Pureshem

trynottobreakanything

This is the Gear Rhombo Junior (Jr.) (the Spirit of Mini Gear Sphere). This is totally redesigned from the Gear Sphere by TNTBA. This Gear fidget toy is a lot of fun and is now portable.Approximate size of this design is: 50mmx50mmx50mm.&nbsp;This is the Free version of the <a target="_blank" href="https://thangs.com/designer/trynottobreakanything/3d-model/Gear%20Rhombo%20JR%20by%20TNTBA-1087166" rel="nofollow noopener">Gear Rhombo JR which I&#39;ve licensed for those who wish to sell and print.</a> &nbsp;The time to print and fully assemble is approximately 1 hour and 15-30 minutes.&nbsp;Gears and core may be printed in any material. Clips were designed to be printed in PETG. Tool can be printed in PLA.&nbsp;Place the clip into the tool and use the tool to place the clips directly into the holes on the core. Make sure you go directly into the hole to avoid splitting, breaking, or over-bending the clips. I would recommend that you print out additional clips to ensure you have extras when you mess up.&nbsp;Once the clips are installed, you can place the gears following the numbering located on each gear and core side.&nbsp;The mechanism to move this toy fidget was inspired by <a target="_blank" href="https://thangs.com/designer/RuvenBals/3d-model/Gear%20Ball-1069853" rel="nofollow noopener">RuvenBals&#39; Gear Ball </a>and <a target="_blank" href="https://www.thingiverse.com/thing:10483" rel="nofollow noopener">Emmett&#39;s Gear Cube</a>.&nbsp;Enjoy!

Gear Rhombo JR by TNTBA (Free Version)

Fidget

Christian

SugarPaws3D

Meet Cosmo! When not napping in sunspots, Cosmo can be found chasing shadows or plotting grand escapes from cardboard box fortresses. This fearless feline adores belly rubs and has an uncanny ability to steal socks, earning the title of &#34;Sock Bandit&#34; among household members.&nbsp;Features: a sit, stand or lie down position, articulated tail, a movable head ✿&nbsp;Be sure to check out my other flexi models, happy printing ≽^•⩊•^≼&nbsp;Tip: If you have adhesion issues and have already tried cleaning your plate with warm water &amp; soap, I suggest doing an initial layer height increase! Brims are my last resort due to the slight damage it can leave when removed.&nbsp;Tip 2: When printing multicolored objects (AMS) it&#39;s best to fill the plate with multiple models to get more out of your time &amp; filament! I would recommend to add a total of 6 cats per plate.

Flexi Cat - Print in Place Articulated

Carla/Animals

Taikounou

This is a Frankie, a MixnMatch Buddy that that you need two files for: you will need to print a body file (keychain hole/without, multicolor/single) and a wing file (AMS multicolor/3color layer change/single). Once everything is printed, just clip the wings in!&nbsp;When Red and blue originally came out my dad played red, and named his starter Frankie.&nbsp;Anything designed by me with the MixnMatch label in the title, will all be able to be used interchangeably if it is the correct body part- all wings will work with the wing slots.&nbsp;That's right-you want a luna moth body with these dragon wings? Print these wings and that body instead! Prefer the fire moth wings, but the Charizard (inspired) body more? print that body and those wings!&nbsp;No supports are needed for printing:Body2-3 walls10%gyroid infill&nbsp;Wings2-3 walls15-20% gyroid infill - I recommend a higher infill on these just so that they are a little more sturdy ( they have a thickness around 3.0 -3.6 mm)&nbsp;There will be other MixnMatch Buddies uploaded…to mix and match!OG Dragon (This one, OG just stands for original, as it was the first dragon designed in the set, I am not name creative)Faerie DragonFrankie the Charizard/Fire dragon&nbsp;Others completed but needing uploading:Fire mothLuna mothMoonlight moth&nbsp;&nbsp;&nbsp;This is a Private Use file only. If you would like to sell them, please purchase the commercial license file over at cults <a target="_blank" href="https://cults3d.com/en/3d-model/game/mixnmatch-frankie-the-fire-dragon-commercial-use" rel="nofollow noopener">HERE</a>.&nbsp;Notes: The wings should not be constantly switched out - there is a chance for wear on the open wing link with weaker materials like matte. The idea I was going for booth wise was that a child could pick and choose there favorite parts to have their own unique buddy that is unique and special that they “helped” create. If the wings need to be removed, hold the wing as close to the open link as possible and turn the wing so the opening is at the back when you pull.&nbsp;Happy printing!

MixnMatch Frankie the Charizard

Carla/Pokemon

elmantec

That is not my design. Here's the original model: <a target="_blank" href="https://makerworld.com/en/models/162964#profileId-178901" rel="nofollow noopener">https://makerworld.com/en/models/162964#profileId-178901</a> . The designer was so kind to allow me to post a remix of the model. Go check his profile, has other cool stuffs: <a target="_blank" href="https://makerworld.com/en/u/494962588" rel="nofollow noopener">https://makerworld.com/en/u/494962588</a> .This remix of the dragon, I made it in more manageable size. More like a toy. Also increased it's overall dimensions, about 120%. There are two print profiles. One and two dragons per plate.

