png"></figure><h4>7) Assembly</h4><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218462/design/2024-03-05_772225c948dfc.png"></figure><h4>8) Bumpers</h4><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218462/design/2024-03-05_70518fc3c497b.png"></figure>&nbsp;<h4> </h4><h4>Wheel (version R1 only):</h4><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218462/design/2024-03-03_35304525e8cc.png"></figure><figure class="image image_resized" style="width: 61%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218462/design/2024-03-03_9e476fad10ef9.webp"></figure>&nbsp;…More Information will be added!

Golf MK1 - Kit Card

VRsculpts

The baby version of Garfield from the upcoming moving. This is from the part in the trailer where Jon meets Garfield for the first time and asks him “you hungry little guy?”&nbsp;Prints in place with no supports. Profile is set up to purge to infill with prime tower disabled, with a flushing volume multiplier of .6, I have found this to provide good print quality with least amount of waste. Printed on my A1 mini at .2 mm layer height which keeps the print time down. If you have more than 1 AMS you may want to print his snout yellow or a lighter shade of orange (fill bucket with edge detect turned off).&nbsp;Join my Patreon if you would like to sell physical copies of my designs, your support is appreciated and motivates me to create more cool stuff to share! https://www.patreon.com/VRsculpts

Baby Garfield (The Garfield Movie 2024)

猫猫

GamerForge

I made a Remix of my Bokoblin BIG SIZE Chest. it has a lot of space !!look at my other Chest <a href="https://www.printables.com/de/model/402890-botw-bokoblin-chest-big-size-for-switch-games-and-" rel="nofollow">https://www.printables.com/de/model/402890-botw-bokoblin-chest-big-size-for-switch-games-and-</a> - Infill 15%- Support yes

Zelda BOTW/TOTK Bokoblin Chest  - empty chest! (Zelda Breath of the Wild)

switch

Aoaobear

Sanxingdui (Chinese: 三星堆) stands as a significant archaeological site and a major representation of Bronze Age culture in modern Guanghan, Sichuan, China. Its discovery was largely made in 1986, following initial findings in 1927. Through excavations, archaeologists uncovered artifacts dating back to the twelfth–eleventh centuries BC, as determined by radiocarbon dating. This archaeological site serves as the type site for the Sanxingdui culture, attributed to the ancient kingdom of Shu. The artifacts excavated from Sanxingdui are now showcased in the Sanxingdui Museum near the city of Guanghan.&nbsp;Sanxingdui is included on the UNESCO list of tentative World Heritage Sites, alongside the Jinsha site and the tombs of boat-shaped coffins. The discovery of Sanxingdui challenges the conventional narrative suggesting that Chinese civilization originated solely from the central plains of the Yellow River. Some even speculate that the culture represented by the Sanxingdui ruins has extraterrestrial origins.&nbsp;In March 2021, over 500 artifacts were unearthed at the Sanxingdui site, located 4.6 square miles outside the provincial capital of Chengdu. Among these artifacts was a gold mask with a history spanning 3000 years. During excavation, archaeologists carefully removed a fragment of a bronze sacrificial vessel from Pit No. 3, revealing a severely deformed gold object. Initially resembling a crumpled piece of paper, the gold artifact's shape was difficult to discern. Restoration experts spent two weeks meticulously repairing the mask.&nbsp;Measuring 37.2 centimeters in width, 16.5 centimeters in height, and weighing approximately 100 grams, this gold mask features hollowed-out eye sockets, rounded ear contours, a prominent nose bridge, and a slightly open mouth. Its majestic and sacred appearance makes it the most intact gold mask unearthed during the Sanxingdui archaeological excavations to date.&nbsp;The unearthed objects exhibit unique shapes and superior techniques, confirming the extraordinary creativity of the ancient Shu people and their desire to connect with the heavens and understand the universe.<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=TJknwAL8Dsw"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/TJknwAL8Dsw" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;<ul><li>There is more than one gold mask unearthed in Sanxingdui. They are all for reference when making models; <img src="https://makerworld.bblmw.com/makerworld/draft/673058/2024-03-07_3a8d84ded8f74.jpg"></li><li>The model is much smaller than the real thing. Real mask size: approximately 40cm wide x 28cm high;</li><li>In order to facilitate printing, low poly style is used;</li><li>Requires support (not complicated and easily removed);</li><li>In addition to the gold filament, the bronze color is also very good. Sanxingdui Bronze Mask:<img src="https://makerworld.bblmw.com/makerworld/draft/673058/2024-03-07_b8b01281ca1e.jpeg"></li></ul>We sincerely invite you to learn about China’s archaeological history and culture!&nbsp;<figure class="image image_resized" style="width:39.89%;"><a href="https://makerworld.com/en/models/242397" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/673058/2024-03-10_77e86713eb7fa.jpg"></a><figcaption>For other ancient Chinese cultural relics, click on the picture</figcaption></figure>

Sanxingdui gold mask  三星堆黄金面具

黄金面具

杰瑞爸爸的工作室

刺客伍六七神锻国国宝魔刀千刃伸缩剑

刺客伍六七魔刀千刃伸缩剑3.0

moose_

A Triple Tomoe Sharingan for the extruder motor visualizer window on the A1 Mini.

