type1assassin

alvitdk

This hydroponic system is based on Dani&#39;s Indoor Grow Tower but adapted to a large 13-gallon tank readily available on Amazon or big box stores in the US (<a target="_blank" href="https://www.amazon.com/dp/B0BFJQ4W61?ref=ppx_yo2ov_dt_b_product_details&amp;th=1" rel="nofollow noopener">Mighty Tuff 13 Gallon</a>). I also added a trellis system to the unit to allow plants to grow and climb on when getting heavier.The lid is printed in 4 pieces due to size and screws onto the storage container just like the original lid that comes with it. The rubber seal can be removed from the original lid and installed onto the printed lid.I also added a light holder to the unit if used inside to mount a <a target="_blank" href="https://www.amazon.com/dp/B09S5DTP6V?ref=ppx_yo2ov_dt_b_product_details&amp;th=1" rel="nofollow noopener">hydra-style LED grow light</a>.I am using a <a target="_blank" href="https://www.amazon.com/dp/B002JPGID2?ref=ppx_yo2ov_dt_b_product_details&amp;th=1" rel="nofollow noopener">submersible pump</a> that is strong enough to add several more towers to the unit.I also designed blind caps for unused pods to keep light out and prevent algae growth.

Hydroponic Grow Tower

hydroponics

Brent Peterson

<h2>Toroidal Launcher</h2>This is an original design created for the <a target="_blank" href="https://makerworld.com/en/contests/5" rel="nofollow noopener">Flying Objects design contest</a> and features a handheld three-stage planetary gearbox that launches a toroidal ring over 3000 RPM! The design is 100% 3D printed; all pieces press fit together and no additional hardware is required.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000093385/design/2023-12-15_92eaaa9691a14.gif"></figure><boostme><boosttitle>Boost Me</boosttitle><boostcontent>If you&#39;re interested in seeing more designs like this please consider boosting to support development of future projects. Thank you!</boostcontent></boostme><h2>Modifications and Add-on Designs</h2><ul><li>Gearbox modifications<ul><li><a target="_blank" href="https://makerworld.com/en/models/99992#profileId-106623" rel="nofollow noopener">High torque conversion kit (1:2 ratio)</a></li><li><a target="_blank" href="https://makerworld.com/en/models/105586" rel="nofollow noopener">1:3 ratio gearset</a></li><li><a target="_blank" href="https://makerworld.com/en/models/108803" rel="nofollow noopener">1:4 ratio gearset</a></li><li><a target="_blank" href="https://makerworld.com/en/models/105590" rel="nofollow noopener">1:5.5 ratio gearset</a></li><li><a target="_blank" href="https://makerworld.com/en/models/110188" rel="nofollow noopener">1:7 ratio gearset</a></li></ul></li><li>Toroidal ring designs<ul><li><a target="_blank" href="https://makerworld.com/en/models/102279" rel="nofollow noopener">Toroidal Launcher Mini Rings - 100mm pitch</a></li><li><a target="_blank" href="https://makerworld.com/en/models/97633" rel="nofollow noopener">Toroidal Launcher Mini Rings - 150mm pitch</a></li><li><a target="_blank" href="https://makerworld.com/en/models/102728" rel="nofollow noopener">Toroidal Launcher Mini Rings - 200mm pitch</a></li></ul></li><li>Remix Templates<ul><li><a target="_blank" href="https://makerworld.com/en/models/123219" rel="nofollow noopener">Threaded cap</a></li><li><a target="_blank" href="https://makerworld.com/en/models/125073" rel="nofollow noopener">Hexagon gear driver</a></li></ul></li></ul><h2>Specifications</h2><ul><li>Three stage planetary gearbox with 1:48 gear ratio (overdrive)<ul><li>0.75mm gear module for ultra-smooth performance (24/72 teeth)</li><li>10mm hex driver for connecting gear stages</li></ul></li><li>Toroidal ring design with four blades (1.2mm thick) available in three sizes<ul><li>100mm diameter, 150mm pitch</li><li>125mm diameter, 175mm pitch</li><li>150mm diameter, 200mm pitch</li></ul></li></ul><h2>Printing Tips</h2><ul><li>All prints pictured were printed using Bambu Basic and Matte PLA</li><li>For best results run flow rate calibration and thoroughly clean build plate</li><li>The launcher gears are available in two print profiles with the following changes to the standard 0.20mm profile:<ul><li>Arachne wall generator</li><li>5x top and bottom walls, 25% infill</li><li>75 m/s inner and outer wall print speed</li></ul></li><li>The toroidal rings are available as a single print profile with the following changes to the standard 0.20mm profile:<ul><li>0.6mm line thickness, Arachne wall generator</li><li>75 m/s inner and outer wall print speed</li></ul></li><li>The launcher housing prints with the standard 0.20mm profile.