user_1220980788

TheKroete

Needed a Movement Tray for my Gretchins and its Runtherd :D

Gretchin with Runtherd Movement Tray 10 x 25mm + 1 x 32mm Bases

战锤

Rosencrans.angelo

i found this model on line patched it up a bit sliced it into bambu and worked out all your bugsbig shout out to LILYKILL at Cults

Fallout T45 Helmet (wearable)

辐射系列

FlorinV

Please share your make and let me know your opinion about this model. Thank you and have a great week !&nbsp;Update 11.03.2024: Added “Skull" lid. There is an optional profile for printing this lid. <a target="_blank" href="https://makerworld.com/en/@timon1201" rel="nofollow noopener">@timon1201</a> did a similar lid and gave me this idea. thanks !&nbsp;Update 29.12.2023: Added “Pine cone” lid. You can find it in the Optional Lids profile. The lid has fine details, please be sure your printing plate is clean (no finger grease etc.).&nbsp;The Automatic Toothpick dispenser:<ul><li>All parts are 3d printed, all in one plate. No AMS needed.</li><li>Several Lids to choose from and a clean lid to customize it as you wish. “Voronoi” and “Yoda” lid are found in the model profile. Other optional lids will be added to the “Optional Lids” profile.</li><li>Each part easily fit together. Please check the short building video bellow. ( 1min 30sec minutes to build )</li><li>works with toothpicks of max 66mm and approx. 2mm diameter (normal toothpicks I've found ). Please shake the dispenser to arrange the toothpicks correctly and parallel. Throw away toothpicks that look too different than normal ones: damaged, askew.</li><li>The two arms that hold the big parts together have printed on them L and R, to be sure you set them correctly (left and right).</li><li>The 3d printed spring should be inserted like in the video, first on the back with the other end up, then the front.</li></ul><figure class="image image_resized" style="width:30.4%;"><img src="https://makerworld.bblmw.com/makerworld/draft/682841/2023-12-14_9977d673e0c9a.png"></figure><ul><li>Second spring is optional (the left one). After some use, it will work smoother, as the parts needs some time to slide easier one on each other. From my experience, the right spring is enough, but feel free to play around.</li><li>If some of the toothpicks are thrown, it means some of them are a bit too thin. You can dispense them better by releasing the push pad slower. :)</li><li>If at some moment it stops from giving toothpicks, it can happen that the feeding zone is blocked by two toothpicks (usually because some toothpicks are smaller/bigger, damaged, askew etc). It's easily fixed by shaking a bit the whole model and/or press harder on the push part.</li><li>The parts are finely designed to work together, so I suppose it's important to have a good filament and calibrated. Please use my tested profile.</li><li>You can choose from two different lids (in the main profile, more lids in a separate profile - Optional Lids). The “Yoda” lid is a separate plate as it's using AMS and 2 colors.  You can print it without AMS and leave empty space in the lid where letters and Yoda is (don't print the letters and Yoda).</li><li>I've added another profile (For Thinner Toothpick - only base part) containing only the base part for cases where your toothpicks are often flying out of the dispenser. This is usually a problem related too thin toothpicks. This part is only the base part which should handle such toothpicks.</li><li>Based on the review of eric.joschko (thank you!!), he scaled everything to 108% and everything works perfect for he's toothpicks which i understood they are 68mm length.</li><li>Based on review of Sven_fretz (thank you!!): “scaled everything up to 125% and it works fine with my 80mm toothpicks.”</li><li>For better spring action and to be sure they keep their power better in time, you can print only the springs with PETG.</li></ul>This is the building video (1min 30sec minutes ): <a target="_blank" href="https://youtu.be/BJucPYljE2o" rel="nofollow noopener">https://youtu.be/BJucPYljE2o</a><figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=BJucPYljE2o"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/BJucPYljE2o" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;If you like this model, please check out my new Salt & Pepper dispensers: <a target="_blank" href="https://makerworld.com/en/models/228050#profileId-245632" rel="nofollow noopener">https://makerworld.com/en/models/228050#profileId-245632</a><figure class="image image_resized" style="width:56.68%;"><img src="https://makerworld.bblmw.com/makerworld/draft/682841/2024-03-06_0e2805d6f36fc.jpg"></figure>&nbsp;Or, my fun and easy to print, easy to use filament cutter: <a target="_blank" href="https://makerworld.com/en/models/137257#profileId-149353" rel="nofollow noopener">https://makerworld.com/en/models/137257#profileId-149353</a><figure class="image"><a href="https://makerworld.com/en/models/137257#profileId-149353" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/682841/2024-01-15_0a30aa152023c.png"></a></figure>&nbsp;Disclaimer: YOU ACKNOWLEDGE, BY YOUR USE OF MY MODELS, THAT YOUR USE OF THE MODELS IS AT YOUR SOLE RISK.<h2>LIMITATION OF LIABILITY</h2>UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL OR EQUITABLE THEORY, SHALL THE DESIGNER OF THE MODELS BE LIABLE TO YOU OR TO ANY OTHER PERSON FOR ANY INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL LOSSES OR DAMAGES OF ANY NATURE ARISING OUT OF OR IN CONNECTION WITH THE USE OF OR INABILITY TO USE THE MODELS OR 3D PRINTED MODELS.