Love Dragon (shorter, but thicker version)

Carla/Dragons

tlavedas

I used HueForge Lithophane Blending Mode and an AI created image to make this “stained glass&#34; Hummingbird print in TWO parts. The first part has just the blues and black of the Hummingbird foreground. The second part blanks out the foreground and blue parts of the hummingbird and provides the reds and yellows for the background. Both parts have very thin base layers, so special care is needed to remove them from the build plate. It is probably best to cool them completely before trying.&nbsp;When joining the two parts be sparing with the adhesive, especially in the lighter parts. The adhesive will change the colors if it is not behind the darkest parts. If spread very thin and uniformly, it should not show too much.&nbsp;Part 1:Project: Hummingbird_Stained_Glass_Part_1.hfp Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mmThe Model is 150x150mm in size You may print at higher layer heights below the Min Depth of 0.16mm The Max Depth is 1.6mm and the Actual Depth is 1.6mmFilaments Used: PLA PolyLite Natural Transmission Distance: 21 PLA PolyLite Aqua Blue Transmission Distance: 3.5 PLA Overture Blue Transmission Distance: 4.2 PLA PolyLite Black Transmission Distance: 0.3 This print uses 4 unique filamentsSwap Instructions: Start with Natural At layer #2 (0.2mm) swap to Aqua Blue At layer #9 (0.48mm) swap to Blue At layer #24 (1.08mm) swap to Black for the rest.&nbsp;Part 2:Project: Hummingbird_Stained_Glass_Part_2_4_color.hfp Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mmThe Model is 150x150mm in size You may print at higher layer heights below the Min Depth of 0.16mm The Max Depth is 1.7mm and the Actual Depth is 1.7mmFilaments Used: PLA PolyLite Natural Transmission Distance: 21 PLA PolyLite Lemon Yellow Transmission Distance: 6 PLA Overture Red Transmission Distance: 4.8 PLA PolyTerra Army Red Transmission Distance: 0.3 This print uses 4 unique filamentsSwap Instructions: Start with Natural At layer #2 (0.2mm) swap to Lemon Yellow At layer #14 (0.68mm) swap to Red At layer #33 (1.44mm) swap to Army Red for the rest. If substituting filaments, pick ones with the closest TD values. Use a Natural white, if possible. Otherwise, pick the one with a TD &gt; 10 to minimize the color change it will cause. The second red, PolyTerra Army Red, was chosen to accent the red throat on the bird. It has a very low TD value. If substituted, use one with a TD less that 2, if possible.&nbsp;There is a small loop on the top of Part 1 to help with hanging the model. Use a thin thread or fine wire.

HueForge Stained Glass Hummingbird

Hueforge

MAK3D4U

Are you looking for a unique and thoughtful gift? Or perhaps you want to add a personal touch to your everyday essentials? Look no further! The Bambulicious name tag is the perfect solution. You can change the name, font, colors and some visuals. Buy some keychain rings (i&#39;ve got mine from AliExpress) and you&#39;re good to go.&nbsp;How did I make the one in the picture?<ul><li>Download OpenSCAD</li><li>Download the font <a target="_blank" href="https://fonts.google.com/specimen/Lobster+Two" rel="nofollow noopener">Lobster Two</a> and install it for all users (on windows)</li><li>Open OpenSCAD (restart after install a new font, so it&#39;s loaded)</li><li>Copy/paste the code from the customizer</li><li>Change the name, the font, other parameters. (Color is not relevant in OpenSCAD)</li><li>Render the model &gt; export the model as .3mf or .stl</li><li>Open the model in BambuStudio (or Orcaslicer)</li><li>Select the model, right click &gt; Split &gt; To parts</li><li>Select the name parts and give it the color filament you want.</li><li>Select the outline part and give it the color filament you want.</li><li>Change the quality settings to what you like. (mines are: 0,2 mm / 2 walls / ironing all top surfaces / 10% infill gyriod)</li><li>Connect the keychain rings and you&#39;re ready! Share this model and spread the fun! Checkout my other models: <a target="_blank" href="https://makerworld.com/en/models/488704" rel="nofollow noopener">The Scrabble Coaster</a></li></ul>

Bambulicious Name tag

openSCAD

TBone_427120

&nbsp;Note: Maker World has a limit for how long it allows for slicing of Print Profiles before it gives up on verification. The Level 7 model exceeds that time limits (it takes about 8 minutes to slice on a modern PC). To get around this (beta?) limitation, Print Profiles for the base of the .16mm Pyramid and Level 6 Pyramid models have been uploaded instead. For the actual Level 7 Sierpinkski Pyramid, download appropriate .3mf file from the Raw Files section.<img src="https://makerworld.bblmw.com/makerworld/draft/507170/2023-09-28_7d9dc5642ec5c.png"> All versions slice properly, and the non-A1 versions have been printed successfully.&nbsp;HistoryAfter having no luck slicing an existing level 7 Sierpinski fractal pyramid, I generated my own using OpenSCAD. OpenSCAD took nearly a day to generate a level 6 pyramid, so I almost gave up until I found there was an experimental Fast CSG option. It turns out a fractal pyramid is well suited to the new option and is at least 10x faster than the standard render option.&nbsp;In addition to the raw STL, some .3MF project files are included because it can be difficult to properly slice such a complex object in vase mode.Two 3MF (big_pyr_1_6 and big_pyr_2_0) are (almost) at the maximum bed size for the Bambu X1C/P1P. big_pyr_2_0 uses .2mm layer height which will take 28 hours to print using 374g of filament. While big_pyr_1_6 uses .16mm layers, is larger, and will take 40 hours to print using 446g of filament.The A1_2_4, A1_2_0, and A1_1_6 files are scaled to the fit the A1 bed size (<180mm) using 0.24mm, 0.20mm, and 0.16mm layer heights respectively. A1_2_4 will take ~17 hours, A1_2_0 ~21 hours, and A1_1_6 ~25 hours.&nbsp;The base_notch.3mf Print Profile is meant for the big_pyr_1_6_Bambu.3mf print. It is the maximum size that can fit on the X1/P1 print bed (without removing the filament cutter), and you should disable the calibration pattern for the print. The prime lines will overlap the model.<h4>Slicing Tips</h4>It can be difficult to successfully slice such a complex vase mode print. The difference between this<figure class="image image_resized" style="width:365.984px;"><img src="https://media.printables.com/media/prints/425623/rich_content/f1ecce08-d7cb-45fb-b0c1-c62be23c24db/thumbs/cover/800x539/jpg/slice_42.webp"></figure>&nbsp;and this<figure class="image"><img src="https://media.printables.com/media/prints/425623/rich_content/d08f3b22-6d4a-4a2e-ad7a-c32564b6a6b8/thumbs/cover/800x749/jpg/slice_40.webp"></figure>is adjusting the Line Widths by only 0.02mm.The method that gave me the most success with slicing was to scale the model to a precise height based on the layer height and the number of cells.Each cell is a pyramid. This Level 7 Sierpinski Pyramid is 128 cells tall because Level 7 => 2^7 = 128. To resolve each pyramid cell, you would probably want at least 5 layers. The more layers, the better resolved each cell will be. To find the height for the model simply multiply 128 x Layer Height x # cell layers. The maxed size Bambu print uses128 x 0.16mm x 8 = 163.84mm heightThat scales the base to the Bambu's max bed size without entering the “reserved” areas for the cutting tool or the prime lines.The slightly smaller version that takes 12 hours less to print uses .2mm lines so:128 x 0.2mm x 6 = 153.6mmFor these sizes, an Extrusion Width/Line Width is set to 0.42mm.&nbsp;Other print settings that needed to be changed were 0 bottom layers and setting the layer height for the first layer to be the same as the rest. Some wall generation implementations might be able to compensate for those settings being different, but I wanted to keep the math simple and reduce the number variables affecting the success of the slicing because it can take a long time on such a complex model.<h4>Related</h4>If you like this “basic” Sierpinski Pyramid, check out this variation for something more fancy. <a target="_blank" href="https://makerworld.com/en/models/77680#profileId-82022" rel="nofollow noopener">https://makerworld.com/en/models/77680</a>&nbsp;