</li></ul><h2>Printed Parts</h2><ul><li>Launcher Gears<ul><li>SunGear24.step [3x]</li><li>PlanetGear24.step [9x]</li><li>PlanetCarrier24.step [3x]</li><li>RingGearDouble.step [1x]</li><li>RingGearLid.step [1x]</li><li>RingDriver.step [1x]</li><li>GearDriver.step [1x]</li></ul></li><li>Launcher Housing<ul><li>HousingBase.step [1x]</li><li>HousingRingLid.step [1x]</li><li>HousingCarrierHolder.step [1x]</li><li>HousingCarrierThreads.step [1x]</li></ul></li><li>Toroidal Rings<ul><li>ToroidalRing100.step [1x]</li><li>ToroidalRing125.step [1x]</li><li>ToroidalRing150.step [1x]</li><li>ToroidalRingDriver.step [1x]</li><li>ToroidalRingLauncher.step [1x]</li></ul></li></ul><h2>Launcher Assembly</h2><ul><li>Assembly the planet carrier with three planet gears and one sun gear as shown below. Repeat for all three planet carrier assemblies.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000093385/design/2023-12-31_efae722ebe2db.gif"></figure><ul><li>Use the shorter hex drive to connect two sets of gears. Align both planet carriers and hold them with one hand while holding the double ring gear in the other hand and slowly turning as you close the gear; once closed insert the assembly into the main housing to hold secure. The gears should spin freely; if they don&#39;t remove the gear assembly and repeat this step.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000093385/design/2023-12-31_f1371c6d57ee6.gif"></figure><ul><li>Use the longer hex drive to connect the last set of gears and then assemble with the threaded cap as shown below.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000093385/design/2023-12-31_4926c45fbbf51.gif"></figure><ul><li>Carefully mesh the single ring gear with the planet gears taking note of the 2mm flat section that is positioned towards the main gear assembly as shown below. Use the same method of rotating while slowly closing and covering with the cap to hold secure.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000093385/design/2023-12-31_54c6fffceb4e5.gif"></figure><ul><li>Done! The assembly should spin smoothly with the output shaft making 48 rotations for every one turn of the input knob. Performance depends on printer tolerances and filament used; for best results use the include print profiles with Bambu Studio (supports many different printers). A bit of lubricant can also be added to the gears to improve performance.</li></ul><h2>Toroidal Ring Assembly</h2><ul><li>Insert the hex drive into the interlocking driver; the clearance is tight but it should be a snug fit.</li><li>Insert the assembled driver into the output sun gear, the fit should be the same.</li><li>If the driver does not stay secured when launching the ring a small amount of CA glue can be use.</li></ul><h2>Changes</h2><ul><li>v1<ul><li>Initial release; files now available in v1old folder</li></ul></li><li>v1.1<ul><li>Updated print profiles with improved settings for gears and rings</li><li>Improved single color print profile, fits on A1 mini and objects are laid out to allow skipping</li><li>Improved clearance of gears and overall meshing</li><li>Updated toroidal ring to use the same launcher as the mini rings<ul><li>Print profile includes 3 sizes (100mm, 125mm, 150mm)</li></ul></li><li>Updated assembly instructions to have fewer steps with a GIF for each one</li></ul></li><li>v1.1.01<ul><li>Added new section for template designs intended for remixing</li></ul></li></ul>

Toroidal Launcher - High RPM Planetary Gearbox

fun toys

Victor

Design reference rules, it is specially useful while modeling and taking measurements of real world objects. They are designed to fit inside Digital Calipers Case. You might also like this model:<a target="_blank" href="https://makerworld.com/en/models/135018" rel="nofollow noopener">https://makerworld.com/en/models/135018</a>&nbsp;Thank you for printing my model!If you'd like you can buy me a coffee here: <a target="_blank" href="https://www.buymeacoffee.com/vitim" rel="nofollow noopener">https://www.buymeacoffee.com/vitim</a>

Fillet Radius Finder (Inner/Outer) - Design Reference Ruler 1 to 12mm

tools

ManuFaktur

Adapter for All Carboardspools with up to 198 mm Outer Diameter.&nbsp;Works with nearly every spool.&nbsp;55mm Adapter should fit Polymacker Spools perfect.Just send me a massage for other Diameters or Designs.&nbsp;Version 1:Easy to print realy fast and little use of material Version 2: Easy to print, Realy Stable if something get stucked it will not deform. Realy cool lookVersion 3:Easy to Print, Super fast, uses just 25,46 g of Material and the inner diameter is adjustable via slicer (Just splitt into PARTS !not Objekts! and scale the inner parts as you like in x and y) but weekest versionVersion 4: Core (Adjustable), the fastest, stronge and uses less Material (My Favoritversion)Added Clamp with some space for Silica as wight and extra Silica-Gel&nbsp;Profils works with PLA or ABS perfect

