Shras

Queeblo

Modified to encase a small retractable tape measurer found here<a target="_blank" href="https://amzn.to/3Sde9LK" rel="nofollow noopener">https://amzn.to/3Sde9LK</a>for sewing and clothing that's flexible. I integrated a button on the side of the skull that can be pressed to trigger the button on the side of the measuring tape.I may upgrade the model to use a bolt and screw to secure the two sides together or change it to be interlocking via puzzle like cutouts in the future as this is far from an elegant solution. But I wanted to avoid glue to be able to retain access to the tape measurer.<h2>3D PRINTING SETTINGS</h2>5-15% infill worked for me on a Bambu Labs P1P, used 5 line brim, tree supports on plate only and a gyroid fill pattern.I believe I resized this correctly, but if it's too tight of a fit, try 102%

Servitor Skull Measuring Tape

warhammer

<h3>For the Sci-Fi lovers! A set of glow in the dark Fallout bookmarks. </h3>&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA <a target="_blank" href="https://kingroon.com/collections/3d-printer-pla-filament?sca_ref=6268797.MtX4KIZPrO" rel="nofollow noopener">Kingroon Black</a> Transmission Distance: 0.4 PLA <a target="_blank" href="https://eryone3d.com/collections/anniversary-sale/products/1-75mm-pla-filament?ref=uqcriwyg" rel="nofollow noopener">EryOne Apple Green</a> Transmission Distance: 3.5 PLA <a target="_blank" href="https://kingroon.com/collections/3d-printer-pla-filament?sca_ref=6268797.MtX4KIZPrO" rel="nofollow noopener">KINGROON WHITE</a> Transmission Distance: 5.5 PLA <a target="_blank" href="https://eryone3d.com/collections/anniversary-sale/products/glow-in-the-dark-pla" rel="nofollow noopener">ERYONE Luminous</a> Transmission Distance: 20 Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Apple Green At layer #14 (1.2mm) swap to WHITE At layer #15 (1.28mm) swap to Glow Green for the rest. - If you do not have Glowing filament keep printing with white ultil the end. If you like my work, drop me a follow!🤜🤛

Fallout Glow in The Dark - Bookmarks Set

modely

Namiiria

<h3>Introduction:</h3>The Imperial A1 Miniature Replicator Toolbox is a standard issue for the maintenance division, designed for efficient and precise materialized servicing. This advanced toolbox includes a dedicated slot for &#34;The Scraper,&#34; an essential tool for cleaning materializer substrates.It features organized compartments for all standard A1 Miniature Replicator tools, including a &#34;PTFE Tube Remover Tool,&#34; and a concealed drawer for emergency essentials.<h3>Credits:</h3>Thanks to these amazing people&#39;s work, I just added cosmetics and re-arranged stuff a bit.@hfoster52 - The toolbox model <a target="_blank" href="https://makerworld.com/en/models/65527#profileId-68895" rel="nofollow noopener">https://makerworld.com/en/models/65527#profileId-68895</a>@jponky - the insert model <a target="_blank" href="https://makerworld.com/en/models/81829?from=search#profileId-87070" rel="nofollow noopener">https://makerworld.com/en/models/81829?from=search#profileId-87070</a><h3>Remix details:</h3><ul><li>Added Star wars themed imperial markings on the box, the front says “ Property of the galactic empire” as well as the back with weird alien-looking letters</li><li>Removed the need for supports on the box, two of the hinges had too much flat overhang.</li><li>Re-arranged the insert layout, removing two hot-ends, adding the scraper slot</li><li>Aligned the two middle grooves and sculpted a pinching point to lift the insert easily</li><li>Dug in the two hotends, oil a bit more, and flipped the H1.5 mm key so all the tool don&#39;t stick out more than 7.5mm on top.</li><li>Designed a hidden drawer to lift the top insert a bit so the gap between the top half of the bof and the insert is 7.5 mm.</li><li>These changes were made to reduce the chance of tools going everywhere in the box if you put it upside down or shake it. Additionally, I tightened a bit of the dimensions on the hotends and keys so they get held a bit better.</li><li>Finally I designed replacement 3D printed pins instead of the screw and bolt hardware because I was too lazy to go byuys some. It does function, but not as well as the metal ones.</li></ul><h3>Printing details:</h3>Layer height: 0.12mmMaterial: Prusa PETG whiteSupports: None&nbsp;Additional models that fit in the toolbox that you might want to print along:&nbsp;The Scraper by @maleko: <a target="_blank" href="https://makerworld.com/en/models/206362?from=search#profileId-226536" rel="nofollow noopener">https://makerworld.com/en/models/206362?from=search#profileId-226536</a>The PTFE Tube Remover tool by @R3DPanda: <a target="_blank" href="https://makerworld.com/en/models/79328#profileId-83766" rel="nofollow noopener">https://makerworld.com/en/models/79328#profileId-83766</a><h3> Assembly instructions:</h3><figure class="media"><oembed url="https://www.youtube.com/watch?v=Uuo6c6lilrw"></oembed></figure>

warhammer

modely

A1 tiskarna