看看好不

EyeSukAtGamz

Originally from <a target="_blank" href="https://www.printables.com/model/282832-modular-tape-storage" rel="nofollow noopener">https://www.printables.com/model/282832-modular-tape-storage</a>.&nbsp;Printed on a Bambu Lab X1 Carbon in Basic PLA, 0.28mm Extra Draft layer height / quality and everything went together perfectly.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/511669/2024-02-08_81e2c17d3bd5e.gif"></figure>I used to store my tape on a dowel, but I had to remove all of the rolls if I wanted to use one on the back of the dowel. This model stores tape rolls on hanging arms that can swing out for easy (one handed) access.&nbsp;You'll need to print a few parts:&nbsp;Dowels and hangers: Select the right size dowel and hangers, along with the end cap. The dowel is modular, so you can always add on more pieces to extend it. If you need other size dowels or hangers, please let me know.&nbsp;Base plate and pegs: There are currently files for Ikea Skadis pegboards, 1in x 1in pegboards, as well as the ‘<a target="_blank" href="https://www.printables.com/model/152592-honeycomb-storage-wall/remixes" rel="nofollow noopener">Honeycomb storage wall</a>’ by @<a target="_blank" href="https://www.printables.com/social/84389-rostap/about" rel="nofollow noopener">RostaP</a>. The pegs are printed separately, then clipped onto the base plate. There are arrows to help orient the pegs in the correct direction. The honeycomb base plate has the legs already integrated into the base plate (no separate pegs).&nbsp;There's also a non-pegboard base that can be attached to a wall with screws.&nbsp;Tolerances are .2mm, so I recommend calibrating your E-steps and flow rate before printing these parts.&nbsp;How to calibrate E-steps: https://all3dp.com/2/extruder-calibration-6-easy-steps-2/&nbsp;How to calibrate flow rate: https://www.printables.com/model/81314-flow-calibration-cube<h4>Print settings</h4>All parts print with no supports. Connectors have only been tested with PLA. Softer, more compliant filaments may not snap together securely. There are test connectors in files if you want to see what works.&nbsp;Pegs: .12mm layer height, .44mm layer width, and 10 walls (so they print solid). No supports required.&nbsp;All other files: No special settings required. Recommend at least 3 walls. No supports required.<h4>Assembly</h4>When clipping in the pegs, make sure the arrows/triangles on the pegs point in the same direction as the arrows on the base plate. You may need to get them in 70% of the way, then press the plate flat on a table to get them to ‘pop’ in. Also, the clips tend to develop blobs/zits all around. Be sure to clean those up with a razor blade: If you don't, the clips won't fit properly.&nbsp;<h4>Updates</h4><ul><li>9/18/2023 - Added STEP files for the annular/dowel connector, as well as the peg socket and clip. Feel free to use these in other designs!</li><li>9/18/2023 - Added base plate for 25mm spacing (not 1 inch/25.4mm): The 1 inch spacing was a little too wide for some users</li><li>10/3/2022 - Added base plate for the ‘Honeycomb Storage Wall’ by @RostaP</li><li>9/30/2022 - Added 5mm spacers for the dowel hangers.</li><li>9/29/2022 - Added 4.5mm, 5mm, and 6mm straight pegs</li><li>9/28/2022 - Added 3.9mm peg for 3.2mm thick (1" x 1") pegboards</li><li>9/27/2022 - Added ¼" pegs for 3/16" thick (1” x 1”) pegboards</li></ul>

Modular Tape Storage

Gr3dstampaidee

i have different tools (scissors, wrench, caliper, ecc..) piled in my drawerno supporteasy print&nbsp;accessories add<ul><li><a target="_blank" href="https://makerworld.com/en/models/141937#profileId-154516" rel="nofollow noopener">IKEA SKADIS TRAY by Gr3dstampaidee - MakerWorld</a></li><li><a target="_blank" href="https://makerworld.com/en/models/151801#profileId-165723" rel="nofollow noopener">IKEA SKADIS SCREWDRIVER by Gr3dstampaidee - MakerWorld</a></li><li><a target="_blank" href="https://makerworld.com/en/models/169213#profileId-185817" rel="nofollow noopener">IKEA SKADIS SCRAPER BAMBU LAB PEGBOARD by Gr3dstampaidee - MakerWorld</a></li></ul>

