user_1176412138

Dukester

This is another Milwaukee Tools keychain, this one prints with the face down to ensure a good crisp first layer.It prints quick and looks amazing.What a great stocking stuffer for the dads in your family&nbsp;

Milwaukee Keychain

摆件

Alexis_

These versatile closures are perfect for keeping your items fresh and secure. Whether you're sealing herb bags, breakfast cereal bags, tea leaf sachets, or any other packaging, this small clip have got you covered.&nbsp;&nbsp;- Easy to Use: With a simple clip design, our closures are user-friendly and hassle-free.- Convenience: Say goodbye to messy packaging and hello to easy sealing.&nbsp;&nbsp;&nbsp;The initial design was inspired by Mikolas Zuza's, but I then redesigned it only the spring system is identical.&nbsp;&nbsp;

Mini clip - for bags and packaging

生活

Aesth3tix

After weeks of testing, I happily introduce the A3X Driven Support Shaft! &nbsp;I was tired of seeing tangles in my AMS randomly at the worst possible times, so I set out to find the cause and hopefully, a solution. What I found was my AMS driven support shafts on slots 2 and 4 were not always “gripping” the spool as the machine began to roll the filament back up. The timing was, ever so slightly, off which would cause a bird nest of filament inside the AMS. Sometimes the machine could recover, however, other times, it could not. Therefore, I would be left with an error code and a paused print job. To remedy this, I installed a brand-new driven support shaft from Bambu Lab, but it did not fix my issue and slot 4 (I used it exclusively to determine the fix) continued to give me trouble. Thus, I set off to create my own driven shaft and to be quite honest, I was surprised when it actually worked out after having the issues for so long. &nbsp;The A3X Driven Support Shaft was born. Featuring flexibility of TPU 95A, 693-2Z bearings, smaller outer diameter to better suit larger spools, and quick-change grab for easy removal. This thing has worked wonders for me. Bambu spools just glide during loading and unloading and other, smaller 1kg spools work just as well. The smaller OD allows for cardboard spools with printed rings to move much more fluidly. With the stock shaft, there is barely any clearance between the spool ring and the lid. Check out the pictures and you will see an example of such. I had ditched the rings because of this and was just buying extra spools to transfer to but now I can actually use them and be worry free. &nbsp;I strongly suggest using TPU 95A. I tested both PLA and TPU 95A thoroughly and found the TPU versions were much more efficient and quieter. For me, I used it as an excuse to print with the new TPU 95A HF from Bambu Lab and it prints great and is much faster than standard TPU. &nbsp; PARTS LIST<ul><li>(2x per shaft) 693-2Z bearings [3mm x 8mm x 4mm] </li></ul> <a target="_blank" href="https://www.amazon.com/uxcell-Groove-Bearing-2080093-Bearings/dp/B07FVYPMPX/ref=sr_1_1_sspa?crid=14CZY41AZN41I&keywords=693-2z%2Bbearing&qid=1701034044&sprefix=693-2z%2Bbearing%2Caps%2C87&sr=8-1-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&th=1" rel="nofollow noopener">https://www.amazon.com/uxcell-Groove-Bearing-2080093-Bearings/dp/B07FVYPMPX/ref=sr_1_1_sspa?crid=14CZY41AZN41I&keywords=693-2z%2Bbearing&qid=1701034044&sprefix=693-2z%2Bbearing%2Caps%2C87&sr=8-1-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&th=1</a>&nbsp;<ul><li>(2x per shaft) 3mm x 12mm Dowel Pins</li></ul><a target="_blank" href="https://www.amazon.com/MroMax-3x12mm-Stainless-Rust-Proof-Elements/dp/B07ZF3478S/ref=sr_1_1?crid=134428WTTJJEU&keywords=m3+x+12mm+dowel&qid=1701033993&sprefix=m3+x+12mm+dowel%2Caps%2C106&sr=8-1" rel="nofollow noopener">https://www.amazon.com/MroMax-3x12mm-Stainless-Rust-Proof-Elements/dp/B07ZF3478S/ref=sr_1_1?crid=134428WTTJJEU&keywords=m3+x+12mm+dowel&qid=1701033993&sprefix=m3+x+12mm+dowel%2Caps%2C106&sr=8-1</a>&nbsp; Assembly Tips<ul><li>Dowel pins should be near flush to the end of the bearing (see photo). Tolerance here is very tight so the dowel cannot wobble. The dowel pins will likely have some variations due to the manufacturing tolerances so if it is not tight, grab another dowel. I had a few undersized pins in my order (as well as some oversized).</li><li>Slide dowel into the shaft until you see a very small gap between the bearing and the shaft (see photo). This insures smooth operation. If the bearing is mashed up against the shaft, it will not be near as smooth. (Ask me how I know lol) Again, tight tolerance to reduce any wobble. </li></ul>&nbsp; Special Notes and Findings&nbsp;<ul><li>Nope, still cannot fit Atomic spools with the lid closed unfortunately, and believe me, I tried. It is still too wide to fit and rubs against the internal guides on the lower side of the AMS. So, while you can make it work, it is still just a bit too much resistance for me to be comfortable with. </li><li>After testing several brands, I never ran into an issue of the shaft being too small for your standard 1kg spools. (Looking at you Sunlu) </li><li>As briefly mentioned before, the cardboard spools with printed rings worked so much better with the added clearance between the lid or the AMS. During testing I noticed some would actually rub the inside of the lid causing a lot of friction and resistance. This alone was the selling point for me to share this A3X concept in hopes of saving others from future frustrations and unanswered questions. </li></ul>&nbsp;Give it a try! See how you like it and get back to me!HAPPY PRINTING!!&nbsp;&nbsp;Check out some of my other projects below!&nbsp;<a target="_blank" href="https://makerworld.com/en/models/63060#profileId-65793" rel="nofollow noopener">Bambu Tough Case by Aesth3tix - MakerWorld</a>&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/208427/2023-11-12_d259976fd846d.png">&nbsp;<a target="_blank" href="https://makerworld.com/en/models/55336#profileId-56865" rel="nofollow noopener">Swatch Box MAX by Aesth3tix - MakerWorld</a>&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/208427/2023-11-01_2a922a0fde491.png">&nbsp;<a target="_blank" href="https://makerworld.com/en/models/58151#profileId-59879" rel="nofollow noopener">Bambu Lab Coupler Adapter (Splitter Mod) by Aesth3tix - MakerWorld</a>&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/208427/2023-11-05_86b44ae12e6f6.png">&nbsp;<a target="_blank" href="https://makerworld.com/en/models/34662#profileId-48522" rel="nofollow noopener">The Original AMS PTFE Guide by Aesth3tix - MakerWorld</a>&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/208427/2023-10-31_6505b403292f3.png">

