user Jay

Magr099

I have designed an umbrella holder for the trunk.Two hooks are needed that hook into the Isofix holder in the trunk.&nbsp;I have printed them in TPU but it should work in any other material.&nbsp;I think it should work for any car with Isofix points in the trunk.&nbsp;Here is a version with two hooks:<a target="_blank" href="https://makerworld.com/en/models/492223#profileId-405852" rel="nofollow noopener">Umbrella mount Isofix double hook Remixed by Magr099 - MakerWorld</a>

Umbrella mount Isofix

Auto

Wiz_78

This fumes extractor can hold 1 or 2 fans and carbon filters.&nbsp;You'll need:<ul><li>2x 120mm fans (25mm in depth or thinner). Or you can use 80mm ones, printing the optional adaptor plate</li><li>2x 130mm carbon filters (e.g. <a target="_blank" href="https://www.amazon.it/dp/B08V4PKFZT)" rel="nofollow noopener">https://www.amazon.it/dp/B08V4PKFZT)</a></li><li>1x 5.5x2.1mm DC socket</li><li>1x mini SPDT lever switch</li><li>6x M3 inserts</li><li>2x M3x4 screws</li><li>4x M3x12 (or longer) screws</li><li>a 12v DC PSU with a 5.5mm plug</li></ul>

Fumes extractor with 120mm/80mm fans and carbon filters

Projekte

Otasek3D

Panda keyring for every keys. Happy printing! :) Likes, shares and downloads are highly appreciated <3

Panda keychain

Schlüssel...

Elinator

Netzteilhalter für MSI Prestige oder Netzteil maximal: 60mm Breit 30mm hoch

Netzteil Halterung für MSI Prestige LapTop

Computer

Dr.D

<h2>Need a Vase? I got it!</h2><h2>Need a Planter? I got it!</h2>&nbsp;printable in Vasemodedont forget about the ZigZag Vase in the Background Check Out my other Planters, and Models on myMakerworld Page.<a target="_blank" href="https://makerworld.com/en/@Wanja" rel="nofollow noopener">https://makerworld.com/en/@Wanja</a>&nbsp;and follow me for more Design Updates :P&nbsp;<a target="_blank" href="https://makerworld.com/en/models/405427" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000443459/design/2024-03-31_b782ab9b1798c.png"></a><a target="_blank" href="https://makerworld.com/en/models/405427" rel="nofollow noopener">https://makerworld.com/en/models/405427</a>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/403537" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000443459/design/2024-03-31_572fb4c1b41e6.png"></a><a target="_blank" href="https://makerworld.com/en/models/403537" rel="nofollow noopener">https://makerworld.com/en/models/403537</a>&nbsp;If you read this, you will be my ValentinePs. leave a comment if you also saw the tags ;)

Twisted ZigZag Planter (Vasemode)

Pflanzen + Zubehör

GUPrint

Do not change dimension! Stand was made specifically for E27 socket.FILE DOES NOT CONTAIN LITOPHANE - STAND ONLY!

Litophane stand for E27

Lampen

Leif3D

The Ikea Malm drawers are a popular choice for their spacious storage capabilities, yet it&#39;s true that their depth isn&#39;t always fully utilized. That&#39;s why I&#39;ve started to create inserts for them that maximize this space and enhance functionality. This model is part of a series to come that will all be released in my <a target="_blank" href="https://makerworld.com/en/@Leif3D/collections/1169601" rel="nofollow noopener">Ikea Collection</a>. This particular model is an insert that mixes my idea with a 4x3 Gridfinity Layout for the large community of Gridfinity fans out there. In my photo I&#39;ve combined my model with the <a target="_blank" href="https://makerworld.com/en/models/35998#profileId-33745" rel="nofollow noopener">Bins from KYZ</a> in the 2x1x6, 2x2x6 and 3x2x6 size. &nbsp;Boosts are greatly appreciated. They not only help offset the filament costs of test printing such designs and going through multiple iterations until they&#39;re &#39;ready&#39; to share, but they&#39;re also a vote of confidence that inspires us to keep exploring new ideas and pushing the limits of what&#39;s possible with 3D printing. I&#39;m deeply thankful for every single boost and the support it represents. Whether you use them on my models or others&#39; - please utilize them.

