！阿立！

harrypulvirenti

It is basically an optimisation of the original design but is functionally the same. This remix eliminates a rear wall to use less material and makes overhangs less pronounced to make the model easier to be printed. I strongly recommend using brim to print it if you don't want to see the heel fall.You can find the suggested orientation used to print the object in the images.With the proposed orientation the object should fit without scaling it, you will maybe just need to move it a little bit into position, but some user reported that scaling it down to 95% also works well. &nbsp;I tested it with my X1C and is perfectly compatible. About the P1P the original model was compatible with the P1P without enclosure and this remix have the same compatibility

Bambu Lab - Filament Poop Bin - X1, X1C, P1P and P1S

拓竹机器工具

benzhe

2024.01.04: Updated to an easy-to-mount version.2023.11.23: First version.&nbsp;Spool adapter for Bambu Lab AMS, fit for most 195mm diameter spools, using about 20g filament(10g by one unit)&nbsp;Print two units for one spool, then mount them on the two sides of the spool.&nbsp;If the outcome is tiny loose, apply glue to the valley of the circle, or slightly reduce the print size.&nbsp;Print tips:<ul><li>Printable in PLA or PETG. Maybe best in TPU, but I haven't tested it.</li><li>Fastest printing when setting all surface and infill patterns to Concentric.</li></ul>------中文版本：&nbsp;拓竹 AMS 料盘适配器，适用于大部分 195mm 线盘，常见于国内耗材品牌，比如 JAYO，相对比店家提供的 STL 模型，该模型仅消耗 20g 约 ¼ 的材料，而且更稳定耐用。注意需要一个线盘需要打印两份，各套在圆盘上。&nbsp;如果套上后发现松动，可以在圆环内测凹陷处涂些502，或者缩小模型后重打。&nbsp;打印技巧：<ul><li>PLA 或者 PETG 都没问题，TPU 效果可能更好</li><li>各面和填充图案设置为同心圆可以得到最快的打印速度</li></ul>如果出现拉丝情况，清除拉丝即可，不影响使用&nbsp;建议使用更新版本（带 _easy_mount 后缀），方便安装

拓竹机器工具

其它工具