These hotend storage boxes can hold 16 or 8 hotends with an optional labeling system. A set of 4 have been designed to store the hotends for the P2, H2S, H2D printers and the inductive hotends used on the H2C. Another set of 4 have been designed to store the hotends for the A1 printers.

Here's a storage box which can hold 16 or 8 hotends with an optional labeling system. The storage box, that has an hinge, that can be printed in place without supports and the lid features a latching mechanism for the lid. The 16 unit devices can only be printed on the H2 series because of the size of the print bed.

I needed an adapter that could be quickly disconnected. This adapter will allow a 3" exhaust hose to be connected to a 4" exhaust hose with a simple quick disconnect. I needed to route a 4" exhaust hose from the Bambu H2D exhaust to a ACMER AP220 smoke purifier with a 3" inlet. This was for when I was using the H2D laser. I also needed to disconnect the exhaust hose from the smoke purifier when just 3D printing. If I didn't the excessive heat would affect the chamber temperature.

A friend mentioned how an extension is needed for the Clicqear golf umbrella holder. After using my umbrella the first time, I saw why he needed an extension. Funny thing is we are both below average height!