user_113912815

toys

TwinShepherdPrinting

Remix of my original Catch all organizer. This is the same model as the one included in the original raw files download, made into a separate post for convenience and Bambu Handy access.&nbsp;The original: <a target="_blank" href="https://makerworld.com/en/models/143470#profileId-156005" rel="nofollow noopener">https://makerworld.com/en/models/143470#profileId-156005</a>

Catch All Desk Organizer with Caliper Hanger

tools

Martin Kozak

<h3>Model</h3><ul><li>Model is 45 cm long, consists of 70 pieces and needs 720 g of PLA filament. Total print time is about 30 hours.</li><li>Biggest part is 214 x 118 mm and does not fit A1 mini build plate.</li></ul><h3>Postprocessing</h3><ul><li>Remove supports.</li><li>Use deburring tool to remove sacrificial bridging inside the holes.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/469116/2023-12-30_7f665c461fbba.jpg"></figure>&nbsp;<h3>Assembly</h3><ul><li>See attached assembly guide.</li><li>Due to the printer tolerances and nature of FDM printing, sometimes you'll need to apply more strength to assemble, some parts will be little loose and need a glue to secure it in position and whole drive train will need a lubrication in order to make it work smoothly (PTFE lubrication or silicion oil in spray recommended).</li></ul>See my other upscaled creation:<ul><li><a target="_blank" href="https://makerworld.com/en/models/114353#profileId-122927" rel="nofollow noopener">https://makerworld.com/en/models/114353#profileId-122927</a></li><li><a target="_blank" href="https://makerworld.com/en/models/133466#profileId-144784" rel="nofollow noopener">https://makerworld.com/en/models/133466#profileId-144784</a></li><li><a target="_blank" href="https://makerworld.com/en/models/146718#profileId-159991" rel="nofollow noopener">https://makerworld.com/en/models/146718#profileId-159991</a></li></ul>

Helicopter 300 %

lego

sipura

Hello everyone,&nbsp;UPDATE 10/03/2024New upper inner tray profile added. Easy to print. To assemble you need 4pcs magnets 8x1,5mm and 2pcs filaments for hinges. &nbsp;There were a lot of questions and a lot of you asked for a bigger case, so we decided to make it.This is the 3rd case we made and the largest, the XL model  The difference from the previous models is that we changed the design of the clips, and the hinges are 0.5mm thicker than the first standard, we think that&#39;s a sweet spot.&nbsp;Also, the inner boxes are larger and are modular. You can remove the partitions, and increase or decrease the inner box according to your needs.&nbsp;Big advantage is that the inner boxes are compatible with those of the smaller models, which you can see in the last two pictures.&nbsp;Simple print without supportAll parts are completely printed with PLA, only the gasket needs to be printed with TPU in order to close smooth and seal nicely.&nbsp;To assemble it, you need:6pcs M3 nuts2 pcs of screws M3x32mm3pcs of screws M3x20mm&nbsp;I hope you like it, and enjoy printing and using this useful case.Feel free to put your pictures of printed models in comments. :D&nbsp;Also, if you need some custom accessories for all our models, you can contact us on our patreon page which is in bio.&nbsp;Enjoy printing :D

Utility XL - case

printer upgrades

Pokemon