Print profile o.k. - There is still room for improvement. (1) As can be seen in the picture (Image-01), the model does not securely hold the kitchen utensils (e.g., knives). This is not necessary. Reason: Risk of injury! Suggestion for improvement: All vertical sides of the model should be provided with the existing honeycomb structure. (2) Ventilation from below is completely missing. This is not necessary. Reason: Moisture remains underneath the model at the installation location. Suggestion for improvement: The base plate should be provided with appropriate ventilation holes and four small feet (e.g., 3mm high). (see Image-02, Image-03, however, the suggested four small feet, e.g., 3mm high, are still missing here.) (3) Unfortunately, the model was not found to be stable even when almost fully equipped with the appropriate kitchen utensils. This is not necessary. Suggestion for improvement: The side length of the model's base should be approximately 2/3 of the model's height.

Einfach top(!) und danke! - Das sind die Lösungen, die einfach nur funktionieren und jeden begeistern. Die Funktion des Gewindes einfach top, keinerlei Probleme, so muss es einfach sein. Bemerkung: (1) Möglichkeit einer universellen "Stütze" ohne die vier Befestigungsbohrungen im Fuß prüfen ! (Der bisherige Durchmesser ist o.k.) (2) Möglichkeit des Angebots von zusätzlichen "Verlängerungen" zur Vergrößerung der Stützweite prüfen. (3) Die mögliche Verlängerung sollte im Fußteil steckbar sein (Zapfen/Bohrung). Simply fantastic(!) and thank you! - These are the solutions that simply work and delight everyone. The thread function is simply fantastic, no problems at all, that's how it should be. Note: (1) Check the possibility of a universal "support" without the four mounting holes in the leg (the current diameter is OK). (2) Check the possibility of offering additional "extensions" to increase the support width. (3) The extension should be pluggable into the leg section (pin/hole).