twosunangel

IK3Digital

“If you like this model, please consider giving it a boost! Or even better two boosts! It will help me a lot 😊”&nbsp;This adorable baby dragon is bursting with charm and whimsy, making it the perfect addition to any collection or decor.&nbsp;It looks beautiful printed in a single color but even better in colors.&nbsp;I decided to use Spyro colors on him and it suits him very well!&nbsp;Get creative and please share your makes so I can keep creating more beautiful models.&nbsp;Print at 0.16mm layer height or lower to show well all the details, I printed mine at 60mm tall and can be scaled up. If you scale it down you will loose the detail of the scales. 2 Walls and at least 3% rectilinear infill is recommended.&nbsp;All of my models are for personal use only, unless you are an active member of my Patreon or my Thangs with a commercial license.&nbsp;<a target="_blank" href="http://patreon.com/ik3d" rel="nofollow noopener">http://patreon.com/ik3d</a><a target="_blank" href="https://thangs.com/designer/IK3D" rel="nofollow noopener">https://thangs.com/designer/IK3D</a>&nbsp;&nbsp;

Adorable Baby Dragon / No Supports

Save for Later

RustyTractor

Having a bad day?In need of constant approval?Don&#39;t wait for someone else to lift your spirits, give yourself a thumbs up with this unique bionic styled decorative piece.<ul><li>No supports needed.</li><li>Can be printed without Brim (well I did)</li><li>Self-supporting with flat, level base</li></ul>Tested in PLA with standard print profiles. Cooling may be required for the overhangs depending on your printer.This is the first model I have ever posted anywhere so hit that thumbs up if you like my thumbs up.&nbsp;&nbsp;

Bionic Thumbs Up Sculpture

yoga

Every Day Counts

Here is the Fidgety Python for all who like to fidget and make shapes.&nbsp;Please post pictures of your prints - especially if you use multiple colours.&nbsp;IMPORTANT: This design has some pretty tight joints when it is taken off the print bed. For perfect results, ensure that your filament is tuned (https://wiki.bambulab.com/en/software/bambu-studio/calibration_flow_rate). Use only a 0.4mm nozzle. I&#39;d recommend PLA only, and stay away from silk variants. The size of the print CANNOT be scaled down because of the tight tolerances in the joints.&nbsp;When freeing the joints for the first time, I recommend using the sharp edge of a table to support the snake while you put pressure on each joint. They will all free up, but it will take a little effort. It&#39;s worth it!&nbsp;A shorter version of this model, which takes less filament and less time to print, is available at https://makerworld.com/en/models/65617#profileId-68947

Save for Later

yoga

alan