Twela

GlennovitS 3D

This is a post-it holder for the Gridfinity system - store a stack of post-it/notes on your desk - ready to use! It looks clean and can be stacked on top of other Gridfinity items - kind of like a lid.<figure class="image image-style-side"><img src="https://makerworld.bblmw.com/makerworld/draft/437940/2024-01-19_7301334c063288.jpeg"></figure><h2>Sizes</h2>Files are named AxBxC<ul><li>A: Width of the grid (each section is 42 mm - fx. 2 = 84 mm)</li><li>B: Length of the grid (each section is 42 mm - fx. 2 = 84 mm)</li><li>C: Height of the box (each section is 7 mm - fx. 3 = 21 mm heigh)</li></ul>The Post-It Holder come in multiple different sizes<figure class="image image-style-side"><img src="https://makerworld.bblmw.com/makerworld/draft/437940/2024-01-19_c82080d5546888.gif"></figure><h2>Want more Gridfinity? YES!</h2>Maybe start with some boxes for the Gridfinity system.Or maybe want a tray, pen holder, circular holder or more? - see my other projects!<a target="_blank" href="https://makerworld.com/en/u/1370313339/collections/427128" rel="nofollow noopener">https://makerworld.com/en/u/1370313339/collections/427128</a><h2>Print instructions</h2>These tips can maybe help<ul><li>Speed on first layer: 50% (or less) (To ensure good bed adhesion and perfect fit)</li><li>Infill: 15