user_1341333739

SThane

After printing a couple other models that didn't seal properly, I decided to pick a well-designed model and make a few changes to seal it as much as possible. There are now three versions of the tray:<ol><li>The first version can be printed face-up, and does not include the logo.</li><li>The second version is multi-color, and meant to be printed face-down, to maximize quality and minimize filament swaps.</li><li>NEW! - The third version addresses the most common feedback - make it stronger, and make it work with the original AMS Lids</li></ol>For the first two, I've reinforced the desiccant opening, provided an improved snap-fit lid with a tab to indicate the proper orientation, updated the funnel adapter to fit into the container better, added the funnel, and added brims to the two funnel parts. The funnel can also be use with this <a target="_blank" href="https://makerworld.com/en/models/28349#profileId-24748" rel="nofollow noopener">AMS Desiccant Pod</a>. &nbsp;For the third design, I've made the desiccant tray shorter, and inset the lid, to make it flush, and so it can be concealed behind the original AMS lid. I've also made the desiccant openings deeper, so that the top is much sturdier.&nbsp;Note: See the attached photos for the best way to insert the lid. If you insert the left or right side first, then press the other side, you risk breaking the model. Please insert the edge closest to the logo first, then push the tab back towards the other tab. It may be a bit snug, but if you insert it at a slight angle the first time, you can then easily slide it into place.

Sealed AMS Rear Desiccant Tray

3D Printer Accessories

FilliFuu

UPDATED / FIXED VERSION FOR PEOPLE WITH PRINT PROBLEMS, ALL FILES AND DESCRIPTION NOW UPDATED 12/02/24Basic profile containing over 9 sizes, new improved links and lock, easy to print with no bridges in the links.&nbsp;This is the standard, non dragon or unicorn bracelets, completely new and improved, with new facial designs, link design and lock design, optimized for silk and strength so print in any colour you wish.&nbsp;Any issues or you wish to learn more then please don't hesitate to ask.&nbsp;To use the link, click in 5 times to soften the joint before attaching to the wrist in order to understand how the bracelet holds.&nbsp;Dragon & Unicorn available on my patreon, link on my profile page.&nbsp;<h2>3D PRINTING SETTINGS</h2>0.3 wallDetect thin walls on 0.2 layer height no brim (unless poor adhesion} no supports gyroid infill 25% 3 walls everything else as standard

Basic Flexi Silk Bracelets  - Updated

Gifts

lindnjoe

I had a request for the mario mushroom container and saw that it didn't have commercial rights, so I recreated it. Enjoy! It prints on a single ams with 4 colors.

3D Printer Accessories

Gifts

Convention