user_1445441536

ThreeD-Michael

<figure class="table" style="width:50%;"><table><tbody><tr><td>News 2024-04-10:Please also check out my new <a target="_blank" href="https://makerworld.com/en/models/422861" rel="nofollow noopener">Blade Dispenser</a> for this Bed Scraper:<figure class="image"><a href="https://makerworld.com/en/models/422861" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/843986/2024-04-10_3fff13c94089c.png"></a></figure></td></tr></tbody></table></figure>This is the XL version of my popular <a target="_blank" href="https://makerworld.com/en/models/231936" rel="nofollow noopener">Optimized Bed Scraper</a> with quick-change blades. The cutting edge of the blade is 45 mm, a full 30% longer!&nbsp;Each blade weighs just 1.8 grams - and since each blade has two cutting edges, only 0.9 grams of filament is required per cutting edge. It couldn&#39;t be more economical, and you can now replace the blades more often without feeling guilty.&nbsp;Print Settings:This design has been optimized for printing with a layer height of 0.2 mm, so please do not use a different value. The first layer should have a line width of at least 0.5 mm. In order to get the sharpest possible blade, you should choose a smooth printing surface if possible.The locking mechanism has been optimized for PLA, so I recommend this filament for the handle. You can also print the blades with PLA - as long as you don&#39;t scratch on a bed that&#39;s too hot for PLA. In this case, I would recommend a more heat-resistant filament, for example PETG.&nbsp;Assembly:That is very easy. Simply slide the blade into the handle. But be careful - the blades are sharp, so don&#39;t push them in with your finger, but insert them loosely and then push them all the way by pressing the blade on a solid surface.

Optimized Bed Scraper XL

Stampati

RH3D

I really liked the idea from <a target="_blank" href="https://www.printables.com/cs/model/32160-screw-measuring-tool-m2-m10-4-120mm" rel="nofollow noopener">Boogie</a> for screw measuring/sorting helper but decided to design my own with some of his approach in mind.Little printing tip for anyone - just print the two top layers or the 3rd layer from top different colour from the rest and you&#39;ve got coloured letters. (Use filament change or even pausing the print and manually changing the filament will work.)&nbsp;FEATURES<ul><li>size of a credit card so you can put it in your pocket or a wallet</li><li>screw sizes M2 - M12</li><li>screw length 0 - 84 mm</li><li>uses less filament, is faster to print but still working great</li></ul>Note: This is reupload of my original design from <a target="_blank" href="https://www.printables.com/en/model/476182" rel="nofollow noopener">Printables</a>.

Screw measuring tool - card size - M2-M12, 0-82 mm

gadget

zizzo81

Ambigram generator (fully customizable) NEW v2.1!

Antonio

plugowski

Under Desk Cable Clip, the ultimate solution to your cable organization needs. &nbsp;Designed to effortlessly tidy up your workspace, this sleek and compact accessory is a made for anyone tired of dealing with tangled cords and messy desks.&nbsp;Crafted with convenience in mind, whether you prefer the stability of screws or the simplicity of double-sided tape, rest assured that your cables will stay in place securely.&nbsp;Thanks to its printed-in-place construction with a tight hinge, this cable clip offers durability and reliability, ensuring that your cables remain neatly organized for the long haul.&nbsp;Say goodbye to frustrating cable tangles and hello to a clutter-free workspace.

Under desk cable clip for cable management.

Ufficio

kisik20

New info: some including me wanted to create a smoke absorber for soldering, here is a new project:<a target="_blank" href="https://makerworld.com/en/models/495413" rel="nofollow noopener">https://makerworld.com/en/models/495413</a>ENJOY&nbsp;INFO: Hi guys, i have news for you. I made new crocodile clip. Clip is smaller and bether for work. Enjoy Clip is here:<a target="_blank" href="https://makerworld.com/en/models/492860" rel="nofollow noopener">https://makerworld.com/en/models/492860</a>&nbsp;Soldering Tool Holder. Adjust the support pipe arms, regulate the whole project. When 2/4 arms needed, only adjust the base arms, very convenient to change the height, angle of gripping without tedious and stiff to adjust arms one by one, or put items off and put on to change the orientation. More freely than traditional single helping hands arms and protect your precise item.&nbsp;1.The three to six hand tool quickens soldering,electronics, and DIY projects allowing you to finish your work faster than ever before! Our Third Hand makes positioning a breeze with2.base save space,Easy to carry,Free hands3.alligator clip tips for 360 degree rotation for easy operation and work4.Super compact design for an ultra portable third hand tool5.Very suitable for the complex difficulty welding such as model airplane repair, easy to clamp the solder and operation.