Sharingan for A1 Mini Window

火影

pinionPlus

Alphonse's head from FMA! File comes in one piece so it will need to be scaled down/ broken into parts. Happy Printing!

Alphonse Elric Helmet 

钢炼

Filionix3D

I have created a 3D print of the sculpture of the Parthenon to capture its grandeur and beauty. This ancient temple represents an icon of classical Greece, with its imposing columns. Every time I look at this 3D print, I feel transported back in time, becoming a part of that world of splendor and wonder that continues to inspire through the centuries.&nbsp;

Parthenon in 3D Grandeur of Ancient Greece

建筑

planes01

<h3>Model</h3><h3>Overview</h3>SR-71 kit card that was created to showcase a true aviation engineering marvel and is an inspiration for kids and adults of all ages in pursuit of science, technology, engineering, and math (STEM). This particular model uses color and sliced 3D format to really bring a highly contoured airplane to life upon assembly. The kit format is great for gifting the model to engineering clubs, friends, family, or coworkers that enjoy building and showcasing aviation engineering history. The kit includes a stand that is assembled to display the model.&nbsp;Check out the <a target="_blank" href="https://makerworld.com/en/models/199176" rel="nofollow noopener">SR-71</a>, <a target="_blank" href="https://makerworld.com/en/models/242106" rel="nofollow noopener">B-52</a>, <a target="_blank" href="https://makerworld.com/en/models/436445" rel="nofollow noopener">A-10</a>, <a target="_blank" href="https://makerworld.com/en/models/402126" rel="nofollow noopener">787</a>, and <a target="_blank" href="https://makerworld.com/en/models/405459" rel="nofollow noopener">Darkstar</a>!Check out the full airplane kit card collection → <a target="_blank" href="https://makerworld.com/@planes01/collections/991821" rel="nofollow noopener">linked here</a>!<h3>Profiles</h3><ul><li>Small Kit with Frame<ul><li>small plane kit with frame ideal for gifting to others</li></ul></li><li>Large Kit with Frame<ul><li>large plane kit with frame ideal for gifting to others</li></ul></li><li>Small Model Pieces<ul><li>small plane without frame ideal for assembly right off the printer</li></ul></li><li>Large Model Pieces<ul><li>large plane without frame ideal for assembly right off the printer</li></ul></li></ul><h3>Filament</h3>As shown:<ul><li>Bambu Lab PLA Black</li><li>Overture PLA Cement Gray</li><li>Overture PLA Space Gray</li><li>Esun PLA+ Fire Engine Red</li></ul><h3>Tips</h3><ul><li>Model requires close tolerances to ensure snug but not tight or loose fit<ul><li>Make sure the model cools to room temperature before assembly</li><li>Ensure filament is properly calibrated with no excessive over extrusion</li></ul></li><li>Ensure good bed adhesion<ul><li>Make sure printer is fully calibrated</li><li>Make sure print bed is clean &amp; dry (soapy water is my favorite for cleaning - simple &amp; works)</li><li>Make sure filament is dry (wet filament can generate non-continuous flow that can cause bed adhesion issues)</li><li>Cooling &amp; Temps - make sure they are correct for your printer, build plate, and filament</li></ul></li></ul><h3>Assembly</h3><ul><li>Remove all pieces from the kit</li><li>Debur as needed to smooth edges</li><li>Insert connector between engine halves<ul><li><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000199176/design/2024-02-24_81f8b94fa9812.jpg"></li></ul></li><li>Press engine halves together<ul><li><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000199176/design/2024-02-24_499c3e2a6c543.jpg"></li></ul></li><li>Insert engine into fuselage (snaps together). Note LHS &amp; RHS engine positions below!<ul><li><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000199176/design/2024-02-24_5e37007ed5a03.gif"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000199176/design/2024-02-24_2572f2daa805a.jpg"></li></ul></li><li>Insert outboard wing into engine (snaps together)<ul><li><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000199176/design/2024-02-24_582fe33443f7.jpg"></li></ul></li><li>Insert vertical tail into engine (snaps together; recommend to insert aft end of vertical tail first and then press down on forward end)<ul><li><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000199176/design/2024-02-24_02853c5841433.jpg"></li></ul></li><li>Place airplane onto stand<ul><li><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000199176/design/2024-02-25_3244aa356b7fb.jpg"></li></ul></li><li>Enjoy!</li></ul>&nbsp;<h3> FAQ</h3><ul><li>How do you make the airplane kit card models?<ul><li>Fusion 360! All of my models are created by me in a CAD environment. I love to design &amp; print my creations!</li><li>Here is a view of this SR-71 model showing sketches &amp; bodies!</li><li><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000199176/design/2024-03-05_8bcb3d1b0e6e1.png"></li></ul></li><li>How can I learn how to make kit card?<ul><li>Learn the tools &amp; keep exploring! (YouTube is a great starting place)</li><li>The basic steps:<ul><li>Create sketch for each of the major components: wing, fuselage, vertical tail, joints, etc..</li><li>Create solid bodies using those sketches (extrusions, lofts, etc…)</li><li>Add any details like blends, fillets, chamfers</li><li>Create the stand over the center-of-gravity (note the maker point on the image above!)</li><li>Fine tune tolerances in the joint (here is where a lot of 3D printing prototyping comes into play!)<ul><li>Fun Fact: This SR-71 had 6 prototypes before publishing to the community</li></ul></li><li>Add kit frame</li></ul></li></ul></li></ul>