Level 7 Sierpinski Fractal Pyramid (Vase Mode)

Fractal

Electronic 

john nixon

One for the little ones to make a jigsaw from there favourite pictures. Just trace cut out and create custom jigsaws

Kids jigsaw stencil

Puzzle

LorenzCR

Pokemon themed stencils, I hope your kids like them as much as mine did.If you want more stencils follow my profile or go to these links:&nbsp;Construckion Trucks <a target="_blank" href="https://makerworld.com/en/models/211048#profileId-230877" rel="nofollow noopener">https://makerworld.com/en/models/211048#profileId-230877</a>Letters and number <a target="_blank" href="https://makerworld.com/en/models/210784#profileId-230592" rel="nofollow noopener">https://makerworld.com/en/models/210784#profileId-230592</a>Animal <a target="_blank" href="https://makerworld.com/en/models/199936#profileId-220506" rel="nofollow noopener">https://makerworld.com/en/models/199936#profileId-220506</a>&nbsp;

Pokemon Stencil

Stencil

mklements

This enclosure is designed to house a Raspberry Pi 5 and the Radxa Penta SATA Hat to build a desktop NAS.&nbsp;There are two primary options, leading to four variants.<ul><li>With or without an acrylic window - this adds to the design aesthetic but may be difficult to make up without the correct tools</li><li>With or without holes for brass inserts - if brass inserts are not used, the holes are sized for M2.5 screws to be used directly</li></ul>Visit my blog for the full parts list with suggested purchase links and the assembly and setup guide - <a target="_blank" href="https://www.the-diy-life.com/i-built-a-4-bay-raspberry-pi-5-based-nas/" rel="nofollow noopener">https://www.the-diy-life.com/i-built-a-4-bay-raspberry-pi-5-based-nas/</a>

Raspberry Pi 5 Four Bay NAS

Raspberry Pi

matth.goff

This is a multi-piece award of an army sergeant first class patch designed for the intention of using different colors.For this model I used PLANo supports neededIroning can be used for a smoother surfaceI left the Name Plate blank so that anyone using Prusa Slicer can easily add their own text to the plate.Everything is inlayed so only some glue would be necessary to assemble.I may add more badges if there is any interest in the future for that. Feel free to leave a comment and I will see what I can do. Thank you

Army Sergeant First Class Award

Army

Mr.Jay

Dog coasters of a lot of breeds.&nbsp;I made these coasters with existing designs in Fusion 360. They print easy with Bambu Studio. The top side of the coasters is laying flat on the printbed, so the top gets a nice finish (textured or smooth) and there is not much waste in plastic.&nbsp;The size of the coasters is 10cm. I don&#39;t recommend to scale them down, because the details on the design will not print well. However they can be scaled up to make a nice ornament on the wall.&nbsp;If you print them in PLA, please be aware of putting hot drinks on them and don&#39;t put them in the dishwasher. If you want to put hot drinks on them, it&#39;s better to print them in PETG or ASA. &nbsp;The profile contains all the coasters I made until the end of April. After that I got much more requests of dog breeds and they can be found in my <a target="_blank" href="https://makerworld.com/en/u/2093862659/collections/190167" rel="nofollow noopener">Dog Coaster collection</a>.You can <a target="_blank" href="https://makerworld.com/en/my/message?recvID=2093862659" rel="nofollow noopener">message</a> me to add a request if you miss a breed, but I don&#39;t have all breeds. I did not make the designs of the dog breeds myself and I cannot make them from photo&#39;s.&nbsp;List of breeds:American bulldog American Staffordshire Terrier Australian Cattle Dog  Basset hound Beagle Bernese Mountain Dog Bordercollie Boxer Bulldog Cane Corso Cavalier King Charles Spaniel Chihuahua Cocker spaniel Dachshund Dalmatian Doberman Pinscher English bull terrier English Bulldog English Foxhound English Sheepdog french bulldog German Shorthaired Pointer German sheppard Goldendoodle Goldenretriever Great Danish Greyhound Jack russel Keeshond Labrador retriever Lhasa Apso Miniature Schnauzer Nova Scotia Duck Tolling Retriever Pekingese Pembroke Welsh Corgi Pomeranian spitz Puggle Rottweiler Rough collie Samoyed top down 0.2mm nozzle Shiba Inu Shih Tzu Riberian husky Yorkshire terrier

