Cyruss_One

Budahazi_Design

3D printable gorilla model. High detail.

Gorilla (high detail)

Gr3dstampaidee

Update V.3.0&nbsp;Released new upgrade to load any spool&nbsp;Good print

SPOOL ADAPTER V.3.0 AMS BAMBU LAB

Bambu Lab tools

Thicc

Are you tired of boxes slipping and sliding around your trunk? Not anymore with these vehicle trunk retainers. Construction is easy. Print and attach 20mm velcro hooks to the retainer&#39;s foot. The best aspect of this design is the velcro allows for the retainers to be infinitely reused and reorganized.&nbsp;Print Settings<ul><li>Use a 0.4mm nozzle, I cannot guarantee the success of other sizes</li><li>warmer climates should consider printing this in ABS or ASA</li><li>15% infill</li><li>.25mm first layer to improve adhesion.</li></ul>Update - proven that articulated retainer can print laying flat, which is much easier and quicker to print. Print profile adjusted to include this change

Car Trunk Velcro Retainer 

sagatxxx

If you like my design please don&#39;t forget to give me a boost!<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000039568/design/2024-04-18_0faffe0b88dc2.jpg">&nbsp;clamp to close the ikea samla boxes more tightly, if you put a rubber band around it you can make the closure airtight&nbsp;The box itself is not watertight, so you have to put a rubber strip or similar around the entire edge so that the clips grip more tightly and remain sealed, e.g.: https://es.aliexpress. com/item/1005002531941543.htmlI had it like that for a season and it worked well.If you are not convinced, use another rubber-type material that is more watertight: <a target="_blank" href="https://es.aliexpress.com/item/1005004538431159.html" rel="nofollow noopener">https://es.aliexpress.com/item/1005004538431159.html</a>

Ikea SAMLA clamp close

IKEA

ThomaS

This is an insert for the Ikea Samla 22L drybox to improve filament spool storage (not designed to print out of the box). The insert prevents the spools from rolling around and sitting directly in the desiccant (and therefore pulling beeds of desiccant out that stuck to the spool when removing it).You will need 2x bases and 4x rods. The bases simply clip together and the rods just sit on top (you can glue the rods to the base, but it's not necessary). Printed in 0.2 mm layer height, 3 perimiters, 25% infill, and no supports. &nbsp;Update 8/1/2024: Added STEP file.

Spool Holder Drybox - Ikea Samla 22L

Filament

AU3D

This holder is specifically designed for popular jet flame lighters, which are frequently employed to eliminate stringing from 3D prints. The products are available under various brand names, yet they are identical in nature. This holder is compatible with your lighter, provided the base diameter of your lighter does not exceed 31mm at the bottom.Typically, these lighters come with a separate stand that is not compatible for simultaneous mounting with the holder. I have incorporated custom-designed Skadis hooks that feature minimal tolerances, ensuring optimal stability. Please note that one of the hooks requires supports during the printing process.<h3>Printing Instructions</h3>The print profile is optimized with zero layer cooling and no cooling for the initial three layers, effectively reducing the print time by nearly 50%. If you experience any difficulties, reverting to the standard PLA settings is recommended as a troubleshooting step.<h3>Skadis Collection</h3>I am constantly developing more IKEA Skadis attachments. Check out my <a target="_blank" href="https://makerworld.com/en/u/2942852598/collections/188108" rel="nofollow noopener">IKEA Skadis Collection here</a>.

