user_1201351546

Nymthiriel

Bluey and Bingo Dance Mode sign. Had a request from my daughter to print one she could flip back and forth. Thought I'd share for other parents out there. There's holes in the back for nails for easy hanging. It doesn't need supports, should bridge without issue.

Dance Mode Wall Sign

for the girls

ceo51378

This saber is intentionally modular, allowing for additional parts and configuration changes. Its assembly isn&#39;t bound by a strict protocol, enabling users to creatively configure it in at least three different ways (I&#39;ll leave the details for you to discover).My aversion to glue and disdain for painting have guided my design principles—this saber is meant to be 3D printed and assembled without the need for messy adhesives or elaborate painting. Despite its numerous components, the design ensures a straightforward printing process and an even easier assembly. Plus, in the unfortunate event of breakage, replacing a single piece is preferable to an entire hilt.Named &#39;The Master,&#39; this saber draws clear inspiration from a certain Jedi Master&#39;s lightsaber. I have plans to release transformation kits in the future, allowing enthusiasts to alter the style with different emitters, activation plates, pommels, and more.I sincerely hope you all get as much enjoyment from assembling and customizing this saber as I did from designing it!Assembly Notes:<ul><li>All parts were printed at 0.2 with 3 walls and 15% infill, using SUNLU Silk PLA. The metallic bundle from Amazon (Black, White, Light Gold, Silver, Brass, Red Copper, Blue, Green) was employed for the saber.</li><li>For the activator plate, I executed a color change from gold to black at layer 6 (if printing at 0.2mm). Alternatively, you can print the piece in black and add painted details.</li><li>Assembly details are depicted in the attached images. Note that the activator box secures into the hilt by screwing down the top &#39;grenade&#39; grip. Please pardon the photo quality; I was still tuning my printer, which recently underwent a direct drive conversion when I printed this.</li><li>The only parts requiring supports are the activator box and activator grip. I used tree supports following default CURA settings.</li></ul>

CEO's Modular Sabers - The Master

starwars

Josh-3D

[Update]I&#39;ve uploaded a print profile for a Samsung Galaxy version. I had a friend test print with his charger puck, and it seemed to fit fine. I don&#39;t have a way to test and inspect in person though, so I&#39;ve tagged it as a Beta for the moment until some feedback/reviews/prints roll in, and hopefully things fit! &nbsp;ModelA stand for your Apple watch! (And now Samsung Galaxy watch too!) I wanted to explore some new ideas with this one; doing kind of an imbedded two tone look. I wanted that contrast between the outer painted shell and the inner exposed metal parts.&nbsp;This model is setup to be printed with an AMS. One could probably break the model up to be printed on a signal color printer, but my intention was for it to be printed in one piece, so is setup as such, without any additional clearances or anything.&nbsp;Hardware &amp; FilamentsFeatured FilamentsBambu PLA Metal - Iridium Gold &amp; Cobalt BlueBambu PLA Metal - Copper Brown &amp; Oxide Green&nbsp;Hardware8x M3 x 12mm (for the front face, feet, and Y bracket/base connection)2x M3 x 16mm (For the Y/Wrist connect)1x M3 x 20mm (For the wire clip/foot)2x M3 x 25mm (for the clamp around the charger)13 M3 Nuts&nbsp;AssemblyLet&#39;s get started! We&#39;ll assemble the main face clamp first. Using 2 m3x20mm screws and 2 m3 nuts. Insert the charger and tighten everything up so it&#39;s securely clamped in place.<figure class="image image_resized" style="width: 45.67%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000460577/design/2024-05-11_b4319f3ed7ce8.png"></figure>Next we&#39;ll secure the charging clamp/face to the ring. We&#39;ll use 4 m3x12mm screws and 4 m3 nuts.<figure class="image image_resized" style="width: 44.76%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000460577/design/2024-05-11_e2748d80fb755.png"></figure>Let&#39;s connect the top ring and base together using the Y bracket. Use 2 m3x16mm screws for the wrist bracket, and 1 m3x12mm screw for the base connection. Use 3 m3 nuts to secure all the screws. The nuts can be a little fiddly to get in place in the ring.<figure class="image image_resized" style="width: 59.26%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000460577/design/2024-05-11_e4359acd4ba54.png"></figure>Two more steps and we&#39;re done! Let&#39;s connect the feet now. We&#39;ll use 3 m3x12mm screws for 3 of the feet. The 4th foot incorporates a wire clip, which is an optional install. If you choose not to use the wire clip, then you&#39;ll want 4! m3x12mm screws for the feet. For our instruction today though, we&#39;re using the wire clip, so we&#39;ll only be using 3 m3x12mm screws, along with 3 m3 nuts.&nbsp;For the feet, the nut sits pretty deep, so you&#39;ll have to make sure you push the nut up enough as you tighten the screw, to help it catch.<figure class="image image_resized" style="width: 60.76%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000460577/design/2024-05-11_51c352a07f58e.png"></figure>Lastly, the wire clip! Keep that wire secure and routed towards the back. This is an optional part! The main frame is built in a way to allow it&#39;s use or not. We&#39;re going to use it though, so we&#39;ll want a m3x20mm screw and m3 nut. We&#39;ll assemble it as we did the other feet, just with the clip in place now!<figure class="image image_resized" style="width: 61.4%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000460577/design/2024-05-11_a86fb865b949.png"></figure>That&#39;s it! Enjoy!-------If you like my work, consider showing your love by <a target="_blank" href="https://www.buymeacoffee.com/josh3d" rel="nofollow noopener">Buying me a coffee</a>. Additionally, if you&#39;re looking to sell prints of my design, please check out my <a target="_blank" href="https://www.patreon.com/josh3d/" rel="nofollow noopener">Patreon</a> page for more information. on.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;