Soldering Tool Holder Flexible Arms helping hands

Elettronica

Eternity Labs

I have always loved playing with aerodynamic flying Discs - Frisbees with a hole in the middle.&nbsp;Can be thrown from 100-200ft in testing depending on wind conditions.&nbsp;Unique Aerodynamic shape - offers the disc the ability to slide through the air with minimal friction compared to traditional frisbees or frisbee rings! &nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000485323/design/2024-06-05_bc01e553dc43e.png"></figure>&nbsp;This is an example of what an airfoil/aerofoil looks like. This isnt my exact design, that is a secret! &nbsp;Try something new today! - Give me a follow to see my latest work - released nearly every day! &nbsp;They fly for a very very long time and are great fun.&nbsp;I have replicated the profile of an aeroplane wing in order to create uplift on the front edge of the disc as it flies through the air.&nbsp;Play with 2-6 Players, and get some distance to see the disc slice through the air!&nbsp;I am testing mine out today in PLA and PLA+, but I will probably make this in TPU tonight as it will take impacts if playing on grass or hard surfaces.&nbsp;I hope you enjoy this model.&nbsp;Consider giving me a boost if this model was useful!&nbsp;Ways to support me &amp; access to commercial licences:&nbsp;<a target="_blank" href="https://www.patreon.com/Eternity3D" rel="nofollow noopener">https://www.patreon.com/Eternity3D</a> - Free membership available for some .stl access, paid membership needed to resell prints of my designs.&nbsp;One Time Direct support - <a target="_blank" href="https://buymeacoffee.com/eternity3d" rel="nofollow noopener">https://buymeacoffee.com/eternity3d</a>

Flying Disc - Aerodynamic Ring - Frisbee 飞盘 飞碟

Giochi mare

Jorge Rui

<h3>Introduction</h3>I bring you something very simple and utilitarian. As with previous projects, there&#39;s already a proliferation of similar items on 3D printing websites. – This is a card wallet featuring a clip that can be used both to securely close the wallet and to hold a few banknotes.I took this opportunity to use carbon fiber effect build plates. Although “faux finishes” aren&#39;t typically my favorite thing, the aesthetic result is interesting, and I was eager to experiment with some build plates that I have and this wallet project provided the perfect excuse.I&#39;ve used the Carbon Fiber Surface from <a target="_blank" href="https://shrsl.com/4kcmz" rel="nofollow noopener">Bambu 3D Effect Sheet</a><figure class="image image_resized" style="width: 25.95%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000484840/design/2024-06-04_ef54f78707e49.png"></figure>The assembly is straightforward and can accommodate five cards, with the option to adjust for more or fewer cards, at the moment you can use the scale tool at the correct axis on the slicer of you preference.&nbsp;<a target="_blank" href="https://youtu.be/6ih9Qji1UNE?si=aSGusJf2BXTL5wcs" rel="nofollow noopener">Inserting and removing cards clip</a>&nbsp;A larger version, for 10 cards will be made available in a couple of days.I know it might seem like the cards are punctured, but that&#39;s not the case. Instead, &#34;blisters&#34; are used for each card, allowing for easy handling without the risk of them falling out.<figure class="image image_resized" style="width: 39.19%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000484840/design/2024-06-04_3f4b14e0d66e8.png"></figure><h3>Variations and Material used:</h3>The dark material used is the fantastic<a target="_blank" href="https://shrsl.com/4cvrd" rel="nofollow noopener"> &#34;Lava Grey,&#34; which is PLA+CF</a> from Bambu Lab. However, you can use any material of your preference (PLA).I chose this one for its deep matte finish. On the other hand, I know I lost some of the three-dimensional effect offered by the 3D build plate. Nonetheless, I personally prefer the subdued effect. If you desire maximum impact, then use regular PLA (be careful, these build plates are not suitable for PETG). Any of the <a target="_blank" href="https://shrsl.com/4ctbi" rel="nofollow noopener">Bambu lab regular PLA</a> with the color of your choice will do, this red if the Prusament.&nbsp;<h3>Assembling</h3>The assembly is quite simple. There is only one consideration, which may depend on your printer. In some cases, the nut might offer some resistance when being screwed in. However, it&#39;s just a matter of patience and applying a bit more tightening force. If it proves impossible, first check if the thread was printed correctly or if there&#39;s any filament out of place. If necessary, you can adjust the scale on the two lateral axes to widen it.&nbsp;<a target="_blank" href="https://youtu.be/sa2iDvdLZCk" rel="nofollow noopener">Assembling clip</a><h4>Support the designer:</h4>This design is free for the benefit of the community, but If you like my designs and want to contribute, you can make a donation to <a target="_blank" href="https://www.buymeacoffee.com/designrepcom" rel="nofollow noopener">buymeacoffee </a>or <a target="_blank" href="https://www.paypal.com/donate/?business=BUM67EMDJRXSN&amp;no_recurring=0&amp;currency_code=EUR" rel="nofollow noopener">paypal, </a>or even better, join “My Club” here in printables.com, that will be greatly appreciated.<h3>Change Log</h3><ul><li>(04-06-2024)- Initial Release</li></ul>