Toothpick Dispenser - all parts printed

工具

BODY3D

As you liked my waste eater : <a target="_blank" href="https://makerworld.com/en/models/92332" rel="nofollow noopener">https://makerworld.com/en/models/92332</a>I had the idea of creating another one but this time with Kirby !<figure class="media"><div data-oembed-url="https://www.youtube.com/shorts/vaVUMW5bYIc"><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=vaVUMW5bYIc"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://www.youtube.com/embed/vaVUMW5bYIc" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>Since he eats everything, I thought it would be perfect :) It will make a very good waste eater for your A1 or A1 Mini or as a candy container or something else ^^ Very simple to print, no supports required. In total 6 colors, Pink, Dark Pink, Red, Blue, White and Black. And only 1 multicolor print for the eyes :) I hope you enjoy !&nbsp;Happy Printing !&nbsp;All my links : <a target="_blank" href="https://beacons.ai/body3d" rel="nofollow noopener">https://beacons.ai/body3d</a>

Kirby Waste Eater

打印机

JayRay

This is the original #3DBenchy directly from Creative Tools. Not a download of a download, nor all the slightly modified versions found elsewhere (ie, BambuLab Studio, Printables, etc…)&nbsp;I would like to introduce the #3DBenchy to Maker World. During the close beta period, there was no #3DBenchy available to send to the printer from the phone app so I uploaded it here. &nbsp;Please add your profiles as you see fit for the community to use to run tests. Thanks!&nbsp;Community members have provided a ton of different profiles. I hope you find one that fits your testing needs. Remember, a bad Benchy print could mean your filament calibrations are off, or a sign of mechanical error (for Bambu Printers.)&nbsp;All models uploaded and the below content is extracted from 3Dbenchy.com.<figure class="media"><div data-oembed-url="https://youtu.be/_epwuDI9FBI"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/_epwuDI9FBI" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;<figure class="image"><a href="http://www.3dbenchy.com/features/" target="_blank" rel="nofollow noopener"><img src="http://www.3dbenchy.com/wp-content/uploads/2015/04/3DBenchy__Low-slope_surfaces_1-300x300.png"></a></figure>#3DBenchy is designed to offer a large array of challenging geometrical features for 3D printers, and touch on different issues related to additive manufacturing.The 3D model is designed to print at 1:1 scale without support materials. It is challenging for most 3D printers but the small volume (15.55 cm3) typically prints in well under two hours and does not require much material.The different surfaces of the #3DBenchy model reveal typical issues regarding surface finish, model accuracy, warping, etc.Visit <a target="_blank" href="http://www.3dbenchy.com/sample-page/features/" rel="nofollow noopener">this link</a> to see a complete list of each feature and correspondent descriptions.<figure class="image"><a href="http://www.3dbenchy.com/dimensions/" target="_blank" rel="nofollow noopener"><img src="http://www.3dbenchy.com/wp-content/uploads/2015/04/3DBenchy_about_features-300x287.png"></a></figure>Use #3DBenchy to test and calibrate your 3D printer by adjusting hardware and software settings for optimal results.The shape and size of this 3D model is designed to challenge 3D printers. Compare your #3DBenchy results with the dimensions illustrated in <a target="_blank" href="http://www.3dbenchy.com/dimensions/" rel="nofollow noopener">this link</a>. These are easy to measure with a caliper.Print and check your 3D-printer’s result for dimensional accuracy, tolerances, warping and deviations related to changes in printing parameters and material types.