TheProductResearchers

Filament Display

larsn

This is a slightly different version of the official command strip mount for the Multiboard (as of March 24).It has two push fits, that have been slightly scaled down (x0.975 on x and y axis) to generate a less pushy fit. This way it is easy to mount and remove the tiles. The push fits also have been elongated (x1.1 on z-axis) to make it come flush with the dual and quad snap connectors (link below). To fix the tiles, one can use the 9mm flat head small thread bolts (link below).The two push fits fit into the standard clips horizontally or vertically. I also made another version that fits diagonally.The base of the model is 4mm think, which adds to the 4mm of the strips I use to have the standard 8mm offset. Print the part with the base down. This is not super high strength due to the layer line orientation, but I figured the command strips will fail first. Standard settings are fine. I used 3 walls as in all Multiboard prints (but that is probably not crucial).&nbsp;&nbsp;link to Dual and Quad Snap connectors: <a target="_blank" href="https://thangs.com/search/%22MB14%22%20creator%3A%22Keep%20Making%22?scope=thangs&view=compact-grid&affiliateCode=tnl" rel="nofollow noopener">https://thangs.com/search/%22MB14%22%20creator%3A%22Keep%20Making%22?scope=thangs&view=compact-grid&affiliateCode=tnl</a><a target="_blank" href="https://thangs.com/designer/Keep%20Making/3d-model/Quad%20Snap%20Connector-974291" rel="nofollow noopener">https://thangs.com/designer/Keep%20Making/3d-model/Quad%20Snap%20Connector-974291</a>&nbsp;link to 9mm flat head small thread bolts: <a target="_blank" href="https://thangs.com/designer/Keep%20Making/3d-model/9%20mm%20Small%20Thread%2C%20Flat%20Head%2C%20Bolt-974190" rel="nofollow noopener">https://thangs.com/designer/Keep%20Making/3d-model/9%20mm%20Small%20Thread%2C%20Flat%20Head%2C%20Bolt-974190</a>&nbsp;

Multiboard command strip mount 2 push small thread

multiboard

vitaprint 3D

This is a perfect Box for your Bambu Lab Spare Parts. I made all Bambu Lab printer Models to a Lid Design.You need foloowing Screws to complete it:&nbsp;<ul><li>M3 x 30 = 4 pcs (for the Hinges)</li><li>M3 x 35/40 = 2 pcs (for the Handle)</li></ul>&nbsp;Big Box:230 x 210 x 70<a target="_blank" href="https://makerworld.com/en/models/105260" rel="nofollow noopener">https://makerworld.com/en/models/105260</a>230 x 210 x 140<a target="_blank" href="https://makerworld.com/en/models/92348" rel="nofollow noopener">https://makerworld.com/en/models/92348</a>&nbsp;Small Box:175 x 130 x 110:<a target="_blank" href="https://makerworld.com/de/models/97173" rel="nofollow noopener">https://makerworld.com/de/models/97173</a>175 x 130 x 70:<a target="_blank" href="https://makerworld.com/de/models/408354" rel="nofollow noopener">https://makerworld.com/de/models/408354</a>

Bambu Lab Box L A1 Mini / P1S / A1 / P1P / X1C

borjasardo

Temperature Tower ABS-ASA 230 to 270

Temp Tower ABS-ASA 230-270

Testing

ppastur

I needed to replace a wheel nut cover for my car. I searched for an existing design and couldn't find a match. I took inspiration from a design by ceptimus (<a target="_blank" href="https://www.thingiverse.com/thing:4343996" rel="nofollow noopener">https://www.thingiverse.com/thing:4343996</a>) and designed one to fit my Audi A3, S3, RS3 8V<h3>Print Settings</h3>Printer:Anycubic Kobra, Bambu P1SRafts: NoSupports:YesResolution: 1.2Infill:15%Filament:eSun PLA+White Bambu ABS Black&nbsp;Post-Printing =============CosmeticsI filled, sanded and painted the part to look like the original part.&nbsp;&nbsp;Category: Replacement Parts

