Achabai

PeterB

What's better than gridfinity or the honeycomb storage wall? A set of drawers that work with gridfinity AND the honeycomb storage wall. This is fully parametric so you can adjust everything, but the STL's are sized to fit on my Bambu A1 Mini. &nbsp;You need to superglue the baseplate on top of the drawers.&nbsp;Pictured with standard gridfinity bins (Up to 5U on top of the drawer) and standard honeycomb-wall accessories.&nbsp;&nbsp;&nbsp;

Gridfinity and Honeycomb wall modular drawers.

GRIDFINITY

slingshot

This is an enhanced version of the standard Dyson 11 bin opener cam that can either be used to replace a missing/broken part or to improve the opening efficiency of the bin. I found that after many years of service my Dyson would not ‘pop’ open the end of the bin, upon inspection I found that extending the cam by 1.5mm would solve the issue, so here is my design

Dyson V11 Bin opener cam (improved)

VACCUM PARTS

Roland Deschain

This design is heavily inspired by the <a target="_blank" href="https://www.printables.com/model/420233" rel="nofollow noopener">Wallmount for Bambu AMS</a> model created by <a target="_blank" href="https://www.printables.com/social/128680-stefanwox" rel="nofollow noopener">StefanWoX</a>. I wanted my AMS unit slightly further from the wall and saw room for improvement so I spun up my own.&nbsp;This version is stronger than my <a target="_blank" href="https://makerworld.com/en/models/30231#profileId-83015" rel="nofollow noopener">original version</a> and better supports the full length of the AMS. The AMS unit will sit ~65mm from the wall with these mounts which will allow you to fully open the lid.&nbsp;The wall mounting holes are identical to the original version so you can easily upgrade for more support.<h3>Testing</h3>I&#39;ve included a test model so you can quickly print out a low quality piece to ensure the key parts will fit with your AMS unit. The end of the test piece will roughly be flush with the back of the AMS unit. If the test piece doesn&#39;t fit for you please message me so I can update the model.<h3>Assembly</h3>You will need <a target="_blank" href="https://amzn.to/4c2lntZ" rel="nofollow noopener">(6) M4 x 20 cap screws</a> and nuts to attach the shelf piece to the bracket.&nbsp;The holes for mounting the bracket to the wall have a diameter of 6mm with a head diameter of 12mm and a head depth of 2mm. I used some heavy duty drywall anchors from Home Depot to mount mine.<h3>Updates</h3>2024-04-21: Removed the second from last wall in order to fit both 3-slot variants.<h3>Warning: If you print a third party profile you may not be getting the latest version or the highest quality print.</h3><h3>If you like this project, please don&#39;t forget to ❤ Like and ★ Rate!</h3>* Some of the links above are Amazon Affiliate links

AMS Wall Mounts (V2.0) [Fits all AMS versions]

mattiameneguolo

Simply mouse bungee. Tensions the mouse cable so it doesn't get in the way while you work.The satnd is flexible, so it can follow your mouse while you are moving it.&nbsp;NO support needed for printing.Unfortunately, glue is needed for attach the stand to the base

Mouse bungee

mouse bungee

jdalycache

<h2>Summary</h2><h2>A new one piece blade holder has been uploaded. Print on edge with supports. same direction as STL Version # 2 of the Handle has been uploaded. It has slightly rounded edges.</h2>Download at <a target="_blank" href="https://www.printables.com/model/394972-folding-pocket-utility-knife" rel="nofollow noopener">https://www.printables.com/model/394972-folding-pocket-utility-knife</a>This Utility Knife is very strong and easy to print. All you will need is some glue and one small spring. One from a pen will work. Use the stiffest one you can find.<h2>Print Settings</h2>Rafts: Doesn&#39;t Matter Supports: Yes&nbsp;Resolution: 0.2 Infill: 100&nbsp; Filament: <a target="_blank" href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=FilamentOne+PLA" rel="nofollow noopener">FilamentOne PLA</a> Red Glint