&nbsp;<h2>Features</h2><figure class="image"><img src="http://www.3dbenchy.com/wp-content/uploads/2015/04/3DBenchy_page_features_main_image.png"></figure>#3DBenchy is designed to offer a large array of challenging geometrical features for 3D printers, and touch on different issues related to additive manufacturing.The 3D model is designed to print at 1:1 scale without support materials. It is challenging for most 3D printers but the small volume (15.55 cm3) typically prints in well under two hours and does not require much material.The different surfaces of the #3DBenchy model reveal typical issues regarding surface finish, model accuracy, warping, etc.Please see a complete list of each feature and correspondent descriptions below.&nbsp;<h2>The Hull</h2>The hull is a large, smooth overhanging curved surface that is challenging to 3D-print, and clearly reveals any surface deviations.&nbsp;<figure class="image"><img src="http://www.3dbenchy.com/wp-content/uploads/2015/04/Feature_hull_curved_overhang-300x300.png" alt="Feature_hull_curved_overhang"></figure>&nbsp;<h2>Symmetry</h2>#3DBenchy is perfectly symmetrical which makes any skewness and warping easy to detect.&nbsp;<figure class="image"><img src="http://www.3dbenchy.com/wp-content/uploads/2015/04/Feature_symmetry-300x300.png" alt="Feature_symmetry"></figure>&nbsp;<h2>High-Resolution STL file</h2>The STL file is triangulated at a very high resolution which yields smooth surfaces. The maximum deviation from the original CAD file is set to 0.001 mm.&nbsp;<figure class="image"><img src="http://www.3dbenchy.com/wp-content/uploads/2015/04/Feature_high-res_stl_mesh-300x300.png" alt="Feature_high-res_stl_mesh"></figure>&nbsp;<h2>Planar Horizontal Faces</h2>The top surfaces of the deck, box and chimney are planar, horizontal and parallel to the bottom plane.&nbsp;<figure class="image"><img src="http://www.3dbenchy.com/wp-content/uploads/2015/04/Feature_planar_horizontal_faces-300x300.png" alt="Feature_planar_horizontal_faces"></figure>&nbsp;<h2>Tiny Surface Details</h2>If you have a high-resolution 3D printer, this is where you can shine! The letters on the stern are less than 2 mm tall and the thickness of #3DBenchy’s nameplate is just 0.1 mm.&nbsp;<figure class="image"><img src="http://www.3dbenchy.com/wp-content/uploads/2015/04/Feature_3DBenchy_nameplate_tiny_detail-300x300.png"></figure>&nbsp;<h2>Cylindrical Shapes</h2>The chimney is designed to define concentrical cylindrical shapes with inner and outer diameters. These clearly show deviations in roundness.&nbsp;<figure class="image"><img src="http://www.3dbenchy.com/wp-content/uploads/2015/04/Feature_conentrical_cylindrical_shapes-300x300.png" alt="Feature_conentrical_cylindrical_shapes"></figure>&nbsp;<h2>Overhang Surfaces</h2>Overhang issues are the Achilles’ heel of 3D printing. #3DBenchy offers several challenging areas such as in the difficult-to-reach inside of the bridge.&nbsp;<figure class="image"><img src="http://www.3dbenchy.com/wp-content/uploads/2015/04/Feature_overhang_bridge-300x300.png" alt="Feature_overhang_bridge"></figure>&nbsp;<h2>Low-Slope-Surfaces</h2>Low-slope-surfaces clearly show the layered structure of 3D printing. If printed horizontally, #3DBenchy’s gunwale and roof of the bridge will reveal the layer-steps.&nbsp;<figure class="image"><img src="http://www.3dbenchy.com/wp-content/uploads/2015/04/Feature_low-slope-surfaces-300x300.png" alt="Feature_low-slope-surfaces"></figure><h2>Large Horizontal Holes</h2>The rear window offers a large circular horizontal hole and the boat’s wheel offers a round difficult-to-reach secluded feature.&nbsp;<figure class="image"><img src="http://www.3dbenchy.com/wp-content/uploads/2015/04/Feature_large_horizontal_hole-300x300.png" alt="Feature_large_horizontal_hole"></figure>&nbsp;<h2>Small Horizontal Holes</h2>The hawsepipe represents a small short horizontal hole and has a very thin flange against the hull.