50 Different Dog Breed Coasters

Jenny

aPyroDesign

Inspired by the Auryn from the movie The Never Ending Story, this animated fidget spinner is designed to be printed as a multicolor print using the AMS. It can also be printed as single color.&nbsp;This fidget spinner is unlike a standard spinner. The shapes on the spinners are actually frames of animation. When you spin the spinner and view the spinner through a smartphone camera, the animations come to life. There are also two other ways to view the spinners. The instructions are below for the 3 different viewing methods.&nbsp;Smartphone Camera Instructions: Click <a target="_blank" href="https://spinnermation.com/pages/cell-phone-method" rel="nofollow noopener">HERE</a>&nbsp;Strobe Light App Instructions: Click <a target="_blank" href="https://spinnermation.com/pages/strobe-method" rel="nofollow noopener">HERE</a>&nbsp;3D printable handheld viewer: Click <a target="_blank" href="https://spinnermation.com/pages/handheld-spinner-viewer" rel="nofollow noopener">HERE</a>&nbsp;The optional parts for this viewer are included within the 3mf file.&nbsp;&nbsp;You will need an r188 bearing for the spinner and the viewer.Recommended bearings from Amazon: Click <a target="_blank" href="https://www.amazon.com/dp/B095GTJC1R?linkCode=ssc&amp;tag=onamztravi04a-20&amp;creativeASIN=B095GTJC1R&amp;asc_item-id=amzn1.ideas.1JB9SWU6KEPUY&amp;ref_=aip_sf_list_spv_ons_mixed_d_asin" rel="nofollow noopener">HERE</a>&nbsp;Assembly GuideEasy assembly video: Click <a target="_blank" href="https://drive.google.com/drive/folders/1zjWD1vB6mJ9Tk475IS7QAs6kHIoJ6YSH?usp=drive_link" rel="nofollow noopener">HERE</a>&nbsp;&nbsp;Filaments used in this project.&nbsp;PLA Basic Black for main body: Click <a target="_blank" href="https://shrsl.com/4g2n4" rel="nofollow noopener">HERE</a>&nbsp;PLA Silk Silver For Scale color 1 : Click <a target="_blank" href="https://shrsl.com/4hpm6" rel="nofollow noopener">HERE</a>&nbsp;PLA Silk Gold for Scale Color 2  : Click <a target="_blank" href="https://shrsl.com/4hpni" rel="nofollow noopener">HERE</a>&nbsp;All links are Affiliate links&nbsp;Files included:&nbsp;3MF file that is ready for AMS printing in Bambu Studio. File includes two quality versions. I recommend the high resolution version, but there is a 2mm layer height version that will print in half the time.&nbsp;3MF file for non Bambu Printers. I know not everyone has a Bambu printer and this one is for you all.&nbsp;Top and Bottom Cap files.&nbsp;Bearing Top Cap.&nbsp;(Optional) Bearing top tool. This will make it easier to lock on the bearing top cap.&nbsp;&nbsp;Interested in selling my spinners? Check out my Patreon for more info. Click <a target="_blank" href="https://www.patreon.com/APD" rel="nofollow noopener">HERE</a>&nbsp;&nbsp;

Auryn Zoetrope Spinner

Thingys

mcmaven

<h2>Summary</h2>The Triaxial Tourbillon is weight driven and these STLs are a remix of A26's original design that I modified to add support for ball bearings and some other features. This remix was never meant to keep correct time, also it is very inefficient so the weight only keeps it working for a couple of hours. Therefore it is not a practical clock.&nbsp;I designed the 'Triaxial Quartz Movement Upgrade', which replaces the clock face in this remix, so it could be used to display the correct time when it was hanging on a wall.&nbsp;The weight in this remix is painful to wind, so make it easier to animate I designed the Motorized Astronomia. For the Motorized Astronomia I basically started with a clean slate. All of the parts have been redesigned, with no intention to be compatible with my original remix.&nbsp;Hopefully this information will help you know which design to download.&nbsp;To keep more up to date with what I'm doing I started an Instagram page @mcmaven.pdx, where I'm posting some of my 3D printing and other designs that I haven't posted here.

Triaxial Tourbillon Clock Make/Mods

Clocks

ThreeD-Michael

Update 2023-12-15:I designed 2 more members of this whistle family:<ul><li><a target="_blank" href="https://makerworld.com/en/models/94674" rel="nofollow noopener">high pitched whistle</a>,</li><li><a target="_blank" href="https://makerworld.com/en/models/88573" rel="nofollow noopener">deep pitched whistle</a>.</li></ul>A gift for small and large children:This building bricks compatible steam train whistle produces a very realistic sound and can be blown softly or loudly. There are two versions, with and without eyelet.&nbsp;Please take a look at my growing <a target="_blank" href="https://makerworld.com/en/u/77030249/collections/87334" rel="nofollow noopener">Whistle Collection</a>.

Steam Train Whistle

Eden

Sitsero

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA BambuLab Basic BambuLab Green Transmission Distance: 8 PLA BambuLab Matte Lemon Yellow Transmission Distance: 4Swap Instructions: Start with Charcoal Black At layer #9 (0.8mm) swap to BambuLab Green At layer #13 (1.12mm) swap to Lemon Yellow for the rest.

Compsognathus - Jurassic Park ( Hueforge )

Dinosaurs

Janne.