Ikea Malm Gridfinity Hanging Organizer

IKEA

kadr

This pokeball was downsized to fit child hands. It serves great as an anti-stress/fidget toy. You can get some minifigures of pokemon to store inside &amp; premiere ball is great for legendary pokemon. Gotta chatch &#39;em all!

Pokeball mini

Für Kinder

Printmajstr

🖼 Lionel .. "Filament Painting"&nbsp;👀Preview:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/765649/2024-03-26_t4bjgg2jh9h0.png"></figure>🔧 Printing Settings: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Please do not change Z size! It will damage model. You can scale a little bit X and Y but let me know if you need other size.&nbsp;🎨 Materials: PLA JakobFIlament Black Transmission Distance: 0.3 PLA 3Dpower Grey Transmission Distance: 2.7 PLA 3Dpower Light Grey Transmission Distance: 0.4 PLA Jamghe White Transmission Distance: 5.2&nbsp;🔄 Filament Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Grey At layer #12 (1.04mm) swap to Light Grey At layer #17 (1.44mm) swap to White for the rest.&nbsp;💖 Support & Sharing: Your support fuels us! If you like this model, don't forget to rate and share it with the community.  Your feedback and creations are invaluable to us. 👍💖!Enjoy :-)&nbsp;

Lionel "Filament Painting"

Bilder

UniDuni3d

I have my notebook on my desk setup, but weekly I need to use it on other places.&nbsp;I cound&#39;t find an easy and fast way to organize the cables down the desk, so I designed this one!&nbsp;Hope it helps you too!

Under Desk Cable organizer! Fast fix/removal

Kabel Halterung

Kingstrzo

M8, M10, M12, M16 socket cap, hex head covers and bosch rexroth leg socket. Recomended use for leg sock to protect floor. Recomended material TPU, 100% infill.

M8, M10, M12, M16 and bosch rexroth socks

Eckverbinder

Athers3d

Theirs quite allot of storage around but I designed these around my specific needs for stackable storage. I wanted something sturdy, to maximise internal storage space but be efficient on filament quantity and print time. What sets this design apart is where I needed the flexiblity to stack and/or easily attach and remove from the wall. I considered hex, but in my case simply sliding on and off more traditional screws works better for my specific usecase.&nbsp;I use three sizes which I&#39;ll simply refer to as small, medium and large. I have also added all 3 models without the wall mounting as, if like me, you may not intend to mount them all, so giving flexibility for printing ones for the wall and ones purely for stacking saving filament and time.&nbsp;Dimensions are:<ul><li>Small storage container: W80 D120 H60</li><li>Medium storage container: W120 H80 D180</li><li>Large storage container: W240 H80 D180</li></ul>Wall mounting holes are 8mm screw head narrowing to 4mm (counter sunk to 6mm on inside)&nbsp;Hope these are of use or inspire your own ideas. Please feel free to leave comments and shout if their is anything specific you&#39;d like to me change or offer in these designs. Thanks!&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;

Wall Mountable Stackable Storage

Behälter

CaesarOfSalads

I designed both this and my straw holder to help clean up the Kitchen Cabinet a little bit. This is designed to hold several of the starbucks style lids (11 and 18mm) in two sizes, along with one 40mm slot that can accomodate a stanley lid.

Plastic Lid Organizer

Küche

PhaseworksCA

I created these shelf parts to make use of some spare 2x4 wood I had lying around from another project. &nbsp;Theyre designed to slide on, but you could also glue them. If there&#39;s any interest I might make versions with closed ends and some screw holes. &nbsp;We use them in a couple of bathrooms around the house to free up space on the counters. :)

