user_1107102893

Freer

👍👍Please 🚀Boost this model if you like it, it really helps!👍👍&nbsp;The famous Spiral Vase Mode Rose by lytta.&nbsp;Glue together with your favorite adhesive.&nbsp;Settings if not using preconfigure profiles:All Models including stems must be printed in Vase Mode<ul><li>In Prusa slicer, this is the “Spiral vase” option you can check off in Print Settings &gt; Layers and Perimeters. It will automatically change several of your settings to be compatible with the mode.</li><li>In Cura slicer: Special Modes &gt; Spiralize Outer Contour</li><li>In Bambu Slicer: Process &gt; Others &gt; Special Mode &gt; Spiral Vase (checked)</li></ul>&nbsp;&nbsp;

Spiral Vase Rose

Decor

Llλmbda

Edit: added a second plate for Lid without supports as requested by user, added new plate for different orientation of spots, added new plate for one piece flower body if anyone wants to AMS multicolor it Yet ANOTHER Mario themed piggy bank model! This time we have a GIANT 2ft tall piranha plant floor bank! This model was originally meant to be a coin sorter as well but after many failed iterations I decided to just have it be a spiral ramp as all the designed I tried I could not acheive 100% success on the coin sorting. This piggy bank is LARGE and has many parts!  This is not meant to be a toy or moved around constantly and is meant more as a floor decor piece that you can throw loose change into as you walk in. Printing in orientation provided will be successful but will leave some slight blemishes on the underside of the rounded edges. Once everything is assembled these areas are hardly noticeable so its user choice of if you would rather have a slightly wonky bottom that can probably be nailed with great supports, or a seam where you glued the pieces together. Cut versions are provided on seperate plates All connectors have a tolerance of .2mm and should fit easily into the provided holes, glue both halves of the ramp together as well as the bottom piece. Glue your spots onto your flower body, then attach the plant lips to the flower body, mine fit so snugly in place I didn't even have to glue it. Slide your flower body over the top of the coin funnel and it should fit into place with some slight persuasion, once that is seated and glued you may then add the top of the coin funnel to the ramp. Glue your teeth in place and youre good to go!  If you're worried about stability you can glue the entire vine into the top of the lid to hold it in place. Happy Printing!

Mario Piranha Plant Large Spiral Piggy Bank

useful stuff

eatrix

Planter “Mother and Child”&nbsp;This might be a perfect gift for your mother (or significant other) to show them, that you appreciate their love.&nbsp;Bigger head size is about 100 mm (3.94 inch) diameter, smaller ~ 80 mm (3.15 inch). It should be fine to scale bigger.&nbsp;For this model I chose Bambulab strength profile, because external wall speed is slower and it model looks better on some filaments.It adds a little bit extra time (about 40min), but I think it&#39;s worth it.&nbsp;This model needs some support on arms, model is presliced with tree supports.I like to print these planters with fuzzy skin turned on (contour, fuzzy skin distance - 0.3, fuzzy skin thickness - 0.1).It can be printed smooth also, just be sure to check if seam is placed at Back/Rear.&nbsp;When planting cactus or succulents at the bottom I add a little bit of pebbles for drainage and then potting soil.And don&#39;t forget to water it according to your plant needs :)&nbsp;You can find other similar People planters at my profile:&nbsp;<img class="image_resized" style="width: 22.02%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000453527/design/2024-05-15_4a3cf01211066.jpg"><img class="image_resized" style="width: 22.09%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000453527/design/2024-05-15_40783516be3fa.jpg"><img class="image_resized" style="width: 22.03%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000453527/design/2024-05-15_8f7aeaa76f35c.jpg"><img class="image_resized" style="width: 22.08%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000453527/design/2024-05-15_34f1c79972c7e.jpg">

Planter "Mother and Child"

mother's day 

Waffly3D

Cute Bunny I modeled using Blender 4.0! Printing Multiples Will Optimize Filament Usage!View My Other Work Here! → <a target="_blank" href="https://www.etsy.com/shop/Waffly3D?ref=l2-about-shopname" rel="nofollow noopener">https://www.etsy.com/shop/Waffly3D?ref=l2-about-shopname</a> &nbsp;