Cardboard Spool Adapter (Universal) for Bambu Lab AMS 

Printer & AMS upgrades

lastwaun

Standard deck of cards (52 cards) plus two jokers. This also includes a case for the cards that needs to be folded into the box shape. The cards are plenty flexible and can eaily be shuffled and they bridge well! I found the textured PEI sheet to give a nice feel in the hands and keeps cards from sticking to eachother. I found PLA to work just fine for the cards - plenty flexible and per ususal easy to work with. The cards also shuffle extremely well and even bridge! I first tried the box as PLA but it quickly broke after too many bends of the lid so I made it out of PETG next time and so far it's held up just fine.&nbsp;The 0.2mm nozzle allowed for fine detail and thin layers. In my testing I found that having 2 layers of the color was just right - not going to peak through but also enoough to be plenty visible so I used 0.06mm layer height.I also found that slowing down the first layer and starting with black ensured good first layers.&nbsp;<a target="_blank" href="https://imgur.com/gallery/A5i34lz" rel="nofollow noopener">Here is a video</a> of the cards being shuffled.&nbsp;&nbsp;

Waterproof Playing Cards

board game components

sipura

Hello,UPDATE 26/1/2024:You can check you our new model, same like this one but XL bigger. Inner containers are compatible.<a target="_blank" href="https://makerworld.com/en/models/157759#profileId-173134" rel="nofollow noopener">https://makerworld.com/en/models/157759#profileId-173134</a> &nbsp;&nbsp;UPDATE 19/1/2024:You can check you our new model, same like this one but smaller. Inner containers are compatible.<a target="_blank" href="https://makerworld.com/en/models/146935#profileId-160286" rel="nofollow noopener">https://makerworld.com/en/models/146935#profileId-160286</a> &nbsp;My new model of the utility case.&nbsp;Simple print without supportAll parts are completely printed with PLA, only the gasket needs to be printed with TPU in order to close smooth and seal nicely.&nbsp;To assemble it, you need:6pcs M3 nuts2 pcs of screws M3x303pcs of screws M3x18&nbsp;Dimensions are in mm:&nbsp;<figure class="image image_resized" style="width:65.37%;"><img src="https://makerworld.bblmw.com/makerworld/draft/802624/2024-02-10_e25480cf53e6d.png"></figure><figure class="image image_resized" style="width:65.19%;"><img src="https://makerworld.bblmw.com/makerworld/draft/802624/2024-02-10_97292542d7a98.png"></figure>NEW:&nbsp;Now we made V2 model that has thicker hinges on each side by 1mm behind, and wall loops with 3pcs. For this model, instead of 3pcs M3x18mm screws, you now need 3pcs M3x20mm.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/802624/2024-01-13_6bc78c7c28bab.jpeg"></figure>&nbsp;Also, if you need some custom accessories for all our models, you can contact us on our patreon page which is in bio.&nbsp;Enjoy printing and using this useful case.

