Shine

WIZZY

Hallo! Hier ist eine Replica der AWP Sniper von Counter Strike. Die passgenauigkeit der Teile ist noch nicht ganz geben.Lässt sich aber alles mit ein bisschen Schleifen und Kleben gut umsetzen. Die Druckplatten sind Farblich angeordnet. Mann kann in 2 Farben Drucken oder man Lackiert das Ganze zum Schluss. Ich hoffe man kann sie nach den Fotos zusammen bauen, sonst werde ich noch eine Anleitung Hochladen.Optional kann man bei dem Visier noch 8 Stück M4x10 schrauben einbauen.  Schwarz Sunlu Pla + Grün Geeetech matt olive&nbsp;schaut gerne auch meine anderen modele an&nbsp;-Schalldämpfer hinzugefügt -Dreibein Adapter für besseren halt Hello! Here is a replica of the AWP Sniper from Counter Strike.  The accuracy of fit of the parts is not yet complete.But everything can be implemented easily with a little sanding and gluing. The printing plates are arranged in color. You can print in 2 colors or you can paint the whole thing at the end. I hope you can put them together according to the photos, otherwise I will upload instructions.Optionally, you can install 8 M4x10 screws on the Scope.&nbsp;check out my other models too Black Sunlu Pla+ Green Geeetech matt olive -Silencer add-New Tripod holder for better fit

AWP from CS:GO Counter Strike

mail.iou

Collapsing Katana 袖白雪 (BLEACH -Kuchiki Rukia)This is a telescopic sword inspired by the sword "袖白雪" used by Kuchiki Rukia in the Japanese manga "BLEACH".Updat 2/28/2024 Because the end of the blade is too sharp, some filaments may have different flow characteristics. If after printing, you feel that the end blade is stuck too tightly and cannot be easily retracted, you can apply silicone oil or try to remove the fourth end blade. Reduce the ratio to 0.98, and then print the last blade part. You can also download print profile: "end blade 0.98" directly to print the end blade part. This is a telescopic katana that is printed in parts and then assembled. You can choose to print different colors and strengths for different parts.  The handle is capped to facilitate future maintenance and blade replacement.However, the disadvantage of this is that the printing time will increase.  If you are sure that you can print an all-in-one print, you can refer to my previous telescopic knife work Reverse Blade Sword mini: https://makerworld.com/en/models/114630&nbsp;Notice It is recommended to use PLA+、PETG for printing. If your filament has insufficient strength, please increase the fill overlap to more than 40%.&nbsp;Assembly instructions: 1. Place the blades in order.2. Close the handle cover.<img src="https://makerworld.bblmw.com/makerworld/draft/601737/2024-02-24_6f218b5f4cbbc.png"> 3. Insert two pins to secure.<figure class="table"><table><tbody><tr><td><img src="https://makerworld.bblmw.com/makerworld/draft/601737/2024-02-24_7bd6711ce67e3.png"></td><td><img src="https://makerworld.bblmw.com/makerworld/draft/601737/2024-02-24_ece1f43620c45.png"></td></tr></tbody></table></figure>Remark: 1. If the pin is too loose, you can apply removable glue, such as Styrofoam, to the tip of the latch to facilitate removal during future repairs. 2. Since the flow rate of each brand of filament will vary, the pin may be too thick or too thin. If you encounter this problem, you can adjust the Z height of the pin and print the two pin parts separately. 3. If it is difficult to align the exit hole when the pin is inserted into the tool holder, you can use a blade to push in the direction of the hole to facilitate alignment of the exit hole.<figure class="table"><table><tbody><tr><td><img src="https://makerworld.bblmw.com/makerworld/draft/601737/2024-02-24_383d366365265.png"></td><td><figure class="image image_resized" style="width:100%;"><img src="https://makerworld.bblmw.com/makerworld/draft/601737/2024-02-24_08d21962ae4eb.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/601737/2024-02-24_4f45d2e261b7f.png"></figure></td></tr></tbody></table></figure>

Collapsing Katana 袖白雪 (BLEACH -Kuchiki Rukia)

刀剑

skywolf

the model of <a target="_blank" href="https://makerworld.com/zh/models/429117#profileId-333435" rel="nofollow noopener">https://makerworld.com/zh/models/429117#profileId-333435</a> is not fit with 100mm width paper,so I make a little change，And the back is designed to be flat, which can be directly fixed with traceless glue.&nbsp;100mm width  scale to 108%（default)110mm width scale to 120%&nbsp;原作者模型不适合中国常用的卷纸，中国常用卷纸都是100mm宽度，所以进行了有定的放大，背部改为水平，直接无痕胶固定即可。&nbsp;100mm 宽度  模型放大到108%（默认）110mm 宽度  模型放大到120%<figure class="media"><div data-oembed-url="https://youtu.be/tMjlkW_Jxkg"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/tMjlkW_Jxkg" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Toilet paper Roll Holder For 100mm width paper

家装

星云丿长歌

这是我的世界中的TNT方块模型，顶部导线是凸起的，需要使用红，黑，灰，白四色，并且使用AMS设备。This is a TNT block model in Minecraft. The top wire is raised, red, black, gray, and white are used, and AMS devices are used.

Minecraft TNT

手办

phaeozem

原作的很薄很容易损坏，所以做了个更厚实的，封住了底面避免细碎掉落，并且填补了到机械机构的缝隙避免废料飞出。The original was thin and easily damaged, so a thicker one was made, sealing the bottom to prevent fine pieces from falling, and filling in the gaps to the mechanical mechanism to prevent waste from flying out.&nbsp;这两种配置是两种不同的型号，请注意区别，一个入口有斜面，一个没有。The 2 configurations are 2 different models Please note the distinction, one entrance has a bevel, one does not.&nbsp;更新一个新配置（2024/2/1）优化入口处，变成斜面，降低为2层墙，15%填充，可以更快的打印optimize the entrance，modified to bevel，2 walls, 15% infill，faster printing

Gun

刀剑

家装

手办

配件