Audi A3 wheel nut cover

4D Maker Lab

&nbsp;Matching Window Exhaust: <a target="_blank" href="https://makerworld.com/en/models/69555#profileId-73894" rel="nofollow noopener">3" Hex Guard Window Exhaust Adapter for X1C and P1S Exhaust manifold</a> Inhouse designed and used in our print farm, tailored for use with <a target="_blank" href="https://www.amazon.com/Hon-Guan-inch-Air-Duct/dp/B07QK6FVNX?crid=27XSADKFT7LO3&keywords=3%22%2Bducting&qid=1700528022&sprefix=3%2Bducting%2Caps%2C204&sr=8-5&th=1&linkCode=ll1&tag=4dmakerlab0f-20&linkId=4a8f3179bd85fb41cf55ab85a2190c78&language=en_US&ref_=as_li_ss_tl" rel="nofollow noopener">3" ducting</a>, this adapter seamlessly integrates with P1S and X1C models, providing an efficient solution for expelling toxic fumes.&nbsp;Compared to other designs, ours overlaps the whole exhaust of the X1C and P1S for the best fume extraction without any other fans needed.&nbsp;Featuring <a target="_blank" href="https://amzn.to/3GfpbsN" rel="nofollow noopener">6x3 magnet</a> holes, press-in, installation is a breeze.&nbsp;&nbsp;Exhaust to window supply list:<a target="_blank" href="https://www.amazon.com/Hon-Guan-inch-Air-Duct/dp/B07QK6FVNX?crid=27XSADKFT7LO3&keywords=3%22%2Bducting&qid=1700528022&sprefix=3%2Bducting%2Caps%2C204&sr=8-5&th=1&linkCode=ll1&tag=4dmakerlab0f-20&linkId=4a8f3179bd85fb41cf55ab85a2190c78&language=en_US&ref_=as_li_ss_tl" rel="nofollow noopener">3" Hose Ducting</a> on amazon.com<a target="_blank" href="https://www.amazon.com/Adjustable-Stainless-Steel-Clamps-Ducting/dp/B07PQDRFVH?crid=QYL47T5BV2CU&keywords=3%22clamp&qid=1701148158&sprefix=3%2Bclamp%2Caps%2C177&sr=8-5&th=1&linkCode=ll1&tag=4dmakerlab0f-20&linkId=d125afd34f6093bbdb6d9da06148fd26&language=en_US&ref_=as_li_ss_tl" rel="nofollow noopener">3" Hose Clamps</a> if you splice the hose for additional printers, the ducting kit already includes 2 clamps. amazon.com<a target="_blank" href="https://www.amazon.com/DIYMAG-6x3mm-Refrigerator-Premium-Brushed/dp/B07KZQGWNN?crid=1MEFXMMAYC38N&keywords=6x3%2Bmagnet&qid=1700528077&sprefix=6x3%2Bmagnet%2Caps%2C146&sr=8-1-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&th=1&linkCode=ll1&tag=4dmakerlab0f-20&linkId=91b5696e566ebcbb3cc397c4500120d9&language=en_US&ref_=as_li_ss_tl" rel="nofollow noopener">6x3 Magnet</a> on amazon.com<a target="_blank" href="https://amzn.to/3Gr15vr" rel="nofollow noopener">Plexi Glass Sheets</a> to cover the rest of the window for a more permanent solution, you can easily cut based on your setup.&nbsp;Window Exhaust connector: <a target="_blank" href="https://makerworld.com/en/models/69555#profileId-73894" rel="nofollow noopener">3" Hex Guard Window Exhaust Adapter for X1C and P1S Exhaust manifold</a> on makerworld.com &nbsp;&nbsp;Your support is greatly appreciated as it enables me to offer models for free. If you choose to make a purchase through any of the provided links, I may earn a commission. Thank you for being a vital part of this endeavor.

3" Exhaust Manifold - P1S and X1C Compatible

Air Extraction

Hamstah

Print-in-place planetary gear spinner. Spins freely straight off the plate.&nbsp;I set up two print profiles for this model: Heavy outer ring - prints using 43g of filament to make the outer ring heavier. This gives it a bit more inertia, but feels heavier in the hand.Light outer ring - prints using 29g of filament. Feels lightweight in the hand and prints faster, but doesn't have as much inertia.&nbsp;Both spin great - I'd say pick the print profile based on how you want it to feel in the hand.

