tyhjay

机器人

MarkelL

Eiffel Tower model with easy to remove supports

Eiffel Tower

建筑

vidision

Voronoi pattern trim frame to fit the top of the Mac Mini or Mac Studio. Style and protection!

Mac Mini / Mac Studio Trim - Voronoi

筋斗云の点线面

平时经常会有一些细碎的垃圾需要放置，如果直接放置在车辆的杯架内显得很凌乱，所以专门设计一款翻盖式的车载杯架垃圾桶，翻盖的方式在倾倒时更加方便，同时开口也更大。1.翻盖需要从地面的支撑；2.打印材料推荐ABS（车内温度有时候可以达到70°），也可以用PETG；3.壁厚：≥4周；最后祝打印快乐！！&nbsp;

车用杯架垃圾桶-筋斗云

CherrysCollection

Wet shower shoes? Hang them in this simple model and let them drain the water.&nbsp;Easy to install using 3M Double tape. Clean the surface before application for a stronger bond.&nbsp;Can also be used to hang a towel/kitchen pot lids etc. (See pictures)&nbsp;There is an attachable hook that can be used to hang bath sponge or other similar items.&nbsp;Open for Feedback/Suggestions.&nbsp;Happy Printing!

Bathroom Shoe Drying Rack

家用

ThreeD-Michael

<figure class="table" style="width:78%;"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td style="width:50%;" colspan="2">If you like this design, please also check out my new <a target="_blank" href="https://makerworld.com/en/models/231936" rel="nofollow noopener">Optimized Bed Scraper</a>:</td></tr><tr><td style="text-align:center;width:50%;"><figure class="image"><a href="https://makerworld.com/en/models/231936" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/654792/2024-03-07_4670d91a31e1a.png"></a></figure></td><td style="text-align:center;width:50%;"><figure class="image"><a href="https://makerworld.com/en/models/231936" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/654792/2024-03-07_30f7514113eb6.jpg"></a></figure></td></tr></tbody></table></figure><figure class="table" style="width:78%;"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td style="width:50%;" colspan="2">Update: Upon request, I uploaded the poop buckets I use: <a target="_blank" href="https://makerworld.com/en/models/156253" rel="nofollow noopener">BambuLab A1</a>, <a target="_blank" href="https://makerworld.com/en/models/156091" rel="nofollow noopener">BambuLab A1 Mini</a>.</td></tr><tr><td style="text-align:center;width:50%;"><figure class="image"><a href="https://makerworld.com/en/models/156253" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/654792/2024-01-25_e31ca8915fbc3.jpg"></a></figure></td><td style="text-align:center;width:50%;"><figure class="image"><a href="https://makerworld.com/en/models/156091" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/654792/2024-01-25_ba2d0a197944.jpg"></a></figure></td></tr></tbody></table></figure>Poop Deflector for Bambulab A1 and A1 MiniI know there are already poop deflector designs online. I tried a few but didn't like them because they were either too brittle and/or lacked a proper attachment. That's why I created my own design, which offers the following advantages:<ul><li>secure fixation,</li><li>stabilized deflector,</li><li>stable walls,</li><li>easy and quick printing,</li><li>only 4g weight.</li></ul>Since I've been using this deflector, no poop has missed the basket...&nbsp;Assembly:Carefully click the poop deflector onto the purge wiper. Place a collecting container under the deflector and make sure that the deflector cannot touch the container in the lowest z position of the printer.

Poop Deflector (A1 + A1 Mini)

橙豆造物

颜色是红色、黑色、白色还有金属铜。金属铜和甲板颜色一起能充当甲板。

Tianic1:800 泰坦尼克号1:800彩色打印

熊熊

解决iPhone15pro的无线充电时手机过热的小工具功能1：新的iPhone15充电时散热不佳，在充电过程中会手机发烫，虽然苹果公司已经升级的手机固件，但是发热问题依然存在，所以几个小配件+3d打印可以很好的解决这个问题。功能2：有时候手机放在无线充电器上不是想要充电，只是把充电器当支架使用，通过这个工具的开关，可以控制风扇与充电器同时开关。配件列表 4010风扇2pin x 1 按钮开关两脚 x 1 TYPEC母头带线 x1特别说明：这个工具由于风扇是5v的风扇，所以不支持快充，如果需要快充要根据不同电压选择不同风扇并且更换快充的TYPEC母头———————————————————————————————————————————————— A gadget to solve the problem of phone overheating when charging iPhone 15pro wirelesslyFunction 1: The new iPhone 15 does not dissipate heat well when charging, and the phone will get hot during the charging process. Although Apple has upgraded the phone firmware, the heating problem still exists, so a few small accessories + 3D printing can solve this problem well. question.Function 2: Sometimes the mobile phone is placed on the wireless charger not to charge, but to use the charger as a stand. Through the switch of this tool, the fan and charger can be controlled to be switched on and off at the same time.Accessories list 4010 fan 2pin x 1 Button switch legs x 1 TYPEC female head with cable x1Special note: This tool does not support fast charging because the fan is a 5V fan. If you need fast charging, you must choose different fans according to different voltages and replace the TYPEC female connector for fast charging.————————————————————————————————————————————————开关链接： https://detail.tmall.com/item.htm?_u=q2h6giif384&id=6232642574864010风扇5v 2pin https://item.taobao.com/item.htm?id=640258020964TYPEC母头 https://item.taobao.com/item.htm?id=696152213598&_u=q2h6giib7a0

