RichardB80

MakerVerse Designs

A Gardena to ¾ inch thread adapter<ul><li>the Adapter is printed in PLA or PETG</li><li>the Sealings are printed in TPU</li></ul>Have fun with it and leave a like or subscribe if you like it!If there are any suggestions for improvement, feel free to write a comment.

Gardena Adapter - to 3/4 inch thread

technical parts

Diadm

Here is a modern version of my self-watering pot for plants. It is equipped with a gauge to check the water level at a glance. It can actually support 8 20mm baskets. I'll add more sizes in the following days. I also add a little funnel in the middle to make infill more easy.This pot is designed on the hydroponic principle, so care must be taken to maintain the same level of water.<h4> Instructions : </h4>Print the tanker with an 20 % infill, 15 minimum Holder, baskets and gauge can be printed with a 10% infill, ideally 15 for the gauge. I print it at 150mm/s because my printer can do it but 90 or 60 mm/s do the job It works with PLA but PETG for the tank ensures long-lasting watertightness&nbsp;Feel free to leave a comment to ask questions, make suggestions or other. Don't forget to post your make !

Modern self-watering plant pot

plants

Golub17

This is a collection of 28 very simple egg models, all very similar, but everyone likes something different. Just pick the ones you like and put them in a basket. - choose the surface pattern you like - choose the density you like  - choose the twist you like Please do not move them around the printbed in the slicer. This will break the perfectly centered infill. If you wish to print more per plate, use print sequence by object. But at this point, I assume that you know what you are doing.  More print profiles for bigger machines are appreciated, if you wish to create one.