Brio 180 Degrees TurningCategory: Mechanical Toys

Brio 180 Degrees Turning

Brio

Akelyte

VERSION 2 MODEL UPDATES:<ul><li>Adjusted dimensions and tolerances for an even better fit</li><li>Added more Pattern/Color Options</li><li>Lengthened Clips for better “Snap” Action and Snugness</li><li>Strengthened clips by adding 1mm of extra material</li><li>More Bed Clearance</li></ul>&nbsp;VERSION 2 PROFILE UPDATES:<ul><li>Speed - Slowed down and matched to walls for less visibility of layer lines and speed lines.</li><li>Supports - Adjusted Support Threshold Angle for better support removal and Patterns</li><li>More Patterns/Color Options</li><li>Switched to Gyroid Infill</li><li>Seam Position to Nearest</li></ul>2-1-2024:<ul><li>Added PETG and ABS Profiles</li></ul>&nbsp;Version 1 of the Z-Shield was met with mostly positive feedback and praise; so first off let me say thank you to everyone who downloaded or printed the previous model! I greatly appreciate all feedback and I hope V2 can surpass V1 in every way!To the few people who had fitment issues with V1 - Thanks for speaking up! This community can't grow without honesty and creators being held accountable for any potential design flaws. I always strive to learn and grow as a CAD Designer and Engineer, so any suggestions or feedback is encouraged and appreciated!&nbsp;---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------&nbsp;Introducing the Z-Shield Version 2; a superior Z-Axis Cover for Bambu Lab P Series and X Series Printers. I’ve seen countless Z-Axis Covers for the P and X Series that simply sit in the recessed hole for the Z-Axis rod. I was never a fan of these designs, as I don’t want any component of my printer unnecessarily rubbing against plastic every time the bed moves.&nbsp;These can be printed in PLA if chamber temps are kept on the low side, but printing in ASA or ABS would yield better results. I'd appreciate any feedback, comments, or ratings if you liked this model, or would like to see some modifications made!&nbsp;Key Features:<ul><li>Universal Compatibility: The Z-Shield has been meticulously engineered to be compatible with all Bambu Core-XY printers. Whether you own an older P1P or a top-of-the-line X1C, you’ll have no issues with fitment.</li><li>Fast Printing Capability: Efficiency is key in 3D printing, and the Z-Shield stands out in this regard. Printing with supports, most models should take an hour or less to print.</li><li>Camera-Friendly Design: Understanding the importance of the built-in camera in Bambu printers, I’ve added an additional model of the Z-Shield with a recessed corner. This design ensures that the cover remains completely invisible to the onboard camera, allowing for uninterrupted monitoring and recording.</li><li>Non-Contact Protection: The non-contact design ensures there's no friction between the cover and the moving parts of the printer, thus preserving both the cover’s and the printer's integrity.</li><li>Durability and Aesthetics: The Z-Shield not only offers robust protection against environmental factors but also adds a sleek, professional look to your printer.</li><li>Fully Customizable: The Z-Shield comes in 5 different patterns for maximum personalization. Customize colors, add gradients, or use the Bambu Text Tool to add your own text/logos!</li></ul>Printing:&nbsp;Cleaning your bed properly is important when printing the patterned covers. Make sure your bed has been thoroughly cleaned before printing!&nbsp;Installation:&nbsp;NOTE: INSTALL THE CLIP TOWARDS THE REAR OF THE PRINTER FIRST&nbsp;Make sure ALL support material is removed before installing.&nbsp;You should hear an audible click as the Z-Shield seats into position.<figure class="image image_resized" style="width:60.04%;"><img src="https://makerworld.bblmw.com/makerworld/draft/482222/2024-01-24_7b1608fe96c01.gif"></figure>There should be approximately 1.7mm of clearance between your build plate and the Z-Shield on the left side of the printer. Make sure it is fully seated towards the left side of the printer. The right side cover will have plenty of clearance but should be installed in the same way.<figure class="image image_resized" style="width:65.05%;"><img src="https://makerworld.bblmw.com/makerworld/draft/482222/2024-01-30_445d9192a9f4a.jpg"></figure>&nbsp;Without Camera Cutout (Cover is Visible):<img src="https://lh7-us.googleusercontent.com/i-LEeFsZ7mhDzLJoBrUFpaK5Cn5Ayh42kzByMlxjRzr8UvIq2a5LPpTnoe78sli4vxMe6kIyHyXK_228t2mwJlRtrkD-04mPqnYroHSkVYS-0WNieazHfjjHJfkTJJ3wlqeZr-n8ZRD_Kc9tQuQpT5J8avjcPYlg8IYEr5WYu7Y5RglaqBmpirXS-tBbXA">&nbsp;&nbsp;With Camera Cutout (Cover not Visible):<img src="https://lh7-us.googleusercontent.com/kTBd3_n4No1vWBt2XkfTouic3bVZd__YhO3Mgr0JYj-t8Hl48ZjBFeqc4WncfWH8GNcoTiL1w7pK1VieXHvNaKYcEIPeV91I3hxKaDiNlWuEQwHQI3y6uasFrQPMhFufEWhsRysiBWzlHUh2FFM2JeqDPc9vVaxofvwg2YZg12ArH8JV-M9sqQPhV_Ytxg">

Z-Shield V2 - Z-Axis Cover for P1P, P1S, and X1C

X1C Upgrades

Simple Solutions 3D

You do not have the right to sell this file or any prints of it.  You do not have the right to distribute the files.  If you wish to share, please provide the link to this page.  If you want commercial rights (sell prints of this file), be sure to check out my listing on <a target="_blank" href="https://cults3d.com/en/3d-model/game/scaley-dragon-egg-threaded" rel="nofollow noopener">Cults3D</a>.&nbsp;The Scaley Dragon Egg is the perfect home for your favourite 3D printed dragon! As my first organic design it features a super scaley texture, overhangs that can be printed for a smooth finish, and an addictingly easy to open and close thread ensuring a perfect alignment every time!&nbsp;100% scale fits a Baby Cinderwing3D dragon or two Tadlings or a 65% Articulated Crystal Dragon by Saber3D (thanks to @GenghisKhan39)150% scale fits a full size Cinderwing3D Crystal Dragon200% scale fits a 125% Crystal Dragon (thanks to @BloodyBooger)110% scale fits a a 75% Sabre3D Crystal Dragon (thanks to @kahems)&nbsp;If you find what size fits other models, please comment and I'll update the description with credits to you.&nbsp;I want to thank <a target="_blank" href="https://makerworld.com/en/models/102934#profileId-109616" rel="nofollow noopener">SprocketStudios</a> for the inspiration. I found their design and loved it, but needed to fix some overhangs so I designed my own from scratch after learning Fusion360.&nbsp;For those asking, the dragon picture is from Cinderwing3D and are available <a target="_blank" href="https://www.cinderwing3d.com/" rel="nofollow noopener">here</a>&nbsp;&nbsp;