iPhone 15pro 无线充电降温器Mobile cooling fan

相机

wikiwada

A Voronoi cat model is an elegant and modern representation of a feline figure, created using a unique geometric partitioning. The sculpture is a three-dimensional structure that is characterized by the Voronoi diagram pattern, where the surface is divided into distinct, irregularly-shaped cells that are tessellated to form a cohesive whole.

Voronoi Cat

动物

Protoprints

An interpretation of Starry Night by Van Gogh made for filament painting.I tried hueforging an image of the original oil on canvas as well, but the outcome didnt look as good due to the nature of the brushstrokes.&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: Generic Black, Blue, Light Blue, Orange, Yellow, White PLA+ filaments.&nbsp;Swap Instructions: Start with Black At layer #3 (0.32mm) swap to Blue At layer #8 (0.72mm) swap to Light Blue At layer #13 (1.12mm) swap to Orange At layer #19 (1.6mm) swap to Yellow At layer #31 (2.56mm) swap to White for the rest. Two print profiles have been provided as 6 colors are used:<ol><li>for use with 2 or more AMS units</li><li>for use with a single AMS unit</li></ol>&nbsp;The only difference is that the single AMS profile has been set to swap back to slots 1 and slot 2 after printing from slot 4. A pause has been added before the end of the 4th color (orange) to allow for slots 1 and 2 to be changed from Black and Blue to Yellow and White respectively.In summary the print order will be Slot 1 → Slot 2 → Slot 3 → Slot 4 → Slot 1 → Slot 2.&nbsp;UPDATE: An updated experimental print profile has been uploaded with less orange and yellow. Try only if your orange/yellow filaments have a high opacity, causing the picture to look too warm.&nbsp;Protip: Reducing nozzle temps slightly (5 - 10 degrees C) may help prevent stringing on detailed prints like this that require lots of retractions.&nbsp;Happy printing! Share your makes!&nbsp;Note: Bambu Studio shows Error 920 : Non-manifold edges when slicing. This is normal for Hueforge prints. Please ignore and print away :)

Interpretation of Starry Night by Van Gogh - Hueforge - Filament Painting

3D Print Masters Hub

Golf Putting Cup Golf Hole-Easy print-Great fun with the family. Practice your putting!-Please like and subscribe! More to come!<ul><li>🔥🔥 Great surprise for members! See this link for EXCLUSIVE 3D print models: <a target="_blank" href="https://cults3d.com/en/users/FabulousFilaments/3d-models" rel="nofollow noopener">https://cults3d.com/en/users/FabulousFilaments/3d-models</a> 🔥🔥</li></ul>