Jet Flame Lighter Holder for IKEA Skadis

IKEA Skadis

Manicken.se

I searched for alternative versions of this trash bag roll holder but couldn&#39;t find any. So, I decided to take matters into my own hands and designed three different versions: one for double-sided tape, one for screws, and one specifically for the IKEA SKÅDIS board.&nbsp;The holder is designed to fit rolls with a maximum diameter of 67 mm. If you need a larger version, just let me know by leaving a comment or sending me a message! I have also made an XL version that fits three of my rolls. Check it out below. If you appreciate my work, please consider giving it a like. For those in Sweden, feel free to explore my webshop at <a target="_blank" href="https://manicken.se/" rel="nofollow noopener">manicken.se</a>.Have a fantastic day! 😊 Or! Check out my other models:  <figure class="table" style="height:2720.55px;width:86.51%;"><table class="ck-table-resized" style="background-color:rgb(255, 255, 255);border:1px double rgb(179, 179, 179);"><colgroup><col><col></colgroup><tbody><tr><td><a target="_blank" href="https://makerworld.com/en/models/255012#profileId-271373" rel="nofollow noopener">Multi Trash Bag Roll Holder</a></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/837110/2024-03-15_536b7cf61250a.jpg"></figure></td></tr><tr><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;"><a target="_blank" href="https://makerworld.com/en/models/373557" rel="nofollow noopener">Bottle Dryer With Lid Holder</a></td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/837110/2024-03-28_ab8d6cea5c905.jpg"></figure></td></tr><tr><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;"><a target="_blank" href="https://makerworld.com/en/models/226698" rel="nofollow noopener">Dyson V15/V11/V10/V8/V7 Wall Mount</a></td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/837110/2024-03-15_37a2ae5b98687.jpg"></figure></td></tr><tr><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;"><a target="_blank" href="https://makerworld.com/en/models/226646" rel="nofollow noopener">Post-It Stencil | Squares and Circles</a></td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/837110/2024-03-15_81be768b87761.jpg"></figure></td></tr><tr><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;"><a target="_blank" href="https://makerworld.com/en/models/226749" rel="nofollow noopener">Jewelry Holder | Wall Mounted</a></td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/837110/2024-03-15_6fff9ef39900a.jpg"></figure></td></tr></tbody></table></figure>

Trash Bag Holder Tape / Skådis / Screw Versions

Home Gadgets

Vince_Prints

Shoe hanger for hanging on the back of your bike (on the weight rack on the rear of peloton bikes)

Cycling Shoe Hanger

sport

elikoll

You have to put the ring inside the head so it fits always perfect.Show me your finished print results.

Super Mario Mushroom Car Hitch Ball Cover Towbar

SNASA

This is a small and stealthy minimalist heat insert press designed for CNC Kitchen TS100 heat insert set. I didn&#39;t want to use a counterweight so I made an invisible spring and belt system hidden in the vertical part. Its size makes it perfect for small job on the workbench :<figure class="image image_resized" style="width: 42.73%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000430484/design/2024-04-18_a86cd65962c1d.jpg"></figure><figure class="image image_resized" style="width: 42.59%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000430484/design/2024-04-18_4f0eadde94f.gif"></figure>&nbsp;The sides are super convinient to store everything you need (there is also a spot for a small alen key).&nbsp;I have added the step files if you want to design your own soldering iron mount or use a different base.&nbsp;Miscellaneous:<ul><li>20 * M3 brass insert</li><li>22* M3x8</li><li>1 * M3x6 screw</li><li>2 * M3 Nut</li><li>3 * M3x25 screw</li><li>7 * M5 nut</li><li>6 * M5x10 or M5x12 screw</li><li>1 * M5x16 thumb screw</li><li>2 * GT2 idle pulley ID Ø3mm</li><li>1 * GT2 belt (200mm should be enough)</li><li>1 * Spring or elastic band</li><li>1 * LML12B 200mm linear rail</li><li>1 * <a target="_blank" href="https://cnckitchen.store/products/ts100-101-adapter-tips-set-m2-x-m3-m4-m5-m6-1-4-m8-100-lead-and-cadmium-free" rel="nofollow noopener">CNC kitchen Heat Insert Set</a></li><li>Optional :<ul><li>1 * M4x8 Screw</li><li>1 * M4 nut</li></ul></li></ul>Assembling:<ul><li>Insert M3 brass insert (see red arrow below)</li><li>Use M3x8 screw everywhere except 1 * M3x25 (see orange arrow below)</li><li>Use 1 * M3x6 screw to lock the spring or elastic band</li><li>Use 2 M3x25 to mount the GT2 idle pulley</li><li>Insert M5 Nut (see yellow arrow below)</li><li>Make sure to run the belt before assembling the GT2 idle pulley</li><li>Use a small piece of adhesive tape to secure the belt on the arm mount (makes it so much easier to mount the belt on the sliding carriage)</li></ul><figure class="image image_resized" style="width: 79.45%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000430484/design/2024-04-18_86b4fd1a3ef78.png"></figure><figure class="image image_resized" style="width: 35.29%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000430484/design/2024-04-18_75b2c88e1b92e.png"></figure>&nbsp;Print settings:<ul><li>PETG for the soldering iron holder, other part can be printed in PLA</li><li>Layer height : 0.2 mm</li><li>No support</li><li>Print orientation as shown below :</li></ul><figure class="image image_resized" style="width: 54.24%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000430484/design/2024-04-18_75456e3a941b9.jpg"></figure>