IKEA SKADIS TOOL HOLDER

IKEA

Andows

Gridfinity storage solution support for the <a target="_blank" href="https://makerworld.com/en/models/118918#profileId-127935" rel="nofollow noopener">AMS Stand</a>. Compatible with the longer drawers of the remixed version, and with <a target="_blank" href="https://makerworld.com/en/models/75221#profileId-90851" rel="nofollow noopener">the original</a>!&nbsp;Print profiles are provided for:<ul><li>Long drawers integrated with Gridfinity. Use these in case you haven't yet printed the drawers, or in case you want to replace the <a target="_blank" href="https://makerworld.com/en/models/75221#profileId-90851" rel="nofollow noopener">original </a>smaller drawers by longer drawers with Gridfinity support! Long rails rails and logos already included in the <a target="_blank" href="https://makerworld.com/en/models/118918#profileId-127935" rel="nofollow noopener">AMS Stand Remix</a>, but also in here for the sake of convenience.</li><li>Baseplate for the drawers. Print these in case you have already printed the longer drawers from the <a target="_blank" href="https://makerworld.com/en/models/118918#profileId-127935" rel="nofollow noopener">AMS Stand Remix</a> or <a target="_blank" href="https://makerworld.com/en/models/75221#profileId-90851" rel="nofollow noopener">the original</a> and want to add Gridfinity support. The first plate is for the longer drawers and second is for the original drawers.</li><li>Gridfinity bins. Assortment of Gridfinity bins/boxes, I have personally tested and which work great with these drawers. Various other compatible designs also floating around the internet. Check for example <a target="_blank" href="https://gridfinity.xyz/" rel="nofollow noopener">here</a> or <a target="_blank" href="https://thangs.com/category/Gridfinity?sort=likes&explore=true&range=year" rel="nofollow noopener">here</a>.</li></ul>In case of the print profile with the Gridfinity boxes, it's not the intention that one would print all of the included plates, but instead select those boxes/bins which suit one's individual storage needs. The included boxes are those which I have printed thus far. Most of the boxes are straight from the <a target="_blank" href="https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%20Divider%20Bins-60721" rel="nofollow noopener">initial Gridfinity release</a> by <a target="_blank" href="https://thangs.com/designer/ZackFreedman" rel="nofollow noopener">Zack Freedman</a>, but a couple of them are my own design. I utilized the <a target="_blank" href="https://www.printables.com/model/274917-gridfinity-rebuilt-in-openscad" rel="nofollow noopener">Gridfinity Rebuilt</a> tools and some manual work to create some additional boxes which were not yet provided by Zack. The additional boxes include, among others, the half-sized boxes for the front of the drawers.&nbsp;The drawers and rails have internal holes and pauses for inserting 10x1mm disk magnets. Feel free to utilize or ignore them. Check the <a target="_blank" href="https://makerworld.com/en/models/118918#profileId-127935" rel="nofollow noopener">AMS Stand Remix</a> for further details regarding those.&nbsp;The “40mm” drawers with the separate baseplates are just barely able to support 6U Gridfinity boxes (height 45,80mm), but I would recommend going with a maximum of 5U box height. The “40mm” drawers with the integrated Gridfinity support have a bit more room and are able to fit 6U boxes nicely.The “30mm” drawers can only support 3U Gridfinity boxes (height 24,80mm), so probably best to leave those for some other use.

Gridfinity for AMS Stand drawers

收纳

Ukdavewood

This model required 23 plates to and 11 colours print and over 60 hrs printing time.A half size, simpler Single Colour 1:1000 scale version that fits on one X1/P1 plate and prints without supports is now available - and it is recommended that people look at that first before attempting this model.<a target="_blank" href="https://makerworld.com/en/models/13483?profileId=13242" rel="nofollow noopener">https://makerworld.com/en/models/13483?profileId=13242</a>&nbsp;Also, before printing this 23 plate version it is recommended you look at the smaller single A1mini plate size 4 colour version of Ventura's sister ship Azura here<a target="_blank" href="https://makerworld.com/en/models/54956#profileId-56518" rel="nofollow noopener">https://makerworld.com/en/models/54956#profileId-56518</a> <img src="https://makerworld.bblmw.com/makerworld/draft/146611/2023-11-05_f6299d4375f028.jpeg">&nbsp;&nbsp;Scale Model of P&O Cruises Ventura - for personal use only.Designed for multi colour printing on a Bambu Lab X1C or P1P with 8 Colours (2 x AMS).Designed using Fusion 360 - see video for details&nbsp;<a target="_blank" href="https://youtu.be/5GevDdOS9MU" rel="nofollow noopener">https://youtu.be/5GevDdOS9MU</a>&nbsp;Further background details about the design and printing history are available at this forum thread.<a target="_blank" href="https://forum.bambulab.com/t/cruise-ship-print" rel="nofollow noopener">https://forum.bambulab.com/t/cruise-ship-print</a>&nbsp;With some compromises on colours could probably print with one 4 colour AMS.Model is appx 250% the size of the build place - so each deck is split into sections that need to be printed separately.&nbsp;The model consists of over 400 STL files - so has been published as Bambu Studio plate level 3mf files. &nbsp;The model is designed for each deck to be printed separately in order to minimise support requirements.&nbsp;Deck sections are then joined together using dovetail joints and then each deck is bolted together using M4 Cap Head Bolts.&nbsp;Printing the model requires 21 separate 30min to 9.5 hour prints - so a total of approximately 50 hrs on a BLX1C which in my case was spread over 2 weeks.&nbsp;NB/ A smaller 1:1000 version of this ship is available which prints as one - so it is recommended that one is tried first before attempting this print.&nbsp;For the lower decks and Hull I designed it some small tabs that need to be shaved off to square off the external corners and hide the joins as much as possible.&nbsp;Also in this version of the model the radar tower on deck 18 at the front of the ships needs to be printed in separate sections and superglued together to avoid messy supports.&nbsp;A similar model of Ventura's sister ship Azura is available too which I will publish once I have received feedback on the method of publishing this ship.&nbsp;This is a personal project. I have no connection to P&O Cruises or Carnival Corporation other than being a customer.&nbsp;This version is released under a CC Non Commercial No Derivatives license due the P&O Cruises branding. &nbsp;For reference here are the filament colours I have been using in order of quantity - with a best guess at Bambu Lab equivalentseSUN PLA+ Filament 1.75mm, PLA Plus 3D Printer Filament Cold White eSUN PLA+ Silver SunLU PLA+ Blue SunLU PLA Red 1kg 1.75mm PLA 3D printer filament Printer - With coil (Gold Color) SUNLU 3D Printer Filament PLA+ Plus Grass Green Aldi Balco Blue 1kg SunLU PLA Yellow Bambu Lab Orange ICE Filaments ICEFIL1PLA104 PLA filament, 1.75mm, 0.75 kg, Barbaric Brown eSUN PLA BLACK With the quantity of white being about 10x the rest.&nbsp;My best guess at equivalent Bambu Lab Filaments to these would be:Bambu Lab PLA Basic Jade White Bambu Lab PLA Silk Silver Bambu Lab PLA Basic Blue Bambu Lab PLA Basic Red Bambu Lab PLA Basic Bronze Bambu Lab PLA Basic Green Bambu Lab PLA Matt Ice Blue Bambu Lab PLA Basic Yellow Bambu Lab PLA Basic Orange Bambu Lab PLA Basic Brown Bambu Lab PLA Basic Black &nbsp;&nbsp;&nbsp;