Folding Pocket Utility Knife

utility blade

Jorge Rui

<blockquote>This design is free for the benefit of the community, but If you like my designs and want to contribute, you can make a donation to <a target="_blank" href="https://www.buymeacoffee.com/designrepcom" rel="nofollow noopener">buymeacoffee </a>or <a target="_blank" href="https://www.paypal.com/donate/?business=BUM67EMDJRXSN&amp;no_recurring=0&amp;currency_code=EUR" rel="nofollow noopener">paypal, </a>that will be greatly appreciated.&nbsp;For a small help use this affiliate link to buy fillament, it will cost you the same. Thanks !<a target="_blank" href="https://shareasale.com/r.cfm?b=2354730&amp;u=4026304&amp;m=138211&amp;urllink=&amp;afftrack=" rel="nofollow noopener">Filaments used on this project</a><a target="_blank" href="https://shrsl.com/4cpox" rel="nofollow noopener">Complete hotend for the X series</a><a target="_blank" href="https://shrsl.com/4cpoy" rel="nofollow noopener">Hotend with nozzle X series</a><a target="_blank" href="https://shrsl.com/4cpov" rel="nofollow noopener">Other Accessories</a>&nbsp;</blockquote><h2>A note about this model</h2>There is a nes and updated version of this, with a modular approach, based on my <a target="_blank" href="https://makerworld.com/en/models/13415?profileId=13268" rel="nofollow noopener">MMSS</a>, and is available <a target="_blank" href="https://www.printables.com/@jorge_rui" rel="nofollow noopener">here</a>.&nbsp;<figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000012950/design/2023-09-07_37429ce72890f.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000012950/design/2023-09-07_b69a4d08ab4d8.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000012950/design/2023-09-07_8fb4405968195.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000012950/design/2023-09-07_de4c9a7b9700e.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000012950/design/2023-09-07_97413a6c36b6a.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000012950/design/2023-09-07_b12c00384f143.jpg"></figure></td></tr></tbody></table></figure>Nevertheless, this one was my first take on this, and I think it’s nice for you to have something to store your tools and accessories ;)&nbsp;This is a debugged version of the initial release. It presents all the updates and some improvements that have been implemented in the meantime. This version will be updated over time.The entire production sequence was updated in order to translate the comments that were made over time by members. However, you are free to define your own printing strategy. The colored areas are already found as separate objects, therefore it is not necessary to use the painting tool, an exception for the areas where the accessories come reside; in this situation, I chose not to create different bodies, as it is my opinion it would take too long to print, increasing the potential for errors. In this last situation, and if you want, you can simply use the “area painting tool”.<h2>Instructions</h2>ClipsSome examples regarding fits and snapfits. <a target="_blank" href="https://youtu.be/TNyjlRgM0HY" rel="nofollow noopener">(youtube link)</a>&nbsp;Extra material:<ul><li>For the hinges, you will need 2x M4x30 CHC ISO 4762, or a FHC of the same size. If you don&#39;t have that you can print.</li><li>You may want the scrape… you can find it <a target="_blank" href="https://www.printables.com/model/531116-small-scraper-tool" rel="nofollow noopener">here, it is a model that I&#39;ve Remixed</a></li><li>spacer_ silicon_sock.STEP - needed if you have a narrow silicon sock on the hotend (most people will need this)</li></ul><h3>Change Log:</h3><ul><li>(31-08-2023) Revised Latch - More functional<ul><li>Optimizations and various dimensional compensations.</li><li>New 3mf file, which I hope will make the printing process simpler and with a higher success rate.</li></ul></li><li>(29-04-2024) Revised Latch - More functional <ul><li>Optimizations and various dimensional compensations.</li><li>New 3mf file, which I hope will make the printing process simpler and with a higher success rate.</li></ul></li></ul>&nbsp;

Bambu Lab - Tools and Accessories Box

printer organizer

mishkin2

<h2>Summary</h2>Sometimes in the work you have to apply glue or sealant in a certain way and these devices should help to solve the problem.These nozzle spouts are removable and are consumable. You don't need a lot of time and material to print them. But that the glue does not dry in the Neck, close it with a Cap.Nozzle_flat_7mm & guide is provided to apply the adhesive or sealant exactly on the edge, with a certain margin from the edge. The indent can be adjusted by cutting the edge of the guide. However, if you print PLA, keep in mind that this plastic is brittle and a metal file will help you better for cutting.In the video, I tried to show how to apply glue to each of the nozzles.<a target="_blank" href="https://youtu.be/PLhkO27uB4U" rel="nofollow noopener">https://youtu.be/PLhkO27uB4U</a>&nbsp;&nbsp;<h2>Print Settings</h2>Rafts: No Supports: No&nbsp;Resolution: 0,2 Infill: 20&nbsp;

Sealant Gun Nozzles

caulking

3dprintnow

EASY PROCESSYou MUST INSERT THE G CODE:&nbsp;<ol><li>Select the edit button to the right of your printer model to bring up printer settings.</li></ol><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/474105/2023-12-20_cdb75d67e255c.png"></figure>2. Select the “Machine G-code” tab<figure class="image image_resized" style="width:73.57%;"><img src="https://makerworld.bblmw.com/makerworld/draft/474105/2023-12-20_beaed6beeda3a.png"></figure>3. Scroll down to “Layer change G-code.” Now copy and paste this code above the current G-code (DO NOT REMOVE the current G-code, simply copy and paste it above.&nbsp;{if layer_num==0} M104 S190{endif};{if layer_num==28} M104 S195{endif};{if layer_num==53} M104 S200{endif};{if layer_num==78} M104 S205{endif};{if layer_num==103} M104 S210{endif};{if layer_num==128} M104 S215{endif};{if layer_num==153} M104 S220{endif};{if layer_num==178} M104 S225{endif};{if layer_num==203} M104 S230{endif}; &nbsp;<figure class="image image_resized" style="width:70.93%;"><img src="https://makerworld.bblmw.com/makerworld/draft/474105/2023-12-20_50112f027f66b.png"></figure>YOU ARE DONE :) You can slice the file, and select Temperature colour scheme to check if it worked and you will see a rainbow coloured model with different colours for each of the layers

TPU Temperature Tower (temp tower) G Code 

Twotone74

Just another skull cover for a 50mm hitch tow ball. I printed it with glow-in-the-dark-PLA and it looks awesome! &nbsp;I printed it with 0,16mm layer height, tree support, 4 walls and 20% lightning-infill.&nbsp;UPDATE 07.06.2023: Added secured VersionThis version can be secured to protect it from falling off or get stolen. The secure-lock is based on this model:<a href="https://www.printables.com/de/model/98034-hitch-cover-make-your-own-secure-one" rel="nofollow">https://www.printables.com/de/model/98034-hitch-cover-make-your-own-secure-one</a>I had to modify the lock and the key it a little bit, because of the lower jaw of the scull it wouldn't be possible to use the key that comes with the model of @TypQxQYou should print the secured version this way:<figure class="image image_resized" style="width:46.04%;"><img src="https://makerworld.bblmw.com/makerworld/draft/163616/2023-11-12_zuyw4w7rc9uz.png"></figure>&nbsp;