2x4 Lumber Shelf Adapter Brackets

Badezimmer

BadBear

原作者为<a target="_blank" href="https://makerworld.com/zh/u/1609920341" rel="nofollow noopener">无明业火_BLAZERS</a>，想传二次创作但是发现作者没有开启，但是又想分享出来，先发出来hhh，如有不合适马上删除~&nbsp;做了一些赛博化的外观配件，对原模型有修改的零件主要为枪主体握柄安装位置。所有安装方法按照原作者的即可。&nbsp;直接点击下载按钮为CyberMT9全部模型，单独下载外观套件点击原始模型文件按钮。&nbsp;原枪MT-9的五金包/零件包在拓竹商城销售，有兴趣的朋友可以去购买。我的是买打印机送盲盒给的。&nbsp;&nbsp;英文部分为微软大模型翻译，请外国友人见谅。The English part is translated by Microsoft’s GPT, if can‘t quite understand, forgive me, friends.&nbsp;The original author is <a target="_blank" href="https://makerworld.com/zh/u/1609920341" rel="nofollow noopener">无明业火_BLAZERS</a>. I wanted to share a secondary creation, but found that the author did not enable it. However, I still wanted to share it, so I posted it first. If it’s inappropriate, I will delete it immediately.&nbsp;Click the download button to download all models, or click the raw model files button to download the mods separately.&nbsp;I made some cybernetic mods for the original model. The main parts modified from the original model are the installation positions of the gun body handle. The installation method can be followed according to the original author.&nbsp;The hardware package is sold in the Bambu Lab store. Friends who are interested can go and buy it. Mine was given as a blind box when I bought the printer.

MT9 MT-9,mods,CyberMT9,Cyber Toy Shooter mods

Spielzeug 

DGs 3D-PRINT

Schraubstock für keine Service arbeitenSchraubstock Klemmbereich von 0-60mmTischhalter Klemmbereich von 12-40mmMit und ohne TischhalterIch Empfehle es in PETG oder ABS, ASA zu Drucken. PLA habe ich nicht Getestet.Ich habe es in PETG von GEEETECH gedruckt im einer Schichthöhe von 0,12mm wegen der Passgenauigkeit der Gewinde.Ich Empfehle es auch mit einer Schichthöhe von 0,12mm zu Drucken.&nbsp;Neu 25.01.2024 Ein Dreibein für den Kleine SchraubstockDas Dreibein kann man einklappen um es leichter zu verstauen.Schraubstock ist mit Dreibein und Tischhalter kompatibelich Empfehle das Oberteil und Unterteil des Mittelteiles zu verkleben ist aber kein Muss.Ich habe das Dreibein in PLA Gedruckt In der STL Liste ist eine Datei mit dem Namen Fuß die Man in TPU aus Drucken kann. Ist aber nicht Erforderlich.Oder was Gummiartiges Ausschneiden und an die Beine Kleben als Antirutschbelag.&nbsp;Neu 05.02.2024Ein neuer Bügel für den Tischhalter mit ein Klemmbereich von 32-60mmDie anderen Teile vom Tischhalter bleiben die gleichen.&nbsp;Die Modelle sind nur für den persönlichen Gebrauch (nicht kommerziell) bestimmt.Geben Sie die Dateien nicht an andere weiter!Für individuelle Designs oder kommerzielle Lizenzen können Sie mich gerne kontaktieren.

Schraubstock

Werkzeug

Stromdratzer

Spulen Beschwerer, Gewicht, Sunlu Filament Rollen Beschwerer für Münzen, Steine, Bleischrot. Man kann z.B. Kleingeld, Münzen aller Art oder andere Sachen wie z.b. Steine, Beton, Blei, Schrauben, Muttern etc alles was gewicht hat einfüllen. In meinen Fall habe ich es mit Kleingeld befüllt. Passend für 1KG Sunlu Rollen. Der Deckel ist verschraubt mit einen M63x1,5 Gewinde &nbsp;Gedruckt mit Sunlu PETG Filament, und einer 0,4er Düse in meinen X1C ohne Stützen. &nbsp;Spools weight, weight, Sunlu filament roll weight for coins, stones, lead shot. For example, you can have small change, coins of all kinds or other things such as: Fill in stones, concrete, lead, screws, nuts etc. anything that has weight.In my case I filled it with change. Suitable for 1KG Sunlu rolls. The lid is screwed with an M63x1.5 thread&nbsp;Printed with Sunlu PETG filament, and a 0.4 nozzle in my X1C without supports.

Spulengewicht Sunlu Rollen Gewicht

Für 3D Drücker

甄大大本甄

<h2>bilibili : 甄大大本甄</h2><h2>QQ群：6699770</h2><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000157134/design/2024-02-07_d9de8ea48f0d2.png"></figure>