A3X Driven Support Shaft (TPU)

拓竹

Lots of great storage solutions for my Bambu Lab spare parts out there but I wanted something with less restrictive internals. This case is completely open on the inside with no dividers. Works great for packs of PTFE tubing, belts, cables, etc. Pretty much anything that does not have to be bound to a certain space. &nbsp;&nbsp;Construction is solid. (4x) 3mm x 35mm socket head screws and nuts are all you need for the snap lock latch and the rear hinges.&nbsp;&nbsp;I ran through countless different versions of the snap lock hinge. I wanted it to be as secure as possible while still maintaining functionality. You'll notice, it is a tight fit but with a firm press, it will snap lock right in to place and will not accidently unlatch. I absolutely love the way it turned out and the “snap” of the locking feature is so satisfying. &nbsp;<ul><li>The print profile is ready to go with correct settings for a strong latch. However, if you decide to use your own settings, please use a minimum of 30% infill, slower speeds, and PLA+ or better for the latch to assure you have a long lasting, functional, and strong latch. </li></ul>&nbsp;&nbsp;Below is a link for the 3mm socket heads but there are plenty of other listings available. This assortment has them partially threaded which is perfect for the project. <a target="_blank" href="https://www.amazon.com/Kadrick-Assortment-M3x4MM-35MM-Machine-Anti-Rust/dp/B0BRWCFD6Q/ref=sr_1_1?crid=5CZB34HGAEFO&keywords=kadrick%2Bmm%2B16%2C%2C-35mm&qid=1699821184&sprefix=kadrick%2Bmm%2B16%2C%2C-35mm%2Caps%2C160&sr=8-1&th=1" rel="nofollow noopener">Kadrick 1250 Pcs M3 Screws and Nuts Assortment M3x4MM-35MM, Hex Socket Head Cap Metric M3 Machine Bolts Kit, 12.9 Grade Alloy Steel,Anti-Rust Up Graded,Black Zinc Plated,Free Allen Head Wrench: Amazon.com: Industrial & Scientific</a>&nbsp;<figure class="image"><img src="https://m.media-amazon.com/images/I/81WRDG6oloL._SL1500_.jpg"></figure>&nbsp;&nbsp;Check out some of my other storage solutions!&nbsp;<a target="_blank" href="https://makerworld.com/en/models/38349#profileId-37146" rel="nofollow noopener">Swatch Box SOLO by Aesth3tix - MakerWorld</a>&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/184699/2023-11-05_b5c31cdc17601.png">&nbsp;<a target="_blank" href="https://makerworld.com/en/models/57752#profileId-59478" rel="nofollow noopener">Swatch Box A1 by Aesth3tix - MakerWorld</a>&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/184699/2023-11-05_83a140c4b0bae.png">

Bambu Tough Case

工具

Alec_Bings

I wanted a ghost i could put over a battery operated tealight. I couldn't find one I liked so I made one in Fusion360.

摆件

生活

拓竹

工具

玩具