Bremo

gare-sb

Another heavy metal logo. This time Motörhead

Motörhead Logo

coś ktoś

lucamoretti86

ModelDo NOT adjust the size in your slicer!! The layers will not come out right. Do not change the size, this will cause errors in color change compromising the entire print. Use my print profile or you will not get the desired results. It can be printed safely without AMS and on any printer. I hope you like it, I hope you like it, if you want to support me leave a like and vote five stars thank you!&nbsp;Nozzle: 0.4Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Basic Gray Transmission Distance: 2 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Matte Mandarin Orange Transmission Distance: 3 PLA BambuLab Basic Jade White Transmission Distance: 5Swap Instructions: Start with Charcoal At layer #8 (0.72mm) swap to Gray At layer #10 (0.88mm) swap to Jade White At layer #16 (1.36mm) swap to Charcoal At layer #18 (1.52mm) swap to Mandarin Orange At layer #26 (2.16mm) swap to Jade White for the rest.

coś ktoś

hueforge