木心

3DMON maker

I like MihaiDesigns' idea and the P1P Armor Modplate. This is a remix of Bambu Lab AMS Stacking Stand with Armor Modplate style.All gaps for assembly are intentionally very small. If it's difficult, please use a tool like a rubber mallet.&nbsp;Updated on Jan. 7th, 2004- The wall extension(Riser) is 20mm taller than the previous one, so the lower AMS top lid can fully open without the need to hold it.- Also, you can add one more bracing when you use the wall extension for more rigidity.&nbsp;Pins are separate parts because they need more strength, so at least 50% infill and 4 wall loops are recommended.* If you want to push the lower AMS further back, please use Pin4 v2 & Pin4-Spacer instead of Pin3 v2.* All pins are redesigned for better strength. Thanks for the great idea! <a target="_blank" href="https://www.printables.com/@djwhouse" rel="nofollow noopener">@djwhouse</a> Now, pins can be printed horizontally.<ul><li>Pin1 v2(13mm) & Lock : for assembling bracing parts.</li><li>Pin2 v2(40mm) : for adding side wall extensions.</li><li>*Pin3 v2(20mm) : for joining bracing assembly and side walls.</li><li>*Pin4 v2(50mm) & *Pin4-Spacer : (Deeper) for joining bracing assembly and side walls.</li></ul>&nbsp;If you need a build plate holder version, please check the link below.<a target="_blank" href="https://makerworld.com/en/models/62232#profileId-64745" rel="nofollow noopener">https://makerworld.com/en/models/62232#profileId-64745</a>&nbsp;

AMS Stacking Stand Remix

卷线

GlennovitS 3D

This model is made to combine 2 things: a personal color-swatch-collection and ‘fidgeting’. I ended up making this flexible chain of color-swatch-links that just snap together after printing. And to top it, I designet a little cute astronaut head to go on top. This is a permanent resident on my desk now :-)<h3>Overview</h3>There are multiple style of the links. You can print one or more in every color - whatever you feel like.<ul><li>Basic Link</li><li>Hollow Link</li><li>Layers Link (to see the layer-transparency - 0.2, 0.4, 0.6 and 0.8 mm)</li><li>Bridge Link (to see bridging capabilities)</li><li>Shapes Link (to see tiny shapes / retraction)</li></ul>And then of course the optional (but cute) astronaut-robo-head ;-)<h3>Assembly</h3>When printed, simply snap them together.Too tight? Use a lille sandpaper and sand down the pointy bit a litte - quick and easy fix!<h3>Print instructions</h3>Here is a few ideas for slicer-settings:<ul><li>Speed on first layer: 50% (To ensure good bed adhesion take your time here!)</li><li>Supports: NO supports</li><li>Brim: NO brim</li></ul>Happy printing!&nbsp;<h3>Want to show your support?</h3>You can see all my designs on Printables - and you can become an active supporter. I would really appreciate it!<a target="_blank" href="https://www.printables.com/@GlennovitS3D" rel="nofollow noopener">https://www.printables.com/@GlennovitS3D</a>

卷线

色卡虫