Scaly Dragon Egg with Threads

Carla

3D design shop

After a long journey, I've finally completed my flexible skeleton dragon.&nbsp;It's a fun piece of toy that's incredibly flexible, with virtually all joints capable of movement. It has become a huge hit with the kids at home!&nbsp;I printed it on a smooth surface, which eliminates potential issues with adhesion on a textured bed. If adhesion problems persist, I recommend adding a brim.&nbsp;Improved version

Articulated Skeleton Dragon

Articulated

BT3D printing

World of warcraft logo wall art made with Hueforge. 3mf is precolored, for manual color change use:0.4 nozzle 0.08 layer height 0.16 first layer height 100% infill Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Blue At layer #9 (0.8mm) swap to Orange At layer #16 (1.36mm) swap to Pure Yellow for the rest.

World of Warcraft logo wall art

Shannon

Terminatordeux

The One RingFrom of the poster of the original movie remade in HUEFORGE;Added the one ring on it is mate black, red white and gold&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PETG JAYO Black Transmission Distance: 0.3 PLA Sunlu red Transmission Distance: 5 PLA Sunlu silk gold Transmission Distance: 5 PETG JAYO White Transmission Distance: 6!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!Swap Instructions: Start with Black At layer #6 (0.56mm) swap to red At layer #12 (1.04mm) swap to silk gold At layer #16 (1.36mm) swap to White At Layer #22 swap to psilk gold for the rest.&nbsp;The frame is in matte black

The One ring Lord of the rings Hueforge

Anne

Qjeezy

Valentines day Gnome sculptures that say LOVE.&nbsp;Print these and enjoy some nice family bonding time painting them for Valentine's day. The kids will love it, mine did. Alternatively, you can also paint them in the slicer and use an AMS to print in multicolor.&nbsp;Scale to any size.&nbsp;The printed objects are free commercial use. Go ahead and sell them at your craft shows and farmers markets! The file itself may not be sold, only physical printed love gnomes. &nbsp;Tip: Print with a light colored matte filament and regular Crayola markers works really well for coloring. Its still messy, but alot safer for the kids. Acrylic Paint markers also work really well, but the use of these should be reserved for adults only. &nbsp;&nbsp;

LOVE Gnomes

Marshall 

matt thibs

In Bambu Studio, Click on the Objects tab, then right click on &#34;Name Text - Edit This&#34;, and &#34;Title Text-Edit This&#34;. That should pull up a window to edit the text. There you can change the text itself, font and size.&nbsp;Also is included a Fusion 360 File that has parameters for dimensions if you want a different size Name Plate.&nbsp;&nbsp;The default settings do not include a brim, but please add one if you are worried about perfect bed adhesion. That may give you a better surface for the name.&nbsp;The font in this file was created with the PC version of Bambu Studio. If you are using the Mac version the fonts may be different. &nbsp;**Warning** Some users have noticed that after changing the text, that the name plate is no longer on the first layer. This may cause a problem in your print. Please verify that the first layer consists of the text and the name plate. If you think you know why this is happening in some instances please send me a PM.

Custom Name Plate - Flush Surface

Office

Kit Crafters

<h2>14,348,907 Revolutions</h2>That&#39;s how many times the motor must turn the first gear to get the last gear to rotate once. With a series of 15 gears with an average gear ratio of 1:3, it takes 3^15 or 14,348,907 revolutions for the Endless Gear Machine to complete one full cycle.<h3><a target="_blank" href="https://imgur.com/a/ku1Ip1G" rel="nofollow noopener">Here&#39;s a timelapse of the machine running for 10 minutes at 10x speed.</a></h3>Designed as a simple mathematical art piece, the Endless Gear Machine takes its time to show you the power of exponential growth. At one second per revolution, it takes approximately 166 days to complete one full cycle. Utilizing the gearbox motor that comes with the Bambu Lab Marble Run Kit, you too can print out and run your own machine that takes an agonizingly long time to complete a meaningless task.&nbsp;Each profile provided has all the parts laid out for ease of printing for those of you with Bambu Lab Printers/Bambu Studio. For other slicers/printers, here is the list of components needed (downloadable through the ‘Raw Model Files’ button):<ul><li>1x Base</li><li>2x Rods</li><li>2x Spacers</li><li>1x Power Gear</li><li>14x Gears</li></ul>The assembly is simple, the motor slots in to the base with the small nub fitting into the relevant hole on the Base. After that, you can take a look at this top-down image to see how to assemble the Gears. The Rods are slightly loose and can be glued to the Base if desired.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000158254/design/2024-01-26_624b64989da85.png"></figure><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000158254/design/2024-01-26_142664bef05e4.png">With the motor in the back, the Gear has the small gear facing the front. Only the left Rod needs the Spacers. The left Rod has its Gears set to the back while the right Rod has its set to the front. The coloring on the Gears is optional and the placement is arbitray, they&#39;re main purpose is to help show you how much each gear has rotated, if at all.&nbsp;Enjoy letting time pass by as this machine toils endlessly to accomplish nothing fruitful, but still something special.