28 Simple Decorative Eggs

easter

Jorge Rui

<h3>Introduction</h3><blockquote>3mf files are for use only on bambu studio and Orca Slicer - Latest version. Step files are available for the most excellent Prusa Slicer and others.</blockquote>&nbsp;This is my idea of a keychain. The tags are large, and the colors are bright, so maybe it's not so easy to miss. <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354015/2023-10-10_xyhck86v113n.jpg"></figure>This keychain is an elegant, highly customizable, and practical solution. Who has ever used a traditional keychain closet, knows that it is not always easy to put the keys there.<figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354015/2023-10-10_gh7m00henasp.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354015/2023-10-10_et9ho9yhlkf7.jpg"></figure></td></tr></tbody></table></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354015/2023-10-10_kktrixy3yq5q.jpg"></figure>It can be used with the tags, but also with simply the key (as long as they have some iron on it). It works with the magic and invisible magnetic force, if the keys are from brass to aluminum, the solution is to use one of the available tags. <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354015/2023-10-10_73tz8bljc3ut.jpg"></figure><h4>Smart</h4>For those who are in the home rental business, or have a home with home automation, I also added the possibility to add an <a target="_blank" href="https://en.wikipedia.org/wiki/Radio-frequency_identification" rel="nofollow noopener">NFC</a> Tag to each of the keychain docks. This way, you can give directions to your guest or automate something every time you bring your <a target="_blank" href="https://en.wikipedia.org/wiki/Radio-frequency_identification" rel="nofollow noopener">NFC Tag </a>reader close to the dock. If you don't find this interesting, just don't use the NFC Tag ;)ChallengeI leave here a challenge to those who are more comfortable with electronics, namely using and programming the <a target="_blank" href="https://en.wikipedia.org/wiki/ESP32" rel="nofollow noopener">ESP32</a>. If anyone is interested in collaborating in order to put a microcontroller in the dock, please contact me. The idea that by putting the key on the keychain and start an action is interesting. (this, of course, without using the mobile phone). NFC Tag was the simplest way I found to enable this kind of interaction, but you always need a mobile phone nearby… Well, it's not bad, but an ESP32 will be better, but then we have the battery problem… ;)<h4>How it works</h4><ol><li>Simply hold the tag or key close to the dock and the magical magnetic force will do the rest. </li><li>If you are already in the future, whenever you think it is necessary, you can bring your phone close to the dock and trigger a set of actions. I know that with iOS this is very easy through the automations in the Shortcuts app, and I'm sure that on Android it won't be difficult either. Regardless of the system and in a universal solution, <a target="_blank" href="https://www.home-assistant.io/" rel="nofollow noopener">Homeassistant </a>works great with ID tags.</li></ol>But enough about automation, that was something I decided to add and that wasn't the reason I made this keychain. <h4>Available variations</h4><ul><li>Colors for ID the dock and the tags, choose any colors you like.</li><li>3D printable labels on the dock (Garage, House, Office and Mailbox). Some more could be available for members. This you have to download here, they can be remixed, that way you can add your text.</li><li>Version to add labels as stickers.</li><li>A dock version to hang.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354015/2023-10-10_7j5oec22wkpa.jpg"></figure><h3>Print instructions</h3>This project is designed to make printing easy, but there are a few things you should take into consideration.The tag has a neodymium magnet embedded in it. Therefore, it will be necessary to program a pause in the last layer where the pocket where the magnet is inserted is closed.<figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/354015/2023-10-10_1p5q6bf8f69w.jpg"></figure>These files can be remixed, so the copyrights of does is different from this one, the only way I know to make this is by creating a new project.You can download here:<ul><li><a target="_blank" href="https://makerworld.com/en/models/38287" rel="nofollow noopener">Tags and Labels for the Keychain</a></li></ul><h3> </h3><h3>Assembly instructions</h3><ol><li>Print the parts.</li><li><a target="_blank" href="https://amzn.to/46irZ3A" rel="nofollow noopener">Get some neodymium magnets </a>and, if you want, some <a target="_blank" href="https://amzn.to/3rKJif0" rel="nofollow noopener">NFC Stickers</a>.</li><li>Assemble the dock (this example is good for all version.<ol><li>Force the magnet on its socket (can help push it against a piece of wood, don't use metal, the magnet will break).</li></ol></li><li>The name label on the top will press fit.</li><li>For better adhesion of the parts, you can use double-sided adhesive tape. <ol><li>Something like <a target="_blank" href="https://amzn.to/3rTK3Cp" rel="nofollow noopener">this</a></li></ol></li><li>If needed, you can glue it all.</li></ol><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354015/2023-10-10_r26u97h2ahzx.jpg"></figure> 6. If you go for the rail fixing, please choose one of the configurations available on the 3mf file. Remember that you can use the cut function on the slicer. <figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=nyevb4B_NB8"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/nyevb4B_NB8" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure><h3>Material</h3><ul><li><a target="_blank" href="https://amzn.to/46irZ3A" rel="nofollow noopener">2x neodymium magnets of 10x3mm</a> (one for the dock, other for the Tag)</li><li><a target="_blank" href="https://amzn.to/3rKJif0" rel="nofollow noopener">1x NFC sticker Tags</a> (if you plan to use them)</li><li>For the rail fixation, you will need bolts of about 4mm in diameter. </li><li>For a small help, use this affiliate link to buy filament, it will cost you the same. Thanks ! <ul><li><a target="_blank" href="https://shareasale.com/r.cfm?b=2354730&u=4026304&m=138211&urllink=&afftrack=" rel="nofollow noopener">Filaments used on this project</a></li></ul></li></ul><h4> </h4><h4>Development</h4>I think it might be interesting to show what's behind a finished product, so from this project onwards I can include some information regarding product development. Give some feedback if you find it interesting or if you find this irrelevant.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354015/2023-10-10_nk7t1q5kb3pq.jpeg"></figure><h3>Change log:</h3><ul><li>(12-10-2023) - Added blank labels; download file: “Name_blank.step” and “Tag_blank.step”.</li></ul><figure class="table" style="width:97.1%;"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td><figure class="image image_resized" style="width:81.16%;"><img src="https://makerworld.bblmw.com/makerworld/draft/354015/2023-10-12_8cc3cc988b56e.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354015/2023-10-12_d7a7c61134e7e.jpg"></figure></td></tr></tbody></table></figure><h4>Support the designer:</h4><ul><li>This design is free for the benefit of the community, but If you like my designs and want to contribute, you can make a donation to <a target="_blank" href="https://www.buymeacoffee.com/designrepcom" rel="nofollow noopener">buymeacoffee </a>or <a target="_blank" href="https://www.paypal.com/donate/?business=BUM67EMDJRXSN&no_recurring=0&currency_code=EUR" rel="nofollow noopener">paypal, </a>or even better, join “My Club” here in printables.com, that will be greatly appreciated.</li></ul><a target="_blank" href="https://www.printables.com/@jorge_rui" rel="nofollow noopener">And check my other projects, maybe you find there something usefull</a>

Keychain and Tags

storage

oizopetr

The printout consists of two parts. Heart print sheets to mat. Print the base on the side for better strength. The opening for the bottle is 80 mm.