P&O Cruises Ventura 1:500 Cruise Ship

玩具

Rilot Designs

This is similar to other tools available but I wanted to create my own. It's in use daily.Everything should print without supportsTo complete you will need:3 x Idlers6 x V rollers1 x 2040 V-slot extrusionM5 boltsGT2 beltWeights (I use 608zz bearings)&nbsp;I've included STEP files so you can customise to your liking

Heat set insert installation tool

tool

AP Engineering

Remixes Available for other Food Dehydrators:<ul><li>Silvercrest 350W / Quigg 350W Food Dehydrator: <a target="_blank" href="https://makerworld.com/en/models/14105" rel="nofollow noopener">https://makerworld.com/en/models/14105</a></li><li>MisterChef® Professional Food Dehydrator, 250W: <a target="_blank" href="https://www.printables.com/model/499723-2-spool-dryer-base-for-us-model" rel="nofollow noopener">https://www.printables.com/model/499723-2-spool-dryer-base-for-us-model</a></li></ul>16/05/2023: Added Assembly manual to support assembly._________________________________________________________________________________________________________I was using a generic food dehydrator as a filament dryer (Muhler DHY-500T). It was not very handy to use to dry filament because the spool sits its side, and was weird to put it in and out and I could only dry one spool at a time, which was not very energy efficient. So I took out the electronics from the dehydrator and designed a box from scratch.&nbsp;This is a fully functional 2 spool food dehydrator with a 250W motor (in my case it's 250W, but there are food dehydrators ranging from 150W to 450W). As expected, please use PETG or above (ABS, ASA, etc) to print all the parts since the temperatures should be above 50degC. For the feet you can print in PLA, but I advise in TPU for a nicer feeling. I also included in the rear a nice power cord lock, so even if you pull it up strong it won't rip anything. The lid on the top opens with two hinges in the back, for this M4 Screw and Heated brass inserts is needed, but if you don't have brass inserts you should be fine just with a long M4 bolt and a M4 nut.&nbsp;I included the STEP file in case the electronics of your food dehydrator doesn't fit on those holes you can easily modify it to fit your electronics.&nbsp;This filament dryer is compatible with filament spools as big as 21.5cm (exterior diameter) & 8.5cm (thickness)! So should be compatible with any filament spool available. There's also plenty of space to put some silica bags to keep the humidity down.&nbsp;BOM: Mandatory:<ul><li>Food dehydrator (should be quite generic) - You can buy these used from 5$ to 15$ max</li><li>4x Bearings 608 (608 / 608rs / 608zz, etc…)</li><li>Round Cheap Hygrometer - 2$ for a pair (Search AliExpress “Mini hygrometer”)</li><li>2x Heated Brass Insert M4 (any lenght) and 2x M4 bolts (any lenght above 10mm) OR 2x M4x25mm bolts + 2x M4 nuts - For the hinges</li><li>2x PTFE Tube (to feed filament out of the dryer)</li><li>2x zip ties (to lock the PTFE tube)</li><li>Self tapping screws to lock the electronics in place, to lock the power cord.</li></ul>Optional:<ul><li>5mm heating insulation pad to cover the whole inside walls and increase the heating capabilities and efficiency.</li></ul>If you enjoy it, consider tipping (any amount, even 0.05$ is appreciated) to my Paypal (affp_93@hotmail.com) to keep funding more nice projects like this. Even if you don't feel like donating, putting a like and dropping a appreciation comment goes a long way to support it!

HWS

IKEA

收纳

玩具

tool

Bambu