The Endless Gear Machine

Mechanical 

Black Jack

This is an old school type of fire engine based on the <a target="_blank" href="https://www.printables.com/model/638666-yellow-artillery-tractor-chassis" rel="nofollow noopener">Yellow Artillery Tractor Chassis</a> model that I have released earlier. In that release itself I have explained how it is the universal platform on which various payloads can be added for specific function. This release contains the fire engine payload of the same.&nbsp;I am very thankful to <a target="_blank" href="https://www.printables.com/@BenoitLussier" rel="nofollow noopener">Mr Benoît Lussier</a> for his feedbacks which has helped me refine the model further. <a target="_blank" href="https://www.printables.com/model/693234-yellow-artillery-tractor-fire-truck-with-movements/comments/1409836" rel="nofollow noopener">Please Click Here to check out his make</a>&nbsp;<figure class="image image_resized" style="width:54.45%;"><img src="https://makerworld.bblmw.com/makerworld/draft/767907/2024-01-02_2fd7b34f59ec8.gif"></figure>&nbsp;If you have already downloaded and printed <a target="_blank" href="https://www.printables.com/model/638666-yellow-artillery-tractor-chassis" rel="nofollow noopener">Yellow Artillery Tractor Chassis</a> model, You would only need "Yellow AT Fire Truck Payload.3mf" file and Please skip to the title ASSEMBLY OF PAYLOAD.<figure class="image image_resized" style="width:44.44%;"><img src="https://makerworld.bblmw.com/makerworld/draft/767907/2023-12-25_rj39byqc9ztw.gif"></figure><h3>There are three ways to print this.</h3><ol><li>As single piece:- Please download STL file but there wont be any movements.</li><li>Multiple Pieces :- Download 3mf file with Full_dismantled.3mf.BEST QUALITY OUTPUT. Please use the 3mf file for assembly also. CHECK EASE OF PRINTING TITLE BELOW</li><li>Combined:- You may use any 3D viewer software like 3D builder in windows to merge components according to your printer and filaments. The sky is the limit for this. You may find a sample file ending with combined.3mf.</li></ol><blockquote>If you want to try TPU for tracks, you can download the "AT FireTruck TPU Tracks" which has the tracks and gears. You will need to replace all the gears and pinions in PLA version with the provided gear for TPU track working. but please note that I haven't tested them.</blockquote><h3>ASSEMBLY OF CHASSIS</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/767907/2023-12-25_90j8dfizni15.gif"></figure><h3>ASSEMBLY OF PAYLOAD</h3>Follow the GIF for assembly of payload.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/767907/2023-12-25_pqsexjh5yv9m.gif"></figure><h3>MATING WITH CHASSIS</h3>Follow the GIF for mating of payload with truck chassis. You can reuse the nut and bolt securing the Bed in the <a target="_blank" href="https://www.printables.com/model/638666-yellow-artillery-tractor-chassis" rel="nofollow noopener">Yellow Artillery Tractor Chassis</a> model to secure the payload. But you have to glue the nuts to the payload bed as shown in instructions.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/767907/2023-12-25_o6lw2hcicnog.gif"></figure><h3>Movements Included</h3><ol><li>Engine Bay Cover Swing Open</li></ol>NOTE The tolerances to some elements are zero which has been intentionally provided to friction lock the elements while not in movements. You may have to fine tune the tolerance from your end using scaling function in slicer to ensure good fit without compromising movements. This also applies for the pins that make rotation possible between elements. Please proceed with printing all the pins after testing printing a pin and testing the fit of a joint. You should be able to find the adequate scaling factor with this.&nbsp;Appreciate the makes uploads. Open for suggestions.&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/blackjack123" rel="nofollow noopener"><img src="https://media.printables.com/media/prints/693234/rich_content/68eff536-43c1-46ba-9e0c-f0744ca72906/image.png#%7B%22uuid%22%3A%22cd7c9786-cc79-4883-b801-ec717ea024bb%22%2C%22w%22%3A260%2C%22h%22%3A73%7D"></a> <a target="_blank" href="https://www.patreon.com/BlackJack123" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/767907/2024-02-10_677a07afa4c6d.jpg"></a>