Articulated Cute Bunny

easter 

soukup273

A great idea for a international women&#39;s day gift!&nbsp;a beautiful rose with a stem that is suitable for decoration or as a gift. print the parts separately. print the flower in vase/spiral mode.&nbsp;it is perfect for decorating the table at Christmas dinner, or also for decoration at the approaching New Year&#39;s Eve party! suitable as a decoration for any other party or birthday party :)<h2>!assembly requires glue, ideally instant glue or other plastic glue!</h2>&nbsp;It looks beautiful as a bouquet in combination with my other models!with Tulip:<a target="_blank" href="https://makerworld.com/de/models/94713#profileId-101302" rel="nofollow noopener">https://makerworld.com/de/models/94713#profileId-101302</a>&nbsp;with Rose:<a target="_blank" href="https://makerworld.com/de/models/89698#profileId-96027" rel="nofollow noopener">https://makerworld.com/de/models/89698#profileId-96027</a>&nbsp;with Deffodil:<a target="_blank" href="https://makerworld.com/de/models/94751#profileId-101334" rel="nofollow noopener">https://makerworld.com/de/models/94751#profileId-101334</a>&nbsp;&nbsp;the model is completely a remake from the beginning based on the models created by lytta and Grafit&nbsp;

Beautiful Rose With Stem  - mother’s day Gift

Valentine's 

aPyroDesign

&nbsp;&nbsp;This Fire Multicolor Animated Fidget Spinner is designed to be printed as a multicolor print using the AMS, but can be printed using layer swaps or just as one solid color.&nbsp;This fidget spinner is unlike a standard spinner. The shapes that are on the spinners are frames of animation. When you spin the spinner and view the spinner through a smartphone camera, the animations come to life. There are also two other ways to view the spinners. The instructions are below for the 3 different viewing methods.&nbsp;Smartphone Camera Instructions: Click <a target="_blank" href="https://spinnermation.com/pages/cell-phone-method" rel="nofollow noopener">HERE</a>&nbsp;Strobe Light App Instructions: Click <a target="_blank" href="https://spinnermation.com/pages/strobe-method" rel="nofollow noopener">HERE</a>&nbsp;Handheld viewer: Click <a target="_blank" href="https://spinnermation.com/pages/handheld-spinner-viewer" rel="nofollow noopener">HERE</a>&nbsp;&nbsp;You will need an r188 bearing for the spinner.Recommended bearings from Amazon: Click <a target="_blank" href="https://www.amazon.com/dp/B095GTJC1R?linkCode=ssc&amp;tag=onamztravi04a-20&amp;creativeASIN=B095GTJC1R&amp;asc_item-id=amzn1.ideas.1JB9SWU6KEPUY&amp;ref_=aip_sf_list_spv_ons_mixed_d_asin" rel="nofollow noopener">HERE</a>&nbsp;Assembly GuideEasy assembly video: Click <a target="_blank" href="https://drive.google.com/drive/folders/1zjWD1vB6mJ9Tk475IS7QAs6kHIoJ6YSH?usp=drive_link" rel="nofollow noopener">HERE</a>&nbsp;&nbsp;Files included:&nbsp;3MF file that is ready for AMS printing.&nbsp;Solid spinner File for filament swapping. (Optional)&nbsp;Separate layers for multicolor printing (optional. If Needed)&nbsp;Top and Bottom Cap files.&nbsp;Bearing Top Cap. This part is to lock in the bearing.&nbsp;Bearing top tool. This will make it easier to lock on the bearing top cap.&nbsp;&nbsp;Interested in selling my spinners?  Check out my Patreon for more info.  Click <a target="_blank" href="https://www.patreon.com/APD" rel="nofollow noopener">HERE</a>&nbsp;&nbsp;&nbsp;&nbsp;

Fire Multicolor Animated Fidget Spinner

Fidgets

Simple Solutions 3D

You do not have the right to sell this file or any prints of it.  You do not have the right to distribute the files.  If you wish to share, please provide the link to this page.  If you want commercial rights (sell prints of this file), be sure to check out my listing on <a target="_blank" href="https://cults3d.com/en/3d-model/game/scaley-dragon-egg-threaded" rel="nofollow noopener">Cults3D</a>.&nbsp;The Scaley Dragon Egg is the perfect home for your favourite 3D printed dragon! As my first organic design it features a super scaley texture, overhangs that can be printed for a smooth finish, and an addictingly easy to open and close thread ensuring a perfect alignment every time!&nbsp;100% scale fits a Baby Cinderwing3D dragon or two Tadlings or a 65% Articulated Crystal Dragon by Saber3D (thanks to @GenghisKhan39)150% scale fits a full size Cinderwing3D Crystal Dragon200% scale fits a 125% Crystal Dragon (thanks to @BloodyBooger)110% scale fits a a 75% Sabre3D Crystal Dragon (thanks to @kahems)&nbsp;If you find what size fits other models, please comment and I'll update the description with credits to you.&nbsp;I want to thank <a target="_blank" href="https://makerworld.com/en/models/102934#profileId-109616" rel="nofollow noopener">SprocketStudios</a> for the inspiration. I found their design and loved it, but needed to fix some overhangs so I designed my own from scratch after learning Fusion360.&nbsp;For those asking, the dragon picture is from Cinderwing3D and are available <a target="_blank" href="https://www.cinderwing3d.com/" rel="nofollow noopener">here</a>&nbsp;&nbsp;