SR71 Kit Card

模型版

N33 Designs

&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000441815/design/2024-04-24_1e0491c387a39.png"></figure>Turn your purge waste into MakerWorld coins with this coin press!&nbsp;Print in 100% infill PETG (or other more heat resistant material), heat up 4 - 6g of PLA purge and press it into a coin shape.Note: When assembling the 3 parts, ensure the diamond in the centre of the coin is facing the same way and/or the printed seams are aligned - it won&#39;t fit together in a different orientation.&nbsp;Inspired by <a target="_blank" href="https://makerworld.com/en/@lcxg" rel="nofollow noopener">lcqg&#39;s </a>spinning top mould. They have a great write up on the process so definitely check that out:<a target="_blank" href="https://makerworld.com/en/models/437241#profileId-342435" rel="nofollow noopener">https://makerworld.com/en/models/437241#profileId-342435</a>&nbsp;Also check out my other purge related model to help you sort and store your purge waste by colour so it&#39;s ready to be transformed into models like this in the future! <a target="_blank" href="https://makerworld.com/en/models/416748#profileId-319038" rel="nofollow noopener">https://makerworld.com/en/models/416748#profileId-319038</a>&nbsp;<figure class="image image_resized" style="width:37.72%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000441815/design/2024-04-06_da14d87b96305.png"></figure>&nbsp;

Maker World coin mould

配件

Makerspace.Online

A 3D printable Businesscard embosser, can be assembled without any hardware, everything just snaps together. I designed this businesscard embosser to be modular and 3D printable without using any support and without any hardware required to assemble. The tollerances are tight. And some materials work better then others. I have had best results using Basic PLA. Available patterns:3 Rollers available, more patterns can be found on <a target="_blank" href="https://makerworld.com/en/u/2755972568" rel="nofollow noopener">my makerworld page!</a> - Confetti - ZigZag - Polkadot Follow me on <a target="_blank" href="https://www.instagram.com/makerspace.online/" rel="nofollow noopener">my instagram</a> for updates on new patterns and uploads! Assembly:  (Pro tip: use some lubrication grease / vaseline around the gears for a better working!!) <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000148536/design/2024-01-20_cca5dc6403a79.png"> Make sure to allight the bottom gears maked with the dot and allign with the stipe.  Do not forget to add some lubrication / grease between and underneath the gears! <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000148536/design/2024-01-20_d2c9531e7e588.png"> For the top gears some marks are present as well to allign the gears properly! Also here! Do not forget to add some lubrication / grease between and underneath the gears!<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000148536/design/2024-01-20_2b0339c954b2b.png"> Note:  This design is licensed under a <a target="_blank" href="https://creativecommons.org/licenses/by-nc-sa/4.0/" rel="nofollow noopener">Creative Commons Attribution-Noncommercial-Share Alike</a> Please do not sell this file or printed product. <a target="_blank" href="https://www.instagram.com/makerspace.online/" rel="nofollow noopener">Instagram:</a> <a target="_blank" href="https://www.instagram.com/makerspace.online/" rel="nofollow noopener"><img class="image_resized" style="width: 8.56%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000148536/design/a1ec037c-99fb-4f6f-9216-f4866257bed3.png" alt="Instagram, logo, social, social media icon - Free download"></a>

Business Card Embosser - Level up your cards! 

印花桶

无明业火_BLAZERS

This is a cartoon-style toy shooter, without firing capability and cannot be modified, making it safe to play. It features intricate design that allows for functions such as blowback shell ejecting action, locking the slide back on an empty magazine, trigger-hammer interaction, and a safety mechanism.这是一款卡通版的手枪玩具，没有发射功能，也无法改装，可以安全玩耍。通过精巧的设计实现反吹抛壳、空仓挂机、击锤联动、保险的功能。Filament：PLA Basic is recommended especially in moving parts耗材：推荐使用PLA Basic耗材，尤其是运动部件Hardware Kit： 1.pivot pin D2xL14 1 D2xL18 9 D2xL25 1 2.compression spring： 0.3x3xL10 2 0.3x6xL80 1 0.5x5xL25 1 0.7x12xL70 1 3.torsion spring: 0.4x4(120°，cylindernumber 6） 1 1x5(120°，cylindernumber 3） 1 4.screw M5x12(thin cap) 3you can also buy the hardware kits from： https://item.taobao.com/item.htm?spm=a213gs.success.0.0.72334831uVSCTY&id=746688606932Video Tutorial： 1.You Tube:<figure class="media"><div data-oembed-url="https://youtu.be/uZ-ClomC5pU"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/uZ-ClomC5pU" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure> 2.Bilibili: https://b23.tv/TfENGK3Thanks and enjoy it !

哥斯拉

美国

赠品

家具