A Simple Wallet

michelem

<figure class="image"></figure>UPDATE 05 Feb 2024:<ul><li>added 14.5mm LED size with base of 17.5mm</li></ul>UPDATE 02 Feb 2024:<ul><li>added 10mm LED size with base of 13.2mm</li></ul>UPDATE 13 Nov 2023:<ul><li>added 90° and 180° curved corners</li><li>added 8mm LED size with base of 11.8mm</li></ul>&nbsp;Hello makers,I created this model for a personal project and thought it would be helpful to share it with the community. It&#39;s a support for LED strips that could prove useful to anyone in need.&nbsp;The original project consists of a simple solid wood shelf with a square housing designed to accommodate an LED strip.&nbsp;I began with the basics: a base with an integrated guide for the LED strip. This guide allows you to secure the strip without the need for adhesives; simply slide it into the guide to keep it stable and in place.&nbsp;To attach the support to the wall or any surface (as I did in my case), you can choose between using adhesives or small screws to fit into the designated slots in the base.&nbsp;Screws must have this shape with 6mm head:&nbsp;&nbsp;<figure class="table"><table><tbody><tr><td>&nbsp;<figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000059751/design/2023-11-08_d66bf9bcae9ce.jpeg"></figure></td><td>&nbsp;&nbsp;<figure class="image image_resized" style="width:51%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000059751/design/2023-11-08_bf7762b4a9d2f.jpeg"></figure></td></tr></tbody></table></figure>&nbsp;Additionally, the base is designed with openings to reduce filament usage and provide better ventilation for the LED strip.&nbsp;I also created a diffuser with guides for easy attachment to the base.&nbsp;Finally, I included two end caps: one with a hole to pass cables to an external controller and one to completely close the opposite end.&nbsp;Printing:&nbsp;There are no specific requirements for printing the base. If your LED strip tends to overheat, I strongly recommend using a high-strength filament like ABS, ASA, or PETG. However, PLA will work well in most cases. No support is required.&nbsp;Regarding the diffusers, I recommend printing them in white (avoid transparent materials as the LEDs will be visible otherwise).&nbsp;Since they are printed with the bottom side being visible, it might be a good idea to use a textured print bed to achieve a better finish (check pictures). However, the most important aspect is to ensure that the side in contact with the print bed is perfect, without any roughness or adhesive residues.&nbsp;Formats:&nbsp;If needed, I may release the source file to make it fully parametric. For now, you can choose between two common formats:<ul><li>LED strip approximately 9 mm wide</li><li>LED strip approximately 12 mm wide</li><li>LED strip (COB) approximately 8 mm wide</li></ul>9 and 12 formats fit a 15.8 mm wide base while the 8mm has a 12mm one.&nbsp;I included also different lengths to be printed in almost any printer (150mm and 250mm), if you need intermediate length just cut it.&nbsp;Remember to get the same led size for each component, a diffuser for 9mm strip doesn&#39;t fit in the 12mm base.&nbsp;If you need different sizes, feel free to ask!&nbsp;I hope this model proves useful for your projects. Happy printing!

LED Strip Holder - Diffuser - Accessories

Hey,after thousands of downloads coming from my first two versions of this filament clip, I decided to make one last version to improve to perfection. I have gotten a lot of feedback from my old versions, that I have carefully reviewed and implemented them on this version. Check out the Version 1 and 2 of this filament clip on my profile: <a target="_blank" href="https://makerworld.com/en/@Tim04" rel="nofollow noopener">https://makerworld.com/en/@Tim04</a> If you like this model please consider boosting it! Here are some of my other models: <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000483185/design/2024-06-03_092f45cb5e97d.jpeg"> <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000483185/design/2024-06-03_b62b79afdaf23.jpeg"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000483185/design/2024-06-03_3426aa5ec83b4.png"></figure>

Filament Clip Hexagon V3

Tool vari stampa e accessori

user_556845548

This is my take on large numbers for the AMS Lite. These are sized to fit snugly on the AMS (including that the bumps for 1 &amp; 2 are slightly different sizes then 3 &amp; 4).

