Very much liked! I used keychain maple leaf design for a cute lunch bag tag. Beautiful!! thanks

Very good design, works very well. I’d love one with maybe 50% more angle though :) for my needs only, but I made it work, still great! The pics I have are with an extension piece I also needed to clear a brick border design on my entryway.

I love this handle design, very cool and modern looking. I badly needed handles for my ikea drawer set, found these, designed a back plate for stability and so box wouldn’t bend over time or if heavy being pulled by handle though it may not have been necessary, lol. either way, Extremely happy with this print. not much existed that can compare to its uniqueness. THANK YOU SO MUCH!

Works very well, perfect size. I actually added it to an Angeles design I printed before that just didn’t extend far enough out to clear a bordering of brick. I glued that onto this print as I still needed an angle due to my home entry design and came out great. I recommend! long print almost 2 hours on normal speed, but I had extended it from 40mm to 60mm but that even was with reducing infill to 8% which still came out very strong. Happy with design, thank you!

Great! Works very well. not sure why the sizes are SML, what does that mean exactly? a little info would’ve been helpful here, maybe I missed that somewhere. I went with large and it was what I expected based on pic of design. I did need to remove adjustable stand at bottom of camera to fit design, would’ve preferred to leave it on so as not to loose it in case of different needs in the future for the camera. Overall very happy about the print, though, thanks so much for beautiful. and functional design.

Absolutely the best! After years of using a pipe insulation tube piece to keep door slightly cracked for my cats, I realize it’s not in the intended position but the further up the door you slide it the larger the gap it creates which I required. I moved to a home that had an air conditioner pull draft on the door that was quite strong and I had to use 3 tube insulator pieces stacked to keep enoughing opening for one of my more robust chubby kitties to push through the door. But it looked awful and was difficult to keep from falling off the door. This design! oh wow, it’d sell if you marketed it I’m sure! I added a little cushion (too be replaced with a clear one for better look in the future) for where it bumps the door frame so it didn’t make noise when it closed after being pushed open by myself going through. I t has very good strength and a cute look and easy to put on and take off when I want the door closed. AWESOME! thanks so much :)

Very Nice design, can be a little hard to mount without extended screwdriver due to position of holes but really no way around this in keeping the cute cup design as is. I needed a little storage for kitty spoons near the cat food cans in my tall pantry and this did the trick. Thanks so much!

Very happy with this print! it was exactly what I was looking for, and easy to mount Ring camera gen 2 holder that I didn’t have to screw into a wall and could move easily if I wanted, planned to mount on a window. I did adjust the angle on Bambu slicer, simple cut and realign of the plate so camera had a more downward slant since camera adjustment only allowed for so much tilt. I did find the mounting odd.. camera sits nicely but I didn’t see a way to attach it to this print. I suppose if it never got bumped and sat at 90degress it would be okay, but otherwise it’s an easy tumble. I used a zip tie at the cord exit and wrapped a twist tie around base as well. served my needs. Msybe I missed something in how camera is supposed to stay seated in the platform? please let me know, as I’d like to know for future prints. Thanks so much for great design.

ABSOLUTELY LOVE! was seriously considering one of the bigger much more complicated models that require nuts and bolts and rolling sockets and have about a dozen pieces or more and use a large amount of filament, then I found this! EASY, minimal filament, no headache to figure out and buy extra parts for. All I have to do to refill my standard black/white pla/petg filaments on the bottom is lift off the top AMS and and set to the side, takes less than a minute to do and then refill bottom AMS put top AMS back in place. I had a microwave stand in use before that allowed me to lift the lid of the bottom AMS but it just made the whole setup so tall and I really didn’t like the look of it a lot, and to take it off to get to printer top was a true pain. This print design is neat and compact, looks good, takes up nearly no extra space, isn’t a hassle to figure out and put together or take off. THANK YOU SO VERY VERY MUCH FOR THIS SHARE AND TRULY GENIUS PRINT

Love the box! used this as a start for a Roku under tv box mount, so just needed to adjust the sizes and ad securement tape to the bottom. Made my project easy as this provided for nearly every bit.

Holds well on even the thinnest material, love the knobs that keep it secure, the folded up cuff never came loose, When I print again I think I’ll make it a bit wider as the slim line tends to shift left or right a bit on thin material not staying straight but other then that easy adjustment I might make, these are perfect and fit my needs well. Great Design :)

Wow! What a great and unusual idea for zip tie storage. So easy to use, holds so many, and very clean & organized looking. I printed at 130% of the original size and am so happy with it, now printing a 170% increased size for some thicker reusable zip ties I have. This model is perfect, everything fits exactly as it’s meant to.. the tension on the rubberband equalizes well to each section and holds securely as it’s secured at back so even a small amount of zip ties are held snuggly. One minimal adjustment I made for my needs.. I changed the mount to regular pegboard pins as that’s what I have instead of skadis. Worked like a charm. Thank you designer for submitting such a unique creation!

Works very well! Better than any I’ve bought or printed in the past, the lock on the hook is key! What a great design, so glad you shared it. Thank you!

would’ve been really nice to have some kind of response to my questions about supports sent to publisher of print, guess too much to ask. this is stellar idea & works so great, but took 3 tries to get one decently printed, the supports were a nightmare even when adjusting spacing from print. I tried printing this 3 ways.. the last was vertical w/supports between the spaces which was a PIA to remove at the ends but still the best result. I wanted smaller sushi pieces so made some adjustments.