Magnetic holder for 10 mini files, for example <a target="_blank" href="https://www.amazon.de/-/en/gp/product/B09PYT7WM2/" rel="nofollow noopener">these</a>. Pegs for Kupper pegboard.Holes for magnets are parametric, everything up to 9mm (diameter) x 8mm (depth) works. Holes have tiny taper and 0.1mm extra tolerance, so input measurements from manufacturer and adjust if needed.&nbsp;Parameters in f3d for:<ul><li>hole diameter</li><li>hole depth</li><li>adjustment for diameter and depth tolerance</li></ul>Stl has holes for 6mm x 2mm magnets.&nbsp;Print back side down, needs support all around the pegs. Print profiles have these settings and holes for 6 x 2mm magnets.&nbsp;More holders for Kupper pegboards: <a target="_blank" href="https://makerworld.com/@upps/collections/890902" rel="nofollow noopener">Kupper Collection</a>

Magnetic Mini File Holder for Kupper pegboard

Kupper

Holder for generic micrometer from Aliexpress/Amazon for Ikea Skådis pegboards. Made it for <a target="_blank" href="https://www.amazon.de/gp/product/B0821CD5S3" rel="nofollow noopener">this one</a>, should fit others as well. Diameter for the round part is 60mm, handle diameter is 18.5mm and length 45mm. Fit with pegboard is snug, will not shake around.&nbsp;Print profiles set up with: 0.20mm, 2 walls. Pegs down, needs supports around pegs.&nbsp;More Skadis holders: <a target="_blank" href="https://makerworld.com/@upps/collections/927610" rel="nofollow noopener">Skadis Collection</a>