Apple/Samsung Galaxy Watch Stand - Industrial

quick useful 

digitallyforgeddesigns

Looking for a piece of pop culture to add to your 3D design collection? Look no further than this intricately designed Mandalorian N-1 Starship 3D model available on makerworld.com. This model is a meticulous re-release of the iconic Starship seen on The Mandalorian series, made exclusively for personal use. Immerse yourself in the Star Wars universe with this fan art model, featuring the highest level of attention to detail and accuracy. Various screen-captured images from the series have been used as reference for this design to make sure every engine part and gun detail is as accurate as possible. Browse through our available images to understand the quality of this model further. For any fan of The Mandalorian, this 3D model is a must-have addition to your collection. Find it on makerworld.com by searching for the "Mandalorian N-1 Starship" under the "Pop Culture" category. Let your love for the series bear fruit in this magnificent 3D model offering.

Mandalorian N-1 Starship

ideas

Collecticraft

<h2>Insight Unveiled: The Divine and the Mortal</h2>Step into the realm where divine wisdom meets mortal curiosity with &#34;Insight Unveiled.&#34; This extraordinary project brings together the majesty of Zeus, king of the gods, with the enigmatic allure of the human skull.<h3>Key Features:</h3><ol><li>The Divine Visage: The bust of Zeus, crafted with meticulous attention to detail, exudes the power and authority befitting the ruler of Mount Olympus.</li><li>Mortal Remnants: Nestled within the bust lies a human skull, a poignant reminder of the fleeting nature of mortal existence and the eternal wisdom sought by humanity.</li><li>Symbolic Union: The juxtaposition of Zeus&#39;s divine countenance with the mortal skull creates a compelling visual narrative, inviting contemplation on the intersection of the divine and the mortal realms.</li></ol>Project Objectives:<ul><li>Explore themes of mortality, divinity, and the pursuit of knowledge.</li><li>Challenge conventional notions of power and authority by blending the divine with the mortal.</li><li>Spark introspection and philosophical inquiry into the nature of existence and the mysteries of the cosmos.</li></ul>Commercial License: <a target="_blank" href="https://www.patreon.com/CollectiCraft" rel="nofollow noopener">Patrons</a> gain exclusive commercial rights to utilize and distribute this unique fusion of divine and mortal symbolism

for the girls

starwars

quick useful

ideas

fun