Print in Place Planetary Gear Spinner

Cool Stuff

benlevi

<h2>BLV - AMS Riser for X1C V3.1 Final</h2><figure class="table"><table><tbody><tr><td style="background-color: hsl(0, 0%, 30%)"><h3>Introduction</h3></td></tr><tr><td>I&#39;m Ben Levi, and I want to talk to you about this BLV AMS Riser that I designed: So, when the AMS is sitting on top of the printer, you can&#39;t really see what the printer is doing, and you can&#39;t even open the top glass cover to let some air in when you&#39;re printing High temp stuff. basically, something that will hold the AMS and free your Glass top cover will be a good solution for that. Now I&#39;ve seen some similar AMS risers before, but none of them really wowed me.. i think..That&#39;s why I decided to come up with this sleek BLV AMS Riser design, easy to use, easy to put together, and reliable. I even added two handy drawers for your tools and stuff, a special shelf that can hold up to 4pcs Build Plates, built-in Dual LED strips. Sure, it took me a while, but I got it (almost..) done.As some of you may know, I love contributing to this wonderful community, which is why I chose to share with you my project without any fee or money. Among other things, I&#39;ve also given you access to the original CAD files (F3D,STEP) so that you can easily make changes, add, and improve as you see fit. Please, if you publish a remix, make sure to link it to the original project as a remix so that others can benefit from your effort. I kindly request not to use the files for commercial purposes without explicit permission from me.&nbsp;Thanks, Ben Levi<a target="_blank" href="https://www.paypal.com/paypalme/BenBLV" rel="nofollow noopener">If you want, buy me a beer </a>:)&nbsp;</td></tr></tbody></table></figure><figure class="image image_resized" style="width: 58.95%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-09-25_370cc55ef0c1d.png"></figure><h2>Main features</h2>These are just a few design features I&#39;ve planned. If you have more ideas, please share them with me, and I can incorporate them into the design. Also, feel free to add remixes (CAD files are available for download).<ul><li>Easy installation</li><li>Dual LED strip installed in optimal angle for LiDAR.</li><li>AMS riser</li><li>Top glass Holder</li><li>2 drawers for tools (with version for tools)</li><li>4 x Build Plates holder</li><li>Rubber Gasket for the glass</li><li>Customised Panels</li><li>access to original buttons</li><li>No screws required</li><li>CAD files available (F3D,STEP)</li></ul><figure class="table"><table><tbody><tr><td>&nbsp;<figure class="image image_resized" style="width: 92.39%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_18d41f48cf37f.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_a237ff37d0da5.png"></figure></td></tr></tbody></table></figure><h2> </h2><h2>How to print and where to begin?</h2>I must admit, if you&#39;re in search of a quick two-hour print and you&#39;re finished, this may not be the right place for it. To initiate and successfully complete this project, a considerable amount of filament and time investment is necessary. Here are the essential resources you&#39;ll be required to invest:<figure class="table" style="width: 70.13%"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td>Printing Time</td><td>70~85 print hours - including color switching!</td></tr><tr><td>Printer</td><td>X1 Carbon, P1S, P1P, X1 or Other + AMS (Optional).</td></tr><tr><td>Filament</td><td><ul><li>2 kg - PLA/PETG Main filament color (GREY)</li><li>0.5 kg - PLA/PETG Secondary filament color (GREEN)</li><li>14 g - PLA/PETG Black filament for text (BLACK)</li><li>34 g - TPU flexible filament for your Gasket (BLACK)</li></ul>* Feel free to choose your own colors.</td></tr><tr><td colspan="2"><figure class="image image_resized" style="width: 98.07%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-04_77b29f1dbec36.jpg"></figure></td></tr></tbody></table></figure>I tried to keep the project in as few parts as possible and minimize the use of screws and glue. I&#39;ve also included three images that show all the parts and file names to help you easily know what to print and what to remove. Click on the pictures to enlarge.<figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_5539d72c1e42.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_1698b67225759.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_34f66213cbfb2.jpg"></figure></td></tr></tbody></table></figure>&nbsp;&nbsp;<h2>Printing settings</h2>Under each file name, I&#39;ve added a recommendation on how to print that component. Please note that these are just suggestions, and you can choose the filament type, infill percentage, and wall count according to your preferences.Additionally, I&#39;ve attached an image below that illustrates how to orient each component on the print bed for optimal results (click to enlarge):<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_c8a5b6a960393.jpg"></figure>Please note that you will find in also wonderful print profiles from the community too :)<h2> </h2><h2>Assembly instructions</h2>I think the best way to demonstrate the assembly is through a video. Therefore, I&#39;ve created a short animation video for you that illustrates the assembly process and the sequence of the project&#39;s components. Enjoy:<h3> </h3><figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_f7b5fb7649351.