Printied perfect with ABS. No issues putting a desiccant packet inside and fits perfectly between two spools in the filament dryer. First one came out perfect so I printed two!! Nice job!

Perfect!! No issues whatsoever. Love the separation of pieces to save time and filament! Thank you!

Printed perfectly, look great in multicolor Easter pastel colors and will certainly be enjoyed by family as Easter gifts. 👍🏻

Excellent! I was just going to shove these in a drawer (or box), but I’d probably forget where they were so this helps out a lot! Keeping them in the open and close by when needed is the best part! I used double sided tape to stick it to the side and neatly out of the way. Thank you!

Nice size, quick print and perfect fit! Love this! Thank you!

Simple, yet perfect. Thank you.

I didn’t know where to put my 4-n-1 adapter until I saw this here on MW. I didn’t want to have to find additional hardware and I won’t ever need an additional 4-n-1 adapter (only need one AMS 2 Pro) so this is perfect for my needs. I used ABS for the print, some double sided tape to put the adapter onto the mount and a secured them with a zip tie to hold them together and it’s in a perfect spot for both the AMS tube and the external spool I mounted on my AMS flipper setup.

At first I asked myself “How the heck do I put this on?” because I thought this thing slid into some grooves to hold it in place. It doesn’t. Luckily, I had some double sided tape handy and it worked perfectly. Thank you! This was an item I didn’t think I neeed until I saw it here on MW. Fits perfectly on the H2S.

Yep, these are the best clips out there on MW. Quick print, easy to install and hold very well. They help “train” the tubes when you twist them so that’s an added bonus with these. My new “go to” tube clip, for sure. Thank you!

Quick, functional and perfect for aesthetics of the printer. Nice work!

Perfect fit and a quick successful print. I’ve had my H2S Combo for a week now and it’s been running like a champ. Better to get these printed and installed now to prevent future issues. Thank you!

Tight fit so I hope I can get it off okay when needed. Thank you.

Quick print and looks good but it’s a loose fit so I’ll have to keep an eye on it so it doesn’t come off while printing. Thank you.

Love this! Had to burn the last of a spool of filament so I printed it in multicolor. Now I just need to get a light strip for it. 🎉

No frills, no issues - just works! Thank you!

They fit extremely well and were easy to put in place. Excellent design! Thank you.

Excellent! Works very well and doesn’t clog the chute! Magnets hold up well since it’s light weight. No more using a box on the floor to catch the droppings. Thank you!

Excellent. Works well with good double-sided tape. Thank you!

Filament got stuck when feeding from AMS 2 Pro. Did I tighten the connectors down to much? Did I shove the tube too far in? I will have to watch this carefully if multicolor printing until I figure it out.

Works like a charm. Snaps in place very well and tubes go right in. Printed in ABS and have zero issues. Thank you!