Scaly Dragon Egg with Threads

dragon stuff

Julia Ebert

This is a big toy human figure that's inspired by a Lego minifigure. I spent a lot of time making this model from scratch to match the original design while making tweaks for tolerances, printability, and strength. While there were a number of minifigure models I found online, most were not designed for printing, which is a particular challenge for the leg, arm, and hand joints. I'm particularly proud of the universal clip I designed for these, which makes for easy assembly and stiff-enough joints to pose your figure.I designed the clips and tolerances for this model to be printed at 100% (10x original Lego scale), but people have previously had success printing my <a href="https://www.printables.com/model/78695-mega-lego-like-skeleton-101-scale" rel="nofollow">10x Lego-like skeleton</a> at smaller scales (eg, 50% or 5x Lego-scale).Now that I have a base model for a Lego-like figure, this opens up a host of options for specific Lego-like figures. If there's something particular you're interested in, leave a comment or send me a message! If you want to make your own modifications, I've included STEP files for all parts (just be sure to give credit for my original design).Fully assembled, this model stands 40 cm (~16 inches) tall. I printed mine with Hatchbox true blue PLA, Hatchbox true red PLA, and Prusament mango yellow PETG.<h4>Printing Instructions</h4>I've included 3MF files for all parts, and parts should import correctly oriented for printing.<ul><li>For PrusaSlicer 2.6+: you just need to load the project file. (This makes use of organic supports, for the legs, which are added with PrusaSlicer 2.6.)</li><li>For other slicers: I've included details about special instructions for all parts, so you should be able to replicate anything necessary for proper printing. Except where otherwise noted, I printed parts in PLA at 0.15mm layer height with 7% cubic infill and without supports.</li></ul>You will need to print:<ul><li><code>32x-connector-pins.3mf</code>: You should need 30 pins for assembly (or 26 if you print the solid head); this has 2 extra just in case. If you have trouble with bed adhesion, add a brim</li></ul><h5>Legs</h5><ul><li><code>legs.3mf</code>: Uses tree supports the top of the lower hole on the leg.</li><li><code>hips.3mf</code></li><li><code>2x-limb-clips.3mf</code>: This file contains two clips. You'll need to print one set of two in the arm/body color, and one set in the leg color. Important: I recommend printing this in PETG or ABS with 25% infill, because it will have to flex and PLA might snap.</li></ul><h5>Body</h5><ul><li><code>arms.3mf</code>: These print with a small surface area on the bed (the wrists), so you might want to add a brim if you have trouble with bed adhesion.</li><li><code>body.3mf</code></li><li><code>2x-limb-clips.3mf</code>: This file contains two clips. You'll need to print one set of two in the arm/body color, and one set in the leg color. Important: I recommend printing this in PETG or ABS with 25% infill, because it will have to flex and PLA might snap.</li></ul><h5>Head & hands</h5><ul><li><code>2x-hands-wrists.3mf</code>: Requires supports on the underside of the wrist clip. Like the limb clips, I recommend printing with PETG (or similar) with 25% infill.</li><li>One of: (all require supports on the underside curve of the head)<ul><li><code>head-face-mmu.3mf</code>: Print the head & face as one part with some sort of multi-material printer (e.g., Prusa MMU or Bambu AMS). Use supports on the underside curve of the head.</li><li><code>split-head.3mf</code> and <code>face.3mf</code>: Print the head (with cutouts) in two pieces. Use pins and glue to connect the halves. Print the face separately and glue it in.</li><li><code>solid-head.3mf</code> and <code>face.3mf</code>: Print the head and face as separate prints. Use supports on the underside curve of the head. Then glue the face parts into the head.</li></ul></li></ul><h4>Assembly Instructions</h4>In addition to the printed parts, you will need cyanoacrylate glue (CA glue/superglue). <h5>Legs</h5><ol><li>Glue the pins into the top of the hip. Add glue to the holes and bottom surface of each of the hip pegs and attach. Important: The slope of each hip peg should be facing out to the sides. If the pins don't want to go together, check that you have this orientation right!</li><li>Use the same gluing approach to attach the limb clips to each side of the hips.</li><li>Gently but firmly press each leg onto the clips. It should snap into place. The hips are symmetric, so you can't put the legs on backwards. This requires a fair bit of force, but you shouldn't need a hammer. If it won't go on, slightly sand or file down the outer head of the limb clip (rather than the inside of the hole on the leg). Warning: The clips are not designed to come out once they're attached, so make sure you're ready.</li></ol><h5>Body</h5><ol><li>Glue the limb clips into each arm, like you did for the legs.</li><li>Glue the wrist onto the hand, with the pins. Because of the relative print orientations here, it's best to use a bit more glue here to make sure it stays on.</li><li>Press each wrist clip into the arm. (They're the same, so you can't put in the wrong hand.)</li><li>Press each arm clip into the body. The body is also symmetric, so you can't put the arms on backwards.</li></ol><h5>Head</h5>If you printed the separate head and face pieces, glue the face pieces into the head. You may need to file or sand some of the face pieces to fit, depending on how well the supports worked.<h4>License Note</h4>This model is marked as non-commercial because I don't want anyone (including myself) having Lego come after them with a lawyer. If you choose to sell prints of this model, you do so at your own risk!