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_0604a5a98bf6d.png"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_4edcdff3d535e.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_f3764fb52c104.png"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_7b9abe53ec9f3.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_611a02308f5c5.png"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_d8d2275f63acd.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_f59c54b41a2bd.png"></figure></td></tr></tbody></table></figure><h3>Buttons assembly:</h3>Please print x2 Button insert.stl files and assemble as the photo below:<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-09-29_89172a00d321c.jpg">&nbsp;<h2>Recommended Remix:</h2><ul><li><a target="_blank" href="https://makerworld.com/en/models/27690#profileId-24067" rel="nofollow noopener">Front Panels for P1P remix</a></li><li><a target="_blank" href="https://makerworld.com/en/models/28098#profileId-24385" rel="nofollow noopener">new Drawers with Clean look and version with Text</a></li><li><a target="_blank" href="https://makerworld.com/en/models/28948" rel="nofollow noopener">Spool Holder add on on the rear</a></li><li><a target="_blank" href="https://makerworld.com/en/models/29315" rel="nofollow noopener">Honeycomb panels for the sides</a></li></ul><h2>Links:</h2><ul><li><a target="_blank" href="https://s.click.aliexpress.com/e/_Dk1tOEL" rel="nofollow noopener">COB 5mm Dimmable LED strip</a> suitable to the project. please make sure to choose: “white” and “Strip-USB Button” options.  </li></ul><h2>Colors ideas:</h2><figure class="image image_resized" style="width: 59.65%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_5f2218eae1ea7.jpg"></figure><h2>How to download CAD (f3d,Step) files: <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-03_16ad19d8f61ba.jpg"></h2><h2> </h2><h2>Selected User makes:</h2><figure class="table" style="width: 90.79%"><table class="ck-table-resized" style="border: 1px solid hsl(0, 0%, 100%)"><colgroup><col><col><col></colgroup><tbody><tr><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-04_3aaa07d5a3c1e.png"><figcaption>click to enlarge</figcaption></figure></td><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 86.34%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-03_f5f9b0b8d1086.jpg"><figcaption>click to enlarge</figcaption></figure></td><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-03_ee05726581f83.jpg"><figcaption>click to enlarge</figcaption></figure></td></tr><tr><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_8efeadcf004be.jpg"><figcaption>click to enlarge</figcaption></figure></td><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 79.61%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-04_c0866329e4121.jpg"><figcaption>click to enlarge</figcaption></figure></td><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 92.92%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_f106d497bd601.jpg"><figcaption>click to enlarge</figcaption></figure></td></tr><tr><td style="border: 1px solid hsl(0, 0%, 100%)" colspan="3"><figure class="image image_resized" style="width: 94.67%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_d8fbe88a9ea.jpg"><figcaption>click to enlarge</figcaption></figure></td></tr><tr><td style="border: 1px solid hsl(0, 0%, 100%)" colspan="3"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_0d0d9ff1ec084.jpg"><figcaption>click to enlarge</figcaption></figure></td></tr></tbody></table></figure>&nbsp;<figure class="table"><table><tbody><tr><td style="background-color: hsl(0, 0%, 60%)"><h2>Changelog</h2></td></tr><tr><td><ul><li>19/9/23 - published first prototype. not meant yet to print.</li><li>19/9/23 - uploaded v1.1 with angled glass holder and fixed Size drawer, stronger rear part.</li><li>23/09/23 - Left/Right/Rear Panel edges optimization for better surface finish.</li><li>24/9/23 - Huge update v1.2 !<ul><li>Extreme optimization to main parts, now it&#39;s 6 parts but much less support and faster to print.</li><li>Added wire channel for the LED&#39;s wires.</li><li>Added lock pins to TPU gasket.</li><li>new secure method to front and rear parts in addition to the dovetails.</li><li>Optimization to all decorative panels.</li><li>2 x Button frame cover with logo for P1P and P1S.</li><li>increased glass holder degrease to prevent movements.</li><li>Deeper AMS leg&#39;s socket, securing the AMS in it&#39;s place.</li><li>Added special drawer with accessories. it has a place for the H1.0-H2.0 HEX keys, 2 x Hotends, 5 cutters, 4 x wipers, screws, glue and needle.</li></ul></li><li>25/09/23 - updated new version 1.3 with measurements fix.</li><li>29/9/23 - added 2 remixes: clean front drawer, drawers with text, Dash front parts for P1P.</li><li>29/9/23 - added Button insert.stl + button images assembly.</li><li>30/9/23 - remix section update! spool holder, honeycomb panels added.</li><li>4/10/23 - New optimized slicing profile! faster, less filament, better support!</li><li>02/03/24 - added more support to side model.</li><li>04/04/24 - changed print profile for wider base.</li><li>22/05/24 - optimized structure for vibrations.</li><li>31/05/24 - changed Internal structure to be more rigid.</li><li>29/06/24 - added BOM items  </li></ul></td></tr></tbody></table></figure>