Golf Putting Cup Golf Hole

game

skywolf

龙年特辑：新年剪纸合集

过年

Vissidus

Disclaimer: the <a target="_blank" href="https://makerworld.com/en/u/4065967614" rel="nofollow noopener">Author</a> assumes no responsibility or liability for any misuse and damage caused by the contents of this publication. The model and individual parts contained in this publication are not intended to be used to perpetrate any illegal activity. Under no circumstances shall the <a target="_blank" href="https://makerworld.com/en/u/4065967614" rel="nofollow noopener">Author</a> of this model and publication be liable for any alterations made to the contents of this publication by any party aimed to construct a firearm. The tool shown in this video is a 3D printed, non-functional toy pistol with no ability to propel any projectiles in it's initial configuration by default, by design. About: The PP9 is a toy handgun mockup, consisting a total of 30 parts (assembly required, not including springs). Everything you expect from a pistol is completely functional: chambering, ejection, trigger pull, slide stop on ammo runout, etc.. There is no striker and trigger lever intended in this design, thus the trigger pull is for show only. Note: PP9 stands for Printed Pistol 9 millimetre The magazine holds up to 13-15 rounds (9mm nominal) with an appropriate steel spring (or up to 4 rounds with the included printed spring). Slide racking, extractor, magazine lever and trigger pull require appropriate springs (not included in the assembly). Note: printed dimensions may differ, therefore some sanding may be required to achieve proper tolerance. Note: some parts required for full functionality (recoil spring, magazine spring, magazine catch spring, extractor spring) are not included in the assembly. Also, If you found this model to your liking and wish to support the author you can donate <a target="_blank" href="https://paypal.me/vissidus" rel="nofollow noopener">here</a> Accessories: This model features a short-barreled rifle (SBR) conversion kit, with a few of it's own accesories, such as a semi-adjustable stock, a vertical grip, non-flip iron sights and is capable of carrying any other accessory that can be attached to a standard picatinny rail. Note: the kit is currently undergoing testing (and as is, a semi-final prototype) To download the kit follow the link: <a target="_blank" href="https://makerworld.com/en/models/81074#profileId-86227" rel="nofollow noopener">SP PP9 - SBR Conversion Kit</a> – Recommendations: For the most appealing receiver appearance a carbon fibre/matte filament is recommended: PLA-CF/PETG-CF. Pins and levers are best made of carbon steel. For the slide/magazine a matte/metal finish filament is recommended (ex.: Bambu Lab PLA Metal, Bambu Lap Charcoal Matte PLA). Note: PLA is sufficient enough to withstand wear and tear. For extreme durability, printing critical parts (i.e. slide locking block, slide stop lever, etc.) with PC is highly recommended. Machined stainless steel (304L, 316L)/carbon steel (1040, 1045) alternatives are superb. -- Receiver Assembly Steps: <img src="https://makerworld.bblmw.com/makerworld/draft/228112/2023-11-23_5a2c5818fe086.png"> 1. Insert the ‘Slide Stop Lever’ (2) into the slot, aligned with a thru hole on the 'Control Unit Housing' (3), and push the ‘Slide Stop Lever Pin’ (1) until flush with the housing, locking the lever in place. 2. Insert the ‘Trigger Pin’ (6) into the 'Trigger' (13) until the pin protrudes (approximately) symmetrically from the trigger on both sides 3. Attach the trigger spring (not depicted in the drawing) to the trigger, and insert it into the housing unit until the trigger pin is confronted with two legs on each side 4. Align the housing unit with the receiver and push it into the receiver, aligning the rear, the front and the trigger with their respective cutouts. 5. Insert the 'Rear Mounting Rails' (5) into the housing unit as shown until fully seated 6. Insert the ‘Ejector’ (4) into the housing unit on top of the rear mounting reals, as shown, until fully seated 7. Lock the rear side of the housing unit in place by inserting the ‘Rear Mounting Pin’ through the receiver 8. Insert the ‘Magazine Catch Lever’ into the receiver, aligning the spring cutout on the lever with the hole inside the magazine well 9. Insert a magazine catch spring (1.6-1.8mm Music Wire, 20mm Length/Glock magazine catch spring, cut to 20mm length) into the hole and push it into the sot on the magazine catch lever 10. Insert the ‘Front Mounting Rails’ (12) into the cutout at the front of the receiver, locking it in place by inserting two ‘Front Mounting Pin’s from each side of the receiver, until flush with the frame 11. Insert the ‘Slide Locking Block’ (14) into the control unit housing slightly behind the front mountil rails, until flush with the top surface of the receiver 12. Push the ‘Slide Locking Lever’ (10) until the flat section of the lever is coincident with the right sight of the receiver. Do not push it all the way through. Note: The extractor spring is easily obtained from a lighter (the longer spring) with no length adjustments 13. Insert the magazine catch lever spring into the slot inside the receiver between two curves surfaces such that it latches onto a cutout in the magazine catch lever Note: An alternative assembly is described down below&nbsp;Alternative Magazine Catch Lever Assembly Steps: <img src="https://makerworld.bblmw.com/makerworld/draft/228112/2023-11-25_829bee564f378.png"> 1. Insert the ‘Magazine Catch Lever’ (2) into the receiver such that the lever is in it's default position (i.e. left side is flush with the grip) 2. Slide the ‘Catch Lever Spring Carrier’ (1) from the top of the receiver into the slot and push thru until flush with the catch lever 3. Slide the ‘Catch Lever Spring’ (3) into the catch lever, aligning it with the square guide extrusion 4. Compress the spring until it is properly seated on the guide extrusion on the carrier Note: Slight preload is applied when the spring is fully and properly seated. See “Spring Specifications” for spring dimensions. The spring is easily obtained from a lighter (fork spring (if with a spark wheel) or igniter spring (if with a push-button igniter)) Recoil Group Assembly Steps: <img src="https://makerworld.bblmw.com/makerworld/draft/228112/2023-11-23_afe3302aa44a1.png"> 1. Slide the ‘Recoil Spring Spacer’ (2) down the ‘Recoil Guide Rod’ (1) all the way down 2. Slide the ‘Recoil Spring’ (4) all the way down, until flush with the spring spacer 3. Compress the spring slightly and attach both ‘Recoil Spring Clamps’ from boths sides of the guide rod until the ends are coincident Note: The recoil spring is to be bought within the listed specifications or tested at the spot with a fitting off-the-self spring Slide Assembly Steps: <img src="https://makerworld.bblmw.com/makerworld/draft/228112/2023-11-23_cc860e019a99a.png"> 1. Insert a spring into the rear circular slot in the slide and push the ‘Slide End Cap' (6) up into the slide until fully seated. Note: The slide end cap is not intendet to be disassembled. The spring should be stiff enough to apply sufficient amount of pressure to hold the cap in place. 2. Insert the ‘Sights Contrasts’ (5) into the 'Front Sights' (1) and ‘Rear Sights’ (4) until flush with the surface. Note: It is highly recommended to print the contrast inserts with glow in the dark or stark white filament 3. Insert the extractor spring (not depicted in the drawing) into the appropriate slot on the left side of the slide. 4. Insert the ‘Extractor’ (3) into the slot and lock it in place with the ‘Extractor Pin’ (2) by inserting it through the upper thru hole on the left side of the lost, until the pin is flush with the hole. 5. Tilt the barrel (approximately) 30 degrees, aligning the sides parallel to the slide sides and push it through until you are able to tilt it back flush with the slide. 6. Insert the ‘Recoil Group Assembly’ (8) end cap (solid front end) into the lower hole and push the guide rod thru until the rod can be aligned with a slot in the barrel, then release. Note: The extractor spring is easily obtained from a lighter (the smaller spring) with minial length adjustments Clip/Magazine Assembly Steps:<img src="https://makerworld.bblmw.com/makerworld/draft/228112/2023-11-23_1f3e2b6765c74.png"> 1. Slide the ‘Follower’ (3) into the magazine (1) from the bottom 2. Insert the included spring (5, not depicted in the drawing) or an appropriate magazine spring 3. Insert 'Magazine Bottom Plate Retainer' (4) and compress the spring by pressing it down into the well 4. Slide the ‘Magazine Bottom Plate’ (2) onto the magazine until flush on all sides and retainer plate is engaged. The spring will apply pressure to hold the plate in place. Note: The recoil spring is to be bought within the listed specifications or tested at the spot with a fitting off-the-self spring Complete Assembly: <img src="https://makerworld.bblmw.com/makerworld/draft/228112/2023-11-23_b5c07a2c44db2.png"> 1. Place the slide up on the frame top surface aligned with the front mounting rails, with the slide locking block flush with the frame pull the slide to the rear until it is fully seated in the receiver. 2. Push the slide locking lever forward until it is flush with the receiver and rotate clockwise until it is parallel with the cutout. 3. Insert the magazine into the magazine well on the receiver and push up until the magazine catch lever engages the magazine and locks it in place.

