Marson1979

Rotating stand with 608 bearing for easy panting

painting stand 608  bearing

pintura

fauxsoul

I printed the recessed logo dock from MeesterED but there were a couple improvements that I wanted to make, I was just going to update the original STL but there were quite a few things wrong with the geometry so I just took a few parts from his and LordLeXaT's design to improve it.<ul><li>Fixed geometry</li><li>Fixed depth for connectors recess so that the console actually sits flush against the dock</li><li>Taller back support</li><li>Optional holes to insert ~ 40mm x 4mm felt pads (got mine from dollar tree)</li><li>Cable routing retention</li><li>General increase in heft so it's not so easily moved</li></ul>Included is the .skp file if anyone wants to make any adjustments.Category: Video Games

PS Vita 1000 Dock (fixed geometry++)

consolas

mail.iou

Print Filament:PETG, ABS, and ASA are the best, and PLA+ is also acceptable. If it is PLA, it may be deformed or sticky due to the heat of the filament.&nbsp;This is a redesigned Poop Baffle, version 2 improved: 1. One-piece printing. 2. The hole and groove design is canceled on the poop impact surface, and it is changed to a solid one with raised groove lines to reduce poop rebound. 3. Added two new sizes of poop storage boxes (90x150mm, 110x150mm).&nbsp;Print Filament:PETG, ABS, ASA are the best, PLA+ is acceptable but may be deformed due to the heat of the filament.&nbsp;Notice: If you use a 90x150mm box, do not intersect the wall position of the box with the baffle to avoid collision when the Z-axis is lowered, as shown below:<img src="https://makerworld.bblmw.com/makerworld/draft/303179/2023-12-16_c0b3978e7beb7.png">

pintura

consolas

papelera mini