Minimalist Heat Insert Press

tools

Printforme

Edit: v2.0 Update online.  -Durchmesser angepasst. / Jetzt 66.5mm und 53.5mm -Steg für mehr Stabilität.  ________________________________________________________________________________________________________________Ein Dosenhalter der an einer Lochwand eines Würth Werkzeugwagens angebracht werden kann.Platz für 4 Dosen.3x ~66mm Durchmesser.  1x ~53mm Durchmesser.

Würth Werkzeugwagen-Dosenhalter

DIY workbench

make 3D

- Coffee mug/drink can holder -&nbsp;I was tired of always having to be carefull to not spill my office, as I don't have much room on my desk.Therefore I designed this mug/can holder so I can keep my drinks safe!&nbsp;This is a fully 3D printed mug/can holder for most desk thicknesses. No Magnets, no bolts, no glue and no screws are needed. Just 3D printed parts.   I designed the holder so it can be printed without any support material. This way there should be no sides with lower quality finish. Resulting in a very nice print.&nbsp;If you don't have a AMS unit, the main body can be printed in on solid color and the screw an any other.&nbsp;The holder is designed to hold the most common size coffee mugs, drinking glasses and beverage cans.(Not tested with slim cans like Red Bull)&nbsp;<ul><li>The maximum diameter of a coffee mug is approximately 85 mm (The holder has a cutout for mugs with handles.)  </li><li>The maximum diameter of regular can is approximately 66 mm  </li><li>The holder fits any tabletop thickness between 15mm and 30 mm</li></ul>&nbsp;<figure class="image image_resized" style="width:72.05%;"><img src="https://makerworld.bblmw.com/makerworld/draft/417767/2024-01-15_fe5501b980aad.png"></figure>Assembly is pretty straight forward.The two large parts are joined with a 90 degree twist lock. Please be aware that the twist lock might seem tight if your printer is not well calibrated or if you are using low quality filament with poor tolerances.&nbsp;Please have a look at the short video showing how to assembly if you are in doubt.<figure class="media"><div data-oembed-url="https://youtu.be/9RAvPbI11C0"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/9RAvPbI11C0" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;I have made two versions with different qoutes on top:“More Espresso Less Depresso” and “Drink Responsibly” If you do not want any text on top, simply re-color the part within Bambu Studio to be one solid color.<figure class="image image_resized" style="width:70.19%;"><img src="https://makerworld.bblmw.com/makerworld/draft/417767/2024-01-15_9446cf9a2ade.jpg"></figure>&nbsp;My holders are printed with these filaments:Bambu Lab PLA Matte IvorySunlu PLA+ BlackBambu Lab PLA Basic OrangeBambu Lab PLA Basic Bambu GreenBambu Lab PLA Matte Yellow&nbsp;LicensingAll my designs are non-commercial and may not be sold, reproduced, or shared outside of this website.For some designs it is possible to buy a individual license for a fixed fee. Please contact me for any details regarding this.&nbsp;How to Support MeIf you like my designs, please give them a ‘like’ as this helps the model being more visible to other users.Also please consider donating via <a target="_blank" href="https://www.buymeacoffee.com/make3d" rel="nofollow noopener">https://www.buymeacoffee.com/make3d</a>  All support is highly appreciated!&nbsp;<h4>Updated 17-01-2024: Added Print Profile V1.1 Increased the span of the opening to allow tapletops down to 10mm thickness.</h4>

art