UnderRated

Wiseone

The curious discards from the Bambu 3D printer, left unattended, will litter your desk or floor. Here is yet another "poop chute" to divert the filament effluent into an adjacent receptacle.&nbsp;My design consists of two parts, a chute and a bin or "poop tray". The chute catches the filament waste and diverts it into an easier to get to small bin. The design aims to be minimal in print material, yet functional.&nbsp;The chute secures to the back of the Bambu printer via a 3mm x 7mm self-tapping screw. The screw should be enough to retain the chute in position. Otherwise, double sided tape can assist. The bin comes in two sizes (50 and 100mm widths) and sits freely at the base of the chute and captures the waste.&nbsp;With regards to a replacement screw, here's a couple of suggestions from my followers:    1.  If you got your printer with the AMS, the screw that held it to the print bed is the perfect size to hold this in place.    2.  The screws included with your Bambu printer to make up the scraper fit nicely, too.&nbsp;My print is made in 1.75mm Bambu PLA Green filament, with 0.24mm layer height and 15% infill on a Bambu Lab X1 Carbon printer. Print supports are not required.&nbsp;I hope you can find this print useful, too.&nbsp;UPDATE 12/12/2023 Added a 100mm wide poop chute bin.

Poop Chute (Yet Another) - UPDATED

Bookmark

Gatto

One Piece - Monkey D. Luffy Chibi Figure&nbsp;From the popular manga and anime series, One Piece, comes this adorable chibi figure of the main character, Monkey D. Luffy! Our pirate who knows no fear is 7 cm tall but can be resized to your liking. No print supports are needed with these dimensions, but if you modify them, they may be necessary!  <a target="_blank" href="https://makerworld.com/en/@Gatto" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000428600/design/2024-04-15_4fefedc8921d9.gif"></a><figure class="image"><a href="https://makerworld.com/en/@Gatto" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000428600/design/2024-06-23_dbf03a232872e.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/@Gatto" rel="nofollow noopener">Check out my profile for other models and follow MEOW!</a>&nbsp;

Luffy Chibi Figure - ルフィ

Figure

GlennovitS 3D

If you have a multicolor-printer generating lots of poop/purge/waste - then use some of it with this game! It’s is made to have fun with your Bambulab poops - enjoy!The rules are simple: don’t drop the poop - but the game is hard to master.. Try it!<h2>Overview</h2><figure class="image image_resized image-style-side" style="width:33.66%;"><img src="https://makerworld.bblmw.com/makerworld/draft/848836/2024-04-09_3dc21f8bb099d8.jpeg"></figure>The game is all 3D-printed and consists of the following pieces:<ul><li>Tower<ul><li>Tower base</li><li>Tower extension 1</li><li>Tower extension 2</li><li>Tower extension 3</li><li>Tower top</li></ul></li><li>Beams (lots of them!..)</li></ul><figure class="image image_resized image-style-side" style="width:33.6%;"><img src="https://makerworld.bblmw.com/makerworld/draft/848836/2024-04-09_09804551f88ea.jpeg"></figure><h2>Assembly</h2>The Tower should be easily assembled - snaps together - and when not in use, it can be taken apart to save some space.<h2>Rules (Original)</h2><figure class="image image_resized image-style-side" style="width:33.06%;"><img src="https://makerworld.bblmw.com/makerworld/draft/848836/2024-04-09_043e0ee995cc88.jpeg"></figure>Setup for a round:<ol><li>When the Tower is assembled, insert 4 beams in one of the top rows of the tower</li><li>Then you each take turn placing 1 Beam in the Tower until they are all placed (how many you want, is up to you - maybe start with a total of 20-30)</li><li>Fill purge/poop into the top of the tower - and then you are ready!</li></ol>The game:<figure class="image image_resized image-style-side" style="width:33.21%;"><img src="https://makerworld.bblmw.com/makerworld/draft/848836/2024-04-09_d2cfc322d62b18.jpeg"></figure><ol><li>In turn, carefully pull 1 Beam out of the Tower (must be in a section/extension that contains poop!).</li><li>When a single purge/poop drops out at the bottom of the Tower in your turn - you loose the game/round!</li></ol><h2>Rules (Balanced)</h2>Setup for a round: <ol><li>Do like Original rules above.</li></ol>The game:<ol><li>In turn, carefully pull 1 Beam out of the Tower.</li><li>If purge/poop drops out of the Tower in your turn, collect it. </li><li>When all purge/poop is collected by players, the winner is the one with the most/least purge/poop (you choose!)</li></ol><figure class="image image_resized image-style-side" style="width:33.21%;"><img src="https://makerworld.bblmw.com/makerworld/draft/848836/2024-04-09_2ef8208d7f216.jpeg"></figure>Note: this is an all new game - if you have suggestions on improving the rules or the model, please leave a comment or contact me directly!Warning: as in Jenga, every fast move or careless shaking with the table can ruin your chances of winning - so be careful!<h2>Print instructions</h2>All parts should be fairly easy to print. But here is a few tips:<ul><li>Brim: Maybe. It can help with bed adhession on the tower parts. Not needed on the Beams!</li><li>Supports: NO supports needed</li><li>Multicolor: The tower extensions can be imported into the slicer and Split into parts, to easily color the different segments.</li></ul><h2>Want to show your support?</h2>You can see ALL my designs on Printables - and you can become an active supporter. I would really appreciate it!<a target="_blank" href="https://www.printables.com/@GlennovitS3D#join" rel="nofollow noopener">https://www.printables.com/@GlennovitS3D#join</a>&nbsp;Happy printing!

Poop Tower Game (purge escape - jenga style)

Coaster

capek.jaroslav

Wall Art decoration with a fishing motif

Bookmark

Figure

Coaster

2D Art