BLV - AMS Riser for X1C / P1P / P1S V3.1 Final

P1S Accesories

jr2142

I came up with this dry box holder after using 22L Samla boxes for a while to store my filament. Here are the advantages of using a 45L Samla box instead:<ul><li>It fits up to 10 spools compared to the 8 spools in 2x22L boxes while requiring the same space</li><li>Filament swaps are less of an hassle as the likelihood of having to open multiple boxes is at least halved</li><li>The setup is cheaper, as 2x22L boxes are more expensive than 1x45L</li></ul>The 45L box is perfect for PLA and PETG, I have between 40-50% humidity in my area and with desiccant I can store it below 20% for 6+ months depending on how frequently I have to open the box. I still use 22L boxes for hygroscopic material like Nylon, TPU or PVA, but with a <a target="_blank" href="https://makerworld.com/en/models/226204#profileId-243947" rel="nofollow noopener">gasket</a>.<h4>Change Log:</h4><ul><li>2024-03-29 v1.1: Added loose fit variant of connectors and original tight ones are printed in PETG now</li><li>2024-02-24 v1.0: Initial release</li></ul><h4>Features</h4><ul><li>This design has been optimized to minimize waste of filament<ul><li>One frame piece is 30g which is possible as it is only there to position the rod holders</li><li>The complete print is 215g, that is less than many 22L spool holders out there</li></ul></li><li>The rods have been tested with double the load (5 stacked spools instead of 2.5 per section) for multiple days</li><li>The rod holders are designed to leverage the additional space in the upper part of the box, generating the required space to fit 10 Bambu spools</li><li>Optimized for loose desiccant as you can more easily see the color-change. Use the clips to easily get the frame out in one piece, when it is time to dry the desiccant</li><li>Includes a hygrometer holder that is angled 45 degrees to be easily readable, when the box is on the floor</li></ul><h4>Printing instructions</h4>Note that the design requires a print bed of 250x170mm or bigger. You could split the frames in the middle, though. Print each plate in the profile once, except the last two. The last two plates are containing connector clips and hygrometer holder, which are optional. The tight fit variant is designed to be printed in PETG and the loose fit variant for PLA. Here are the key settings should you use another slicer than Bambu Studio:<ul><li>Print the frame with two perimeters/walls at 0.28mm layer height and 15% cubic infill</li><li>Print the rods with 4 perimeters at 0.28mm layer height and 25% cubic infill and <a target="_blank" href="https://www.youtube.com/watch?v=qBvTWFEd7rk" rel="nofollow noopener">reduce the speed</a>, if you have a high-speed printer with stock nozzle</li><li>Print the hygrometer holder with 0.16mm layer height and 15% infill, it has been designed to print without supports, but there is a small overhang benefiting from the lower layer height<ul><li>The tight fit connectors are recommended to be printed in PETG. PLA does work, but requires proper flow calibration and the latches of the connectors might break apart when not assembled carefully</li><li>Loose fit connectors can be printed in PLA</li></ul></li></ul><h4>Assembly</h4><ul><li>Put the 4 frames together as shown in the assembly view below or use the assembly view in your slicer</li><li>Put the 4 rods together and install them onto the rod holders. Note that the angled side of the rod holders have to face the outside rod holders</li><li>Optional: Put the digital hygrometer into the holder and clip it on one of the long edges. The holder is for hygrometers with a 41mm diameter on the inside (not the top). I bought the hygrometer on <a target="_blank" href="https://amzn.to/3IdfOuK" rel="nofollow noopener">Amazon</a></li><li>Optional: Use the other two connectors to keep the 2x2 frames together. Only required, if you put loose desiccant into the box and want to more easily remove the holder in one piece without removing the hygrometer first</li></ul>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/785813/2024-02-24_8170d0ddc7328.png"><figcaption>Assembled View</figcaption></figure>