&nbsp;<figure class="image"><img src="http://www.3dbenchy.com/wp-content/uploads/2015/04/Feature_hawsepipe_small_hole-300x300.png" alt="Feature_hawsepipe_small_hole"></figure>&nbsp;<h2>Slanted Small Holes</h2>The fishing-rod-holder provides a very small slightly-slanted blind hole.&nbsp;<figure class="image"><img src="http://www.3dbenchy.com/wp-content/uploads/2015/04/Feature_fishing-rod-holder_slanted_small_hole-300x300.png" alt="Feature_fishing-rod-holder_slanted_small_hole"></figure>&nbsp;<h2>First-Layer-Details</h2>The shallow letters at the bottom of the boat clearly reveal typical first-layer-squashing.&nbsp;<figure class="image"><img src="http://www.3dbenchy.com/wp-content/uploads/2015/04/Feature_shallow_letters_bottom_plate-300x300.png" alt="Feature_shallow_letters_bottom_plate"></figure><h2> License</h2><figure class="image"><a href="http://www.3dbenchy.com/wp-content/uploads/2015/04/3DBenchy_frontpage_slider_sea_v041.jpg" target="_blank" rel="nofollow noopener"><img src="http://www.3dbenchy.com/wp-content/uploads/2015/04/3DBenchy_frontpage_slider_sea_v041-1024x402.jpg"></a></figure>&nbsp;#3DBenchy by <a target="_blank" href="http://creative-tools.com/" rel="nofollow noopener">Creative-Tools.com</a> is licensed under a <a target="_blank" href="http://creativecommons.org/licenses/by-nd/4.0/" rel="nofollow noopener">Creative Commons Attribution-NoDerivatives 4.0 International License</a>. Permissions beyond the scope and typical usage examples are explained below.&nbsp;<h2>Feel free to …</h2><ol><li>… download the <a target="_blank" href="http://www.3dbenchy.com/download/" rel="nofollow noopener">#3DBenchy STL file</a> and 3D-print it as you please.</li><li>… give away and even sell 3D-prints of the <a target="_blank" href="http://www.3dbenchy.com/download/" rel="nofollow noopener">#3DBenchy STL file</a>.</li><li>… <a target="_blank" href="http://www.3dbenchy.com/share/" rel="nofollow noopener">publish</a> images and videos of your 3D-prints – you own them!</li><li>… redistribute the unmodified <a target="_blank" href="http://www.3dbenchy.com/download/" rel="nofollow noopener">#3DBenchy STL file</a> as you please. Such as hosting your own downloads, attaching to emails, including the file on DVDs, USB-sticks, and in software distributions, bundling the STL or pre-sliced print file with 3D printer kits, etc.</li><li>… experiment, be inventive and creative! We made #3DBenchy as a tool for playing around with and testing 3D printers. Improve your skills and challenge your machine and its software. Try every setting, variation and material you can think of!</li><li>… modify #3DBenchy for personal use. Feel free to publish texts, images and videos of your experimentation (these are your work and you own them!). Please respect the above list items regarding not distributing modified STL files of #3DBenchy.</li></ol><h2>Consistency</h2>#3DBenchy is designed to be a calibration tool for testing 3D print settings and comparing the performance of different 3D printers. Therefore it is important that the same unmodified <a target="_blank" href="http://www.3dbenchy.com/download/" rel="nofollow noopener">STL</a> file is consistently used for this purpose.<h2>Attribution</h2>We designed the little #3DBenchy boat and this expanding web page to help 3D printer operators on this planet to better navigate the vast sea of 3D printing possibilities!It is also meant to be a fun object to experiment with and discover 3D printing. If you enjoy #3DBenchy and the content on this site, please give us attribution in your publishings. Simply include the word <a target="_blank" href="https://www.google.se/webhp?sourceid=chrome-instant&ion=1&espv=2&ie=UTF-8#q=%233dbenchy" rel="nofollow noopener">#3DBenchy</a> and the URL <a target="_blank" href="http://3dbenchy.com/" rel="nofollow noopener">3DBenchy.com</a>. The team behind #3DBenchy highly appreciates your help!