Yellow Artillery Tractor Fire Truck with Movements

Scale Models 

SmashD

<blockquote>"3D printing: the cutting edge frontier. These are the creations of the 3D printing pioneers.  Their mission: to craft innovative designs, to bring ideas to life in new dimensions,  to boldly print where no object has been printed before."</blockquote> Well, yeah …  I've seen (and printed) the <a target="_blank" href="https://makerworld.com/en/models/53373#profileId-55147" rel="nofollow noopener">Piece of Junk in Space - Hueforge Hybrid Print</a> and liked it so much that I've tried to adapt this concept to the TOS Enterprise. The model is from Solid_Alexei's <a target="_blank" href="https://www.thingiverse.com/thing:1423364" rel="nofollow noopener">Ultimate Collection</a>, the warp speed background is custom made in Illustrator and Photoshop. I did not make the background 4:3 since I just like widescreen better 😅 To make printing easier (or more likely to not fail) I've strengthened the neck part and had to add some tree support. In my case it was relatively easy (but be careful!) to remove the support and it does not leave too much marks.  It is not a pristine finish though, of course, it's FDM after all, so I tried to make the support base as flush as possible so you could maybe sand it a little … while trying to reduce the stringing (especially my red filament) with a toothbrush and finally a small heatgun I've managed to accidentally warp the background. Ha … warped the warp. Well, don't do that, please! 😉 If you are using the one-click 3MF file on Makerworld (aka the “print profile” in the top right), all appropriate settings have been applied to the print (PLA filaments)!  Slice it, print it, done. Well … at least sometimes, let me explain: beware, it's taking time to calculate and I had to try countless versions with several stages of polygon reducing, mesh fixing and other voodoo so Bambu Slicer wouldn't freeze up during slicing, the provided file is -of course- the successful one …  If you are having problems, what mostly helped with avoiding Bambu Slicer from taking seemingly forever was<ol><li>slicing it without tree support (caution: might still take several minutes!)</li><li>re-enabling tree support</li><li>slice again</li></ol>This way it somewhat resumes/starts from 80% and finishes without freezing. But if someone knows a better, more reliable way, PLEASE LET ME KNOW. I've spent hours fiddling around with model re-meshing/reducing and slicing alone, it's very frustrating.   If you are not using the one-click printing method, or are not using a Bambu printer, read on:<h4>Print Instructions (manual settings):</h4><ol><li>print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm</li><li>yes, even the space ship portion</li><li>You do need some supports for this print for the underside of the disc</li><li>I used matte black as the background for the print, but you can use any variation of a dark or black color</li><li>I used Bambu Lab PLA Matte Ash Gray for the Enterprise, but you can use any gray or silver variant, or whatever you like</li></ol><h4> Filament Swaps (4 colors, 4 swaps):</h4><ul><li>Start with Black</li><li>At layer #17 (1.44mm) swap to Red</li><li>At layer #25 (2.08mm) swap to Ash Gray</li><li>At layer #27 (2.24mm) swap to White</li><li>At layer #31 (2.56mm) swap to Ash Gray again, for the rest of the print</li></ul><h4> Filament I've used:</h4><ul><li>Black: <a target="_blank" href="https://amzn.to/486FCDo" rel="nofollow noopener">Extrudr PLA NX2 matt schwarz</a>*</li><li>Red: <a target="_blank" href="https://amzn.to/3OvBAgR" rel="nofollow noopener">eSUN PLA+ firetruck red</a>*</li><li>Gray: Bambu Lab PLA Matte “Ash Gray”</li><li>White: <a target="_blank" href="https://amzn.to/4blLxaA" rel="nofollow noopener">Extrudr PLA NX2 matt weiß</a>*</li></ul>&nbsp;Notes:<ul><li>*The used link is a so-called affiliate one. When you buy a product using this link, I will receive a small provision. The price itself does not change. Thanks so much for your support :)</li><li>I am not affiliated with Paramount or any other license holder nor is this print an official release. It's just a fan and hobby project made at home and should not not condone theft of copyrighted material and I don't want to get into even the slightest trouble because of that.</li></ul>

Enterprise TOS - HueForge Hybrid Print

Michael

pbbence1994

A fairly accurate kit card model of a Bell 206B Jetranger helicopter.With it's beautiful multicolor paintjob looks good as desk decoration, but it can also serve as a fidget toy, because the props can spin pretty satisfiingly well. Cut the part out with pliers or nail sissors. The assembly is easy and self explanatory. Have fun printing it!&nbsp;

Helicopter Kit Card (Bell 206B Jetranger)

Kit Cards

camillabertrand

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Swap Instructions: Start with Black At layer #5 (0.48mm) swap to Red At layer #11 (0.96mm) swap to Latte Brown At layer #15 (1.28mm) swap to Beige for the rest.&nbsp;You can scale the model up to 200x200 mm. Don't change the height

Hueforge - Dragon

HueForge

Victor

Design reference rules, it is specially useful while modeling and taking measurements of real world objects. They are designed to fit inside Digital Calipers Case. You might also like this model:<a target="_blank" href="https://makerworld.com/en/models/135018" rel="nofollow noopener">https://makerworld.com/en/models/135018</a>&nbsp;Thank you for printing my model!If you'd like you can buy me a coffee here: <a target="_blank" href="https://www.buymeacoffee.com/vitim" rel="nofollow noopener">https://www.buymeacoffee.com/vitim</a>

Fillet Radius Finder (Inner/Outer) - Design Reference Ruler 1 to 12mm

Tools

Leif H.

This is a fairly simple, straight forward HP counter. Everything prints without supports. The numbers can optionally be inset with a different color, which are best glued in place with super glue. The frame has three options, one with an embossed pointer, one with an inset (which is what I printed here), and one with separate parts for color printing.<h4>Updates</h4><ul><li>2024-02-19: Added an optional left wheel, with the #9 embossed. Both the plain and colored wheel now has this option.</li><li>2023-12-20: I added the 3MF and .step files for the colored number wheels.</li></ul><h4>Printing and assembly</h4>The colored versions (for printing on printers with multiple colors), there's no assembly.&nbsp;Nothing special here, everything prints flat. Make sure that you place the wheels with the flat side down of course. If you are doing the insets for the numeric wheels, I noticed that the number 8 tends to print a little worse because of the bridging. Before gluing in the number 8, trim the bridges in the wheel. I only noticed this issue for 8.&nbsp;I noticed that the uploaded STL files aren't oriented the way they should be printed. I'll fix this later, but the .3mf has all the models properly loaded and oriented.&nbsp;The text model and the pointers are optional, and only needed if you are planning on doing the insets.

Hit Point counter for games (e.g. D&D)

neo862

A height block compatible with Gravitrax from Ravensburger. The bricks corresponds to 5 or 10 original dark grey height bricks and has tunnels through which the long tracks can be guided. Perfectly suitable for Gravitrax platforms.&nbsp;*** UPDATE ***I heard you guys. Now with an optimized connector that is a little less tight and shouldn't break off as easily.  Ein Höhenstein kompatibel zu Gravitrax von Ravensburger. Der Stein entspricht 5 bzw. 10 orginal dunkelgrauen Höhensteinen und hat tunnels durch die man die langen Schienen führen kann. Perfekt geeignet für Gravitrax Platformen.&nbsp;*** UPDATE ***Ich habe euch gehört Leute. Jetzt mit einem optimierten Verbinder der etwas weniger fest sitzt und nicht mehr so leicht abbrechen sollte.