Mega Lego-like Minifigure (10:1 scale)

Characters

Panky1978

Basic Nintendo arcade, without electronic components, it is made of PLA, no supports are needed.Upgrade with arcade stick and buttonsPD: The photos are of a different model with USB sockets and a fan, but the assembly parts are the same.

Arcade Nintendo Switch y Switch Oled

Cool Stuff

TKB-3D

Sword will suck itself in one way and shoot itself out if you reverse it! You can click it like a mechanical pen.&nbsp;Post Some Pictures of your Swords, I would love to see what color combos people come up with!&nbsp;Requires 12 6X3mm Magnets, easily found on Amazon for cheap and some Super Glue.After you do the below steps to get the Magnets in you will need to super glue the two half together. The little block that prints goes in the sword handle to help line up the side while the glue dries. And the Scabbard clips together but still need a little glue on the rims.&nbsp;Here a Tool to Help press the Magnets in if you have trouble. There are tight fit so they dont come out<a target="_blank" href="https://makerworld.com/en/models/21186#profileId-19454" rel="nofollow noopener">https://makerworld.com/en/models/21186#profileId-19454</a>&nbsp;Magnet Placement: have magnet North pointing out on one side of the sword and magnet South pointing out of the other side. And do the same with the Scabbard North pointing out on one side and magnet South pointing out of the other side. I recommend a tiny drop of glue under the magnets.<img src="https://makerworld.bblmw.com/makerworld/draft/51105/2023-09-24_07336d542414e.jpg">

Magnetic Fidget Sword

Swords

TwistyPrints

Keep in mind that the purchase of this model does not include a commercial license. If you want to sell prints of our models ,get all our creations in early access and exclusive models take a look at our Patreon Page!⭐ ⭐⭐<a target="_blank" href="https://www.patreon.com/user?u=81262195" rel="nofollow noopener">https://www.patreon.com/user?u=81262195</a> ⭐⭐⭐ Follow us on instagram to stay updated about new models !-<a target="_blank" href="https://www.instagram.com/twisty_prints/" rel="nofollow noopener">https://www.instagram.com/twisty_prints/</a>

Zombie wall mount

halloween

dangles_

VERSION 2Changes made to the main design and have been confirmed to be sturdier and easier to get the blade in. Old versions have been removed and print profiles for main model and shorter model have been added. Version 2 also includes a “push stick” in the profile to help safely install the blade. &nbsp;About the ModelCuter that makes cutting those annoying sheets of Christmas gift paper rolls smoother and cleaner. &nbsp;PartsDesign is based around a #11 Hobby Blade. Packs of a lot of these can be found on amazon for very cheap. &nbsp;AssemblyOnce printed and blades have been acquired, you can *carefully* slide a blade into the slot. Using the printed “push stick” to push the blade further in. The lower hole is designed to allow you to use a small screwdriver to pull the blade down into place (as well as take it out).

Wrapping Paper Roll Cutter (VERSION 2)

Christmas 

bigdog7

This spool adapter will fit any cardboard spool with a hub size of 55 to 57mm. Print with 10% infill (I used Gyroid) and with at least 2 walls.