AMS Lite Number Covers

braga3dprint

The 3D model of a simple lightbox is a tribute to the beloved world of creativity and building. This minimalistic yet iconic design showcases a symbol of imagination and play. When illuminated, the lightbox brings a sense of nostalgia and fun, making it an ideal addition to any enthusiast's collection or a child's room. Let the warm glow of this lightbox kindle the spirit of innovation and creativity in your space, paying homage to the timeless joy of building blocks. It's not just a lightbox; it's a beacon of inspiration. 🌟🧱🌈 If you don't have or don't want to install LED's you can just glue the parts together and have an awesome sign! WARNING!- remove purge line at the beginning of the print, it may interfere, specially with bigger prints! <img src="https://i.redd.it/uo838wkstaqa1.png">&nbsp;Materials and tools: - glue gun - aluminum tape - led strip (here is the one I <a target="_blank" href="https://pt.aliexpress.com/item/1005004253095880.html?spm=a2g0o.order_list.order_list_main.16.1df1caa45b098E&gatewayAdapt=glo2bra" rel="nofollow noopener">use</a>): simple 1m white led USB or go wild with RGB - as long as the LED density isn't too low (very few LED's per meter) you should be able to achieve a good result- soldering iron (optional)&nbsp;RECOMMENDATIONS- use a textured PEI sheet - use the print profile, it has quite a few setting changes that help achieve the best results - make a hole for the USB strip wherever you like it best with a soldering iron, drill or in the slicer- use the aluminum tape on the inside of the backplate to help with light diffusion - glue the LED's the further away from the colored design possible; placing them too close ruins the diffusion and the individual LED's become visible Bambu Studio Settings: I always recommend using the print profile I provided since it has settings with which I've been able to get the best results. If you choose not to here are the main slicer settings I recommend: - preferences (ctrl + P) → activate developer settings → Quality →Advanced → First Layer Flow Ratio: 1.04 - Quality → Wall generator → Arachne - Quality → Wall transitioning threshold angle → 50º - Strength → Advanced → Infill/wall overlap → 20% - Quality → Advanced → Avoid crossing walls - Increasing retraction / reducing temperature can help reducing wisps - Order color printing from lightest to darkest color How to make a hole in Bambu Studio:<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=OsA23WCxRtg"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/OsA23WCxRtg" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure> Assembly video:<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=QNsShLmXYh0"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/QNsShLmXYh0" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Brick Building Block Lightbox LED Lamp

Lampade

chiz_m

<h3>The most effective, ergonomic and easy-to-use PTFE release tool for the A1 – the EZ A1 PTFE Release Tool!</h3>*** For best results, please see Tips for Success section ***<h3>If you find that this tools works great for you, pls hit that BOOST button!</h3><h3>PROBLEM</h3>PTFE tubes on the A1 AMS Lite hub is difficult to remove. Per the Bambu wiki, one has to press down the locking ring with a tweezer in order to remove the PTFE tube. I find it too fiddly and I&#39;m afraid that constantly doing so will eventually cause the gantry to sag and affect alignment.<h3>SOLUTION</h3>Design an ergonomic tool that will allow easy release of the tube without pressing the entire hub down using only one hand while allowing the other hand free to pull the PTFE tube.<h3>FEATURES</h3><ul><li>Stable and efficient - less prone to errors as tool attaches to the hub preventing accidental sliding</li><li>Easy to use - Designed with the best user experience in mind! Operate the tool comfortably and naturally by squeezing the thumb and index fingers together</li><li>Less damaging to the printer - during operation of the tool, stress is limited to the filament hub only and not to the entire gantry</li></ul><h3>PRINTING DIRECTIONS</h3><ul><li>Choose between the default profile (better print quality) or the vertically-oriented profile (recommended for smoother operation) which makes the layers on the thumb press perpendicular to the layers of the clamp part which allows for smoother sliding action.</li><li>Use rigid filaments such as regular PLA, PLA+, ASA, ABS, etc. DO NOT USE matte or silk PLA as these filaments are soft and do not provide strong layer adhesion.</li><li>Print as oriented.</li><li>Comes with built-in supports. No need to turn on supports.</li></ul><h3>TIPS FOR SUCCESS</h3><ol><li>If you find the tubes still very hard to pull out, try pressing the tube down slightly to allow the metal locking teeth to release before pulling the tube out.</li><li>Make sure that you have the thumb press aligned in the corner and that it&#39;s pressing only one ring at a time. Otherwise, if it&#39;s hitting other rings, you might not be pressing the ring down enough.</li></ol><h3>HOW TO USE</h3>IMPORTANT: Tool is not meant to be permanently attached to the printhead as it will prevent filament tangle detection to work. Remove the tool after use.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000392785/design/2024-04-27_283930b7afd63.png"></figure><h3> </h3>

EZ A1 PTFE Release/Remover Tool

竹子脚跳

如果你的格力遥控器和我图片上一样，那就可以使用。其他的遥控器大小不一致不一定能使用。打印机拓竹A1，使用 0.20mm Strength 默认配置，需要支撑。