Trådförvarare: Dry Box Spool Holder IKEA Samla 45L

Filament Storage

Falets

This is yet another splitter / adapter for the Carbon/P1/PS with an AMS. It allows you to keep the AMS connected while using single spools. The part is light enough that the PTFE tubes hold it in place. The path favors the AMS to prevent jams, so some manually-inserted filaments may need a little more force to get through the adapter. I've been able to get everything from TPU to CPE-CF through with no issues.&nbsp;It's meant to work with <a target="_blank" href="https://www.amazon.com/BIQU-Straight-Pneumatic-Connector-Extruder/dp/B01IB81IHG/ref=sr_1_1?crid=26EXKP13CX3M1&dib=eyJ2IjoiMSJ9.AYFYlvL16_sjqwE4hK8olPExF0o5qmT4snAo9YlzqDzN8ZjD95RAPH5HwlI_RJAHV7P1s3jE8PbD_awLGPZ4TOQdqkMJHyJRhVoPZMSJ8fyPcLNt1ogKjv6Vo0frtqcDu79TQGDSQ0sfsvlVyE9906ZJYRp6IJYhGVMWVMsy8ZpGdEw5J6PtMYm2eT9jXdrEbqjffOfmJQ8pDXbuQ6iKxJPOJ-yey37Xm6WQMcKWmFzO_tKMZDkCx7e5d94WzCwZxrsfq-YQvxdjCIJm6pcjNuQTcmKa88M0AB-cg-ZB2mc.rlVj43akSBmDdNo8pzjIUQ3yPkRt7deg-HDVno4OgwE&dib_tag=se&keywords=m-10%2Bptfe%2Btube%2Bfitting%2Bconnector&qid=1708711452&s=industrial&sprefix=m-10%2Bptfe%2Btube%2Bfitting%2Bconnector%2Cindustrial%2C106&sr=1-1&th=1" rel="nofollow noopener">PC4-M10 PTFE tube fitting adapters</a>. The threads are part of the print and no further drilling or tapping is required. Just screw in the fittings, insert the tubes, and enjoy never having to disconnect the AMS to print non-compatible materials again.&nbsp;The 3MF includes two versions of the part. One should be printed with supports (auto trees work well). The other includes a 0.8mm layer at the shoulder of the single-side fitting that eliminates the need for supports and is meant to be punched through after the print.&nbsp;The 3MF was sliced using BambuStudio's adaptive slicing. In order to ensure the threads work well, slice at .12mm or thinner layers. The adaptive layer adjustment will maintain the details at the threads but will save time overall.&nbsp;I've been using this with no AMS jams for a few months, but your mileage may vary. Note that some of the pictures show an earlier version of the part. The geometry is the same, it just has a different label for the spool port.