Utility OG case

Storage

Jopek Design

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/570986/2024-01-09_stcppr0a0obd.png"></figure><h4>Dimensions (LxWxH)</h4>162,5 x 59,4 x 47 mm (100% scale)<h4>Basic information</h4>The model is divided into 6 movable articulated segments, which grant the model with lifelike movement, and a high range of flexibility.&nbsp;The model is using a second generation of linkage system, which was designed to be downscaling, and bigger layer heights friendly. The holes in the linkage system have been changed from a circular shape into an oval, which introduces more play on the top and bottom parts of the link, meaning, that the filament can droop much more, without causing any problems with mobility of the links. This means, that you can downscale the model much more, than it's predecessors! And as a cherry on the top, the new links are tougher than ever before! This will be handy to anyone, who is using a brittle filament, or going crazy with scaling experiments.<h4>Files information</h4>You can choose from total of 2 files: .3mf (recommended); .stl (for slicer compatibility issues);&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/570986/2024-01-09_m0poqg90fdsa.png"></figure><h4>Material</h4> PLA<h4>Layer height</h4> ≤0,2 mmor>0,2 mm + variable layer height<h4>Infill</h4>>10%<h4>Support</h4>None. The model was designed not to require any support material.<h4>Scaling</h4>Possible, however, If your machine isn't calibrated properly, has accuracy problems, or if you're dealing with filament issues, downscaling isn't recommended. When downscaling, proceed cautiously, and don't go too small, unless you want to risk mobility related issues. When printing a downscaled version, adjust layer height in proportion to the scale.But be careful, if you're printing a downscaled version, the dorsal fin is quite small, and it's sticking out quite a lot, so it might not have enough time to cool down while printing. To eliminate this issue, print at least two instances of the model, or add a simple tower with the same height as the model. This will force the nozzle to move away from the fin, and allow it to cool down properly.<h4>Orientation</h4>Default, laid flat on the belly<h4>Adhesion aid</h4>Not necessary, contact area with the buildplate should be sufficient. If your print surface suffers from poor adhesion, consider using some adhesive spray, or other kind of adhesion booster. Using brim is possible, but not recommended, as it would be difficult, and inconvenient to remove afterwards.<h4>Other settings/ideas</h4>To make the model look even cooler, add a filament change into your gcode, and print the belly in a different color.&nbsp;In this section, you can find a list of all updates and fixes, which were introduced to the model along the way. Each update will be explained thoroughly, so that you know, which issue was every specific update adressing. If you're having any problems with the model, you can check here, if a new, revised version of the model, has already been released, in a response to your problem, or not. If you run into any issues with the model, please pay a visit to a section of known issues, which can be found just below the Updates and fixes. If you won't find your specific problem in there, don't hesitate to contact me via dm.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/570986/2024-01-09_5pbvl2sjdjuf.png"></figure><h4>Update 1 (7/1/23)</h4>Added .stl version of the model to solve compatibility issues with some slicers, which don't (yet) offer .3mf files support. Both, .3mf and .stl versions are identical, but the .3mf version is more storage efficient, and carries additional useful data for your slicer, so if your software of choice supports both file formats, go for the .3mf version. To make the files easily distinquishable, and to help to avoid confusion, the .stl version is placed in a separate folder named “stl version”. This update was released just to deal with .3mf file slicer compatibility issues, and it doesn't introduce any changes to the model itself.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/570986/2024-01-09_1qzax9yrba3c.png"></figure>There currently aren't any known issues/work in progress. If you run into any, please contact me via dm.My work is free for personal, non commercial use. If you want to sell, or monetize my models in other way, please contact me via dm, and we will discuss details, terms and conditions, and your individual pricing plan.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/570986/2024-01-09_jw6qhtz2jijj.png"></figure>My work is free for personal, non commercial use. If you want to sell, or monetize my models in other way, please contact me via dm, and we will discuss details, terms and conditions, and your individual pricing plan.

Articulated Dolphin

articulated cuties

MKCAMC

***UPDATE***I made a Version 2 of this design. It is larger and can fit 6 eggs in each section rather than the 5 that this original version fits. It is also split into 2 sections that are glued together after printing. It can now be printed on small format printers. The longest piece is 148MM, so it can even be printed on the A1 Mini!!! Though it is larger, it still only uses 137g of filament. Here is a link to the new version.&nbsp;<a target="_blank" href="https://makerworld.com/en/models/53731#profileId-55507" rel="nofollow noopener">Longer Stackable Egg Dispenser by MKCAMC - MakerWorld</a>&nbsp;I noticed that many of the egg dispensers out there tend to take up more space than they save. They also tend to use up a lot of filament to print too. I made this simple solution to save space and to keep filament usage to a minimum. Each of these stackable trays only takes 117g of filament to print. They can be stacked as high as you'd like too. There is a grove around the entire outer edge of the tray that accepts the ridge that can be seen along the top of the dispenser walls. When stacked, each section is very secure and does not require glue. This allows for easy loading of fresh eggs. These dispensers also fit snugly next to each other to minimize the space they take up. Enjoy!

Stackable Low-Profile Egg Dispenser

household

WE3D Models

The FU Ghost Keychain is the perfect gift for any Spooky Season enthusiast! 🎃👻&nbsp;NOT FOR COMMERCIAL USE&nbsp;For Commercial Use License, visit:<a target="_blank" href="https://www.patreon.com/WE_3D" rel="nofollow noopener">https://www.patreon.com/WE_3D</a>

FU Ghost Keychain - Halloween 2023

halloween

jdlg2065

Print at 100% infill with a layer height of 0.2mm with a base layer of 0.2mm. Also, use a brim to prevent lifting in corners.Filaments Used(Try to use similar colors to match my print): Black - Hatchbox PLA Dark silk blue - Generic PLA Light blue - HatchboxPLA Orange - Hatchbox PLA Yellow - HatchboxPLA White - Hatchbox PLA Filament Swap Instructions: Black until layer #9 at 1.8mm Dark blue until layer #12 at 2.4mm Light blue until layer #13 at 2.6mm Orange until layer #14 at 2.8mm Yellow until layer #16 at 3.2mm White for the rest. Note: If resizing STL, leave STL's z-height the same.