Heart shaped wine bottle holder.

wine

Llλmbda

Edit: added a second plate for Lid without supports as requested by user, added new plate for different orientation of spots, added new plate for one piece flower body if anyone wants to AMS multicolor it Yet ANOTHER Mario themed piggy bank model! This time we have a GIANT 2ft tall piranha plant floor bank! This model was originally meant to be a coin sorter as well but after many failed iterations I decided to just have it be a spiral ramp as all the designed I tried I could not acheive 100% success on the coin sorting. This piggy bank is LARGE and has many parts!  This is not meant to be a toy or moved around constantly and is meant more as a floor decor piece that you can throw loose change into as you walk in. Printing in orientation provided will be successful but will leave some slight blemishes on the underside of the rounded edges. Once everything is assembled these areas are hardly noticeable so its user choice of if you would rather have a slightly wonky bottom that can probably be nailed with great supports, or a seam where you glued the pieces together. Cut versions are provided on seperate plates All connectors have a tolerance of .2mm and should fit easily into the provided holes, glue both halves of the ramp together as well as the bottom piece. Glue your spots onto your flower body, then attach the plant lips to the flower body, mine fit so snugly in place I didn't even have to glue it. Slide your flower body over the top of the coin funnel and it should fit into place with some slight persuasion, once that is seated and glued you may then add the top of the coin funnel to the ramp. Glue your teeth in place and youre good to go!  If you're worried about stability you can glue the entire vine into the top of the lid to hold it in place. Happy Printing!

Mario Piranha Plant Large Spiral Piggy Bank

fun models

Gary Riches

I'm fine with the shorter paddles, but always accidentally knock the long ones. I wanted something to use them to capture video, so made these stubby back paddles for infrequent use.Should work with the Series 1 or 2.<h3>Print Settings</h3>Printer Brand:PrusaPrinter: <div>I3 MK3S</div>Rafts:NoSupports: <div>Yes</div>Resolution:0.1Infill: <div>40%</div>Filament:Generic PLA Black Notes: <div>Printed 0.1 layer height with supports for the part inserted in to the controller. It's a snug fit and stays in super well.</div>Category: Video Games

Elite Series 2 Xbox Controller Paddle

xbox

angry-p1p

Surprise your loved one with this sweet Geodude. The design even works without the low poly heart which is on a separate build plate.&nbsp;Assembly is very easy - just glue the heart in place with a few drops of super glue.&nbsp;I tried to avoid using supports as much as possible, but unfortunately it's not possible without them - I used Sunlu PLA +, tree supports and “support critical regions only” and max cooling and aux fan speed.&nbsp;My support settings:<figure class="image image_resized" style="width:24.99%;"><img src="https://makerworld.bblmw.com/makerworld/draft/532620/2024-01-31_6aec708158eba.jpg"></figure>&nbsp;Default size is 93x54x100mm.&nbsp;RAW .stl for non Bambu Users available! <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/532620/2024-02-13_9ed7d46333a48.jpg"></figure>&nbsp;&nbsp;No AMS Version:&nbsp;<figure class="image image_resized" style="width:32.21%;"><a href="https://makerworld.com/en/models/165611" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/532620/2024-01-31_2d3d1eb57a89b.jpg"></a></figure>&nbsp;Articulated Dratini: <figure class="image image_resized" style="width:42.52%;"><a href="https://makerworld.com/en/models/147391" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/532620/2024-01-31_29116025aa192.jpg"></a></figure>&nbsp;&nbsp;&nbsp;

Geodude Valentines Edition - Multicolor

Pokemon

ironspork

A 3x3 printable gridfinity insert that holds the basic X1C stuff.

Gridfinity Bambu X1C Basic tools

gridfinity

Kerlou

Muticolors Traditional bridge inspired by Japanese architecture. It is very easy to print and no AMS needed.It can be a very good interior decoration element, you can put it in a Zen garden or on a shelf. It can also be a good gift or a miniature game item.&nbsp;For plate 1 : change filament at layer 23 from red to black.The spheres should be glue on top of the barriere (they are 2 more in case of losses)For plate 2 : change from black to red at layer 7. (Be warning the fisrt layer is not easy to print).&nbsp;To assemble the bridge you just have to bend the ground part and place the barrieres in the holes :)&nbsp;Do not hesitate to leave me a comment, it would make me very happy and you can check my profile to see more files. I hope you like this model :)

Japanese Bridge without AMS

japan

MottN.

Uses the void area in the AMS molding to stabilize the brackets to keep your build plates next to the AMS. I use this on the right side with my my side mount spool holder mounted to the left side of the AMS. &nbsp;Print two of whatever version or combinations you choose. You can just print the build plate holder parts or ones with the tool holders.