SP PP9 - Functional Handgun Toy

Stigern

EDIT: Added a file with better quality.&nbsp;A decoration statue.&nbsp;PS:&nbsp;If you enjoy my designs and maybe want to contribute, you can make a small donation to <a target="_blank" href="https://www.paypal.com/donate/?business=T3KK6HAMWRUPL&no_recurring=0&item_name=If+you+like+my+designs+and+want+to+contribute.&currency_code=NOK" rel="nofollow noopener">paypal, </a>that will be greatly appreciated.

Woman Sculpture Decoration/Statue

people

mariu5

Simple all-purpose tweezers.Useful for handling small pieces or parts while soldering or sorting small items. I'm sure you can all find many uses for tweezers. It prints in about 15 mins and uses 5g of filament. Suitable for finishing the last 2m of filament.Added mouse ears to avoid warping and help with adhesion of the thinner areas. If you wan to user them with your other projects, you can find them here: <a target="_blank" href="https://makerworld.com/en/models/53237#profileId-55002" rel="nofollow noopener">https://makerworld.com/en/models/53237#profileId-55002</a>

All-purpose tweezers

work

leoax19980

This phone stand is design for any phone or even a tablet

Minimalist Phone/Tablet Stand

phone

Hardware needed:4x M4 Heatset Instert4x M4-20 Socket head2x M4-12 Socket head&nbsp;It able to hold the gimbal Sony FX30 with Sigma 18-50mm F2.8.It should be able to hold about 3kg of payload

机器人

建筑

PC

car

家用

a1

船

相机

动物

art

game

过年

gan

people

work

phone

dji