AMS Filament Splitter Adapter

Splitter Adapter

Morgen Kaffe

A simple wedge/door stopper made in TPU, I use for stopping the vibration between the table and the wall. It can also be used for stopping doorsPrinted in TPU 0.2mm Layer Height

Door stopper TPU Simple

darren.meier

I downloaded a really handsome AMS cable tidy guide recently that was real popular and kinda shaped like Texas. But once I printed it I found a few issues for my particular use case-- one, I needed it to support using an AMS riser. Two, I wanted it to have clearance for quick release buttons at the AMS junction box. And three, the feed lines didn&#39;t quite line up with the AMS junction box on the back of the printer. So I gave it a bit of thought and realised that I could support more use cases by using a couple control points instead of set curves as cable guides, and measured out the most precise feed lines that I could so the PTFE feed tube leads perfectly into the junction box. The upper guide for the AMS power/data cable is segmented so you can exit the run at multiple points if you&#39;re running an AMS riser taller or lower than my own. I included models with and without branding so you can look as basic or extra as you like; and there are versions that support 12mm x 1.5 magnets (nominally 12mm x 2mm but I find most of them are 1.5mm deep) and versions without, in case you want to use some double sided tape to further secure it. I hope some of you might find this design useful, thanks for looking and have a great day!&nbsp;ASSEMBLY NOTE-- you&#39;ll remove the AMS junction box to install this. Remove the two screws, disconnect the PTFE tubes (at the Bowden connector entering the printer, and at the junction box leading from the AMS). Slide the outflow PTFE tube through the channel exiting the junction box toward the printer, then reattach the junction box to the printer with the original screws and reconnect everything else. Slide the feed PTFE tube through its channel to the junction box. Voila!&nbsp;UPDATE! &nbsp;Hi guys! Had a few requests to try my hand at a similar idea for the AMS hub for users with more than one AMS unit. Took me a bit to figure it out after I received my hub from Bambu, but the model is uploaded now on Makerworld. Here it is if you need it, cheers! https://makerworld.com/en/models/399409#profileId-300929&nbsp;Shoutout to KobaRiley for inspiring this model. I modeled this from scratch and I feel it approaches the problem in a different manner so I&#39;m not labeling it a remix, but I wouldn&#39;t have had the idea for it without trying his cable tidy. So thank you, friend, for your model!

AMS cable manager for X/P series

Tidy

Hiro Koiso Racing

This model is designed to fit X1 and P1 series printers. HKR poop chute features interlocking leg to secure the chute to the printer body without extra hardware or magnets. ※Fitment Note: If you got X1, X1C and P1P in Feb 2023 and earlier (most likely built in 2022) , Your printer might have shorter legs than current version.  This can cause a printer to not sit level with the chute installed. How to tell if you have a early style short leg printer<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218121/design/2024-03-05_177ad051bd84f.jpg"><figcaption>Print The chute and see if the round part of base can slid under the printer as pictured. If it goes like picture above, you have current style. no further action is required. If the chute base doesn&#39;t goes in, follow instructions. Scroll down for further information</figcaption></figure>  <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218121/design/2024-03-02_0f1d75fb4cc6e.gif"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218121/design/2024-03-02_8219b55930c54.gif"><figcaption>Easy printing - It prints without support.</figcaption></figure>Removable bucket are easily access from front and available in 4 sizes.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218121/design/2024-03-02_52e2e363fc345.gif"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218121/design/2024-03-02_ec5da20ffb566.gif"></figure> <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218121/design/2024-03-02_7002ac682aaca.jpg"><boostme><boosttitle>Boost Me</boosttitle><boostcontent>If you enjoyed this model, please consider boosting it to support creator. 
Thank you!</boostcontent></boostme> 《Solutions for early short leg printers clearance issue 》 2 ways for fix - both methods raise the printer height to same as current version to correct clearance issue. So print whichever you prefer and install to an early style printer. (Files are available for download)<ol><li>Replacement TPU leg - Extended legs replace stock rubber feet. Print with TPU <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218121/design/2024-03-05_ab7611200d584.jpg"> <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218121/design/2024-03-05_5d39951f13735.gif">  </li><li>PLA spacers - PLA or whatever rigid filament material you used to print the chute would work. They fit inside the leg pockets, use with stock Rubber feet <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218121/design/2024-03-05_ac0d4c15d6753.jpg"> <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218121/design/2024-03-05_e325c22380ea.gif">  </li></ol>Tip for leg replacement:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218121/design/2024-03-05_828fd7817fbe4.jpg"><figcaption>Bring a leg to the edge one by one to replace. So you don&#39;t have to lay printer on side.</figcaption></figure>&nbsp;&nbsp;Checkout more HKR printer accessories: <a target="_blank" href="https://makerworld.com/en/u/2567436854" rel="nofollow noopener">https://makerworld.com/en/u/2567436854</a>&nbsp;・HKR Stackable Build Plate Storage: <a target="_blank" href="https://makerworld.com/en/models/120963#profileId-130105" rel="nofollow noopener">https://makerworld.com/en/models/120963#profileId-130105</a><a target="_blank" href="https://makerworld.com/en/models/120963#profileId-130105" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218121/design/2024-03-02_1f77d220d2196.jpg"></a>&nbsp;・Foldable AMS side mount spool holder - No Bearing: <a target="_blank" href="https://makerworld.com/en/models/145321#profileId-158083" rel="nofollow noopener">https://makerworld.com/en/models/145321#profileId-158083</a> <a target="_blank" href="https://makerworld.com/en/models/145321#profileId-158083" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218121/design/2024-03-02_119fd552797b3.jpg"></a>&nbsp;・Foldable AMS side mount spool holder - with Bearings: <a target="_blank" href="https://makerworld.com/en/models/153090#profileId-167255" rel="nofollow noopener">https://makerworld.com/en/models/153090#profileId-167255</a><a target="_blank" href="https://makerworld.com/en/models/153090#profileId-167255" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218121/design/2024-03-02_25f94a5385d15.jpg"></a>&nbsp;Happy printing!

HKR Interlocking Poop chute with removable bucket

P1S Bin

Alexanderwrobinson

I recently upgraded and bought my second printer (Bambu Lab X1C) and not only am I finding that I want to do prints on each printer with the same filament but some of my spools don't fit the AMS system.A lot of the existing respooler tools I found online were convoluted and required many parts and their own setup space. I wanted something that was quick, simple, and didn't take up space. This tool requires a 3/8" (9.5mm) Socket adaptor drill bit to simply plug into the end of the respooler, pull the trigger, and bam! Respooled. Just make sure that you set the drill to speed 1, and torque 6. Anything higher will risk the kickback destroying the print.DO NOT RECCOMEND using on anything greater than a 1kg spool with provided settings, really beef up the perimeters and infill of the whole thing if you do want to try!&nbsp;If you like what I'm doing and want to help me keep doing it feel free to <a href="https://www.buymeacoffee.com/AlexWRobinson" rel="nofollow">Buy me a Nozzle</a> :)&nbsp;Hardware Requirements:<ul><li><a href="https://www.amazon.com/DEWALT-DW2542IR-4-Inch-8-Inch-Adaptor/dp/B001309TT4/ref=sr_1_10?crid=3RB8SV3NINBAS&keywords=3%2F8+impact+socket+bit&qid=1669504698&sprefix=3%2F8+impact+socket+%2Caps%2C264&sr=8-10" rel="nofollow">3/8" (9.5mm) Socket Adaptor Drill Bit</a></li></ul>&nbsp;Print Instructions:<ul><li>Any Layer Height</li><li>15-20% Infill <ul><li>Some strength is needed</li></ul></li><li>Add modifier around drill bit hole to make 5 perimeters<ul><li>2 Perimeters will lead to the kickback breaking the print</li></ul></li></ul>The 3mf file provided includes the required modifier!Happy Respooling!

The Respool Tool (Respooler Drill Attachment)

Spool Winders

Bambu Lab

This is a spool holder for Bambu filaments.

Bambu Spool

Spool

ShortyTHEone

i'm using eSun's PLA+ since i bought my X1C with AMS, sadly the new Spools come on cardboard and i dont trust it fully and dont want my AMS full of cardboard dust. eSun is offering a solution for this, so i thought i gonna share it.&nbsp;Its two Rims that attach to the Sides of the Spool, each Rim weighs around 15g and the holes for the Filament are still free to use.&nbsp;//EDIT 10/26/2023: Several people reported that the spolls wont fit their AMS after installing the Ring on the spool. it seems that Bambu has changed some Specs on newer AMS units. if you run into the problem that your Spools wont fit your AMS unit and the lid cant be closed <a target="_blank" href="https://makerworld.com/en/u/243407759" rel="nofollow noopener">DesignCraft</a> hast uploaded a <a target="_blank" href="https://makerworld.com/en/models/33133#profileId-29934" rel="nofollow noopener">Lid Riser</a>, so you can fit every Spool and still close your Lid