BENCHY

基础模型

魂直大叔

作为一个超级机器人大战的狂热爱好者，很遗憾很多机体都没有模型实体化，借由fdm3d打印技术，将自己设计的各机体图纸分享给大家，希望大家能够喜欢。作为第一弹图纸分享，制作的是本人很喜欢的伊甸王，此次分享的图纸为50%大小比例，需要使用0.2mm喷嘴进行打印。如果需要使用0.4mm喷嘴进行打印100%放大版本，可将我分享的3mf里的部件放大。因为所以零件的组装采用方块定位，不论打印任何大小比例，大家可以先将除去定位方块的零件打印出来，使用卡尺测量空洞尺寸，再合理缩放定位方块，这样不论什么比例的大小，都可以尽可能的缩小打印公差。&nbsp;As an avid fan of Super Robot Wars, I regret that many of the mecha designs lack physical models. Leveraging FDM 3D printing technology, I’ve decided to share my own designed blueprints for various mecha with everyone. I hope you all enjoy them.For this first blueprint sharing, I’ve created a model of the Eden King, a personal favorite of mine. The shared blueprint is at a 50% scale, and it requires a 0.2mm nozzle for printing. If you wish to print a 100% enlarged version using a 0.4mm nozzle, you can scale up the components within the 3MF file that I’ve provided.Since the assembly of all parts utilizes square positioning, regardless of the print size ratio, you can start by printing the parts without the positioning squares. Then, use calipers to measure the dimensions of the cavities and adjust the positioning squares accordingly. This way, regardless of the chosen scale, you can minimize printing tolerances as much as possible.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000445893/design/2024-04-28_21e9d340fa61a.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000445893/design/2024-04-28_ba6f095366053.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000445893/design/2024-04-28_1efefb0af0d9e.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000445893/design/2024-04-28_f58514a229696.png"></figure><figure class="image image_resized" style="width:100%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000445893/design/2024-04-28_c4c911ae6cca6.png"></figure>

Space Runaway Ideon no support (50% Scale)

拼装玩具

cuncg

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000151604/design/2024-06-13_2a3ab3f4480948.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000151604/design/2024-01-22_4d9d26956d108.gif"></figure><h3>Tip: Please use the optimized version for printing to get better printing results</h3>The Year of the Dragon has specially designed a cute lucky dragon, symbolizing attracting wealth and treasures. The model production was completed in Cinema 4D, and the output model has very high accuracy, which can print larger sizes. In my printing, it is a small size, and I can also see enough details. It can print single colors or multiple colors. I use K&#39;s orange metal consumables to print the effect very well. There are several explanations as follows:<ol><li>There are two versions of the model uploaded, mainly with two designs: the body with scales and the body without scales.</li><li>There are no special settings for printing parameters, and printing can be done using preset settings. Experts can test for more ideal printing accuracy on their own.</li><li>This version of the design requires the support to be turned on for printing, and the support is also easy to remove. It is recommended to use support consumables to print the support surface, which is easier to remove</li><li>There are no requirements for consumables, and personally, I think Kexcelled&#39;s metal consumables have very ideal effects</li></ol>Update: My design has been commercialized as an electric waver<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000151604/design/2024-06-20_bdcc9eab0668f8.gif"></figure><h2>2024.6.20更新：请使用优化版本打印配置进行打印，它具有更少支撑更容易打印的优势</h2>龙年专门设计了一个可爱的招财龙，寓意招财进宝。模型制作在Cinema 4d中完成，输出的模型精度非常高，可以打印更大尺寸，在我的打印中为小尺寸，也能看到足够的细节，可以打印单色也可以打印多色，我使用k家的橙色金属耗材打印效果很理想。有以下几点说明：<ol><li>模型上传有两个版本，主要是身体有鳞片和无鳞片两个设计。</li><li>打印参数没有什么特殊设置，使用预设便可打印，高手可以自己测试更理想的打印精度。</li><li>该版本设计需要开启支撑进行打印，支持也便于拆除，建议使用支撑耗材来打印支撑面，这样更容易拆除</li><li>对耗材没任何要求，个人觉得k家的金属耗材效果非常理想。</li><li>模型已分开零件，可以自己实现多色打印</li></ol>制作过程分享：<figure class="media"><oembed url="https://www.bilibili.com/video/BV1jT4y1b7E9/?vd_source=0d3d7161a6587b2f3e211c44ce51f5ca"></oembed></figure>在接下来的版本将会做一个可电动摇手的设计，同时优化造型，实现无支撑打印。<blockquote>重大更新：</blockquote>电动摇手版招财龙已经成功产品化，效果如下视频展示：<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000151604/design/2024-06-20_bdcc9eab0668f8.gif"></figure><figure class="media"><oembed url="https://www.bilibili.com/video/BV1sE421N75z/?vd_source=0d3d7161a6587b2f3e211c44ce51f5ca"></oembed></figure>&nbsp;&nbsp;&nbsp;