Great print

Exceptional print, I highly recommend its use and the quality is definitely there.

Another excellent print that works perfect and looks great!

Like the improved grip as well.

Works perfect and looks better than the standard mag plate.

Great print!. May consider redesigning the pour spout so it pours on less of a tilt. When I used this, some of the pellets would fall out from having to tilt the tray at a high angle.

Excellent print but for some reason the parts of the red stripe print under the white and shows thru on my P1S.

Exceptional print and works great!

Exceptional print and works great!

Exceptional print and works great!

Avid bass fisherman and I love this print. I would recommend printing using a 0.2mm nozzle. I used my 0.4 and noticed tiny pin holes when I held the print up to light. Overall an excellent print!

Works great but needs to be glued together which should be noted in the description.

Excellent print for ammo storage. Very well designed! I like it so much I downloaded several other ammo storage boxes made by this creator. Highly recommend!

Prints exactly as described and a perfect match for the Bambu filament. Great print, I definitely recommend it!

Printed perfect and works great and mounted to the multiboard easily.

Works great.

Works perfect, I only used 2 for myP1S.

Excellent print and works great but the only issue is the hardware listed is not correct such as the spring. The springs are too small.

Excellent print, handles worked perfect even on my smaller 1.5 mm wrench however you should probably switch to .02 nozzle instead of 0.4 like I did so the writing on the side of the 1.5 will be legible.

Excellent Print! Previous version I printed would fall out. These lock in place better and stay.