AMS side buildplate holder for X1c and P1S

ams buildplates

brody.bolanos

<h2>Description</h2>AirTag Holder&nbsp;Designed multiple options for an AirTag Holder.<blockquote><h2>Folders & Files</h2></blockquote><ol><li>Top Name Plate<ol><li>V1 Top Name Plate</li><li>V2 Top Name Plate</li></ol></li><li>Ocean Top<ol><li>V1 Top Ocean</li><li>V2 Top Ocean</li></ol></li><li>Mountains Top<ol><li>V1 Top Mountains</li><li>V2 Top Mountains</li></ol></li><li>Make My Sign Top<ol><li>V1 Make My Sign</li><li>V2 Make My Sign</li></ol></li><li>Standard Top and Bottom<ol><li>V1 Top</li><li>V1 Bottom</li><li>V2 Top</li><li>V2 Bottom</li></ol></li></ol><blockquote><h2>Print Plates</h2></blockquote><figure class="image image_resized" style="width:56.05%;"><img src="https://makerworld.bblmw.com/makerworld/draft/321769/2023-12-06_91ff095f8ac3f.jpg"><figcaption>MOUNTAINS TOP</figcaption></figure><figure class="image image_resized" style="width:56.48%;"><img src="https://makerworld.bblmw.com/makerworld/draft/321769/2023-12-06_e47e630257847.jpg"><figcaption>OCEAN TOP</figcaption></figure><figure class="image image_resized" style="width:56.1%;"><img src="https://makerworld.bblmw.com/makerworld/draft/321769/2023-12-06_a82bc7fb09b3e.jpg"><figcaption>NAME PLATE TOP</figcaption></figure><figure class="image image_resized" style="width:56.53%;"><img src="https://makerworld.bblmw.com/makerworld/draft/321769/2023-12-06_0e8daee815fa5.png"><figcaption>MAKE MY SIGN TOP</figcaption></figure><figure class="image image_resized" style="width:59.58%;"><img src="https://makerworld.bblmw.com/makerworld/draft/321769/2023-12-06_4f3b6ec04a7e1.png"><figcaption>STANDARD TOP AND BOTTOM</figcaption></figure><blockquote><h2>Print Settings</h2></blockquote><ol><li>Set your K calibration and adjust setting based on your filament<ol><li>This is important because if the surfaces are not smooth the parts will be difficult to put together.</li></ol></li><li>See Global and Object tab in the print profiles for the rest of the settings.</li></ol><blockquote><h2>Assembly</h2></blockquote>Overview<ul><li>There are two main designs, V1 and V2. The holes are oriented differently depending on how you want AirTag to hang. V1 works well for things like dog collars and V2 works well on keychains. </li></ul><figure class="image image_resized" style="width:48.85%;"><img src="https://makerworld.bblmw.com/makerworld/draft/321769/2023-12-06_428becbbbdfdd.png"><figcaption>V1 V2</figcaption></figure>Any V1 top will work with a V1 bottom. Any V2 top will work with a V2 bottom.&nbsp;Mountain, Ocean, and Name Plate Prints Notes:<ul><li>To customize, add the desired text to the top (the text needs to be imbedded as the model prints face down) and change the colors in Bambu Studio. The height of the customizable surfaces are .6mm / 3 layers.<ul><li>Make sure to keep the object settings in Bambu Studio. The customizable face plates ( Mountain, Ocean, & Name Plate) need to be printed seperatly from the Standard Top & Bottom print file due the models have Height Range Modifiers.</li></ul></li></ul>Make My Sign Notes:<ul><li>The supports for the print are a little difficult to remove. I tested different support styles and this setting provided the best results when the supports are removed. I used a small flat head bit to wedge in-between the top piece and the support then twisted the flat head to separate the support. </li><li>To create the sign, use <a target="_blank" href="https://makerworld.com/en/makerlab/makeMySign" rel="nofollow noopener">https://makerworld.com/en/makerlab/makeMySign</a> <ul><li>Change the base plate style to the circle </li><li>Make the height 1mm</li><li>Change the size of the circle to 32.12mm<ul><li>A size of 32.12 - 32.15mm circle should provide a secure fit when the plate is pressed into the top. </li><li>You can also add a small dab of CA / Superglue to secure it in place, but I haven't needed to do that. </li></ul></li></ul></li></ul>Instructions:<ol><li>Download the Standard Top and Bottom print file.</li><li>Decide which style you want to print (v1 / v2) and if you want to print all for or just the bottom model. </li><li>Print!</li><li>Next, choose and download which top you want to go with.</li><li>Make sure to print the correct top that matches the bottom ( V1=V1, V2=V2).</li><li>Print!</li><li>If you are using the Make My Sign model follow the instructions above. Once download you can add the STL to one of the bottom print files or print it seperatly.<ol><li>I printed it seperatly and ironed the top surfaces. </li></ol></li><li>To assemble just simply rotate the top and bottom together until it snaps into place.<ol><li>Facing the bottom piece, line up the top and bottom then rotate the bottom ~45 degrees counter-clockwise. The bottom should fall into place then rotate the bottom clockwise until the pieces snap into place. </li><li>Before adding the AirTag, rotate the pieces together back and forth a few times to smooth out the movement.</li></ol></li></ol>If you have any questions or problems please leave a comment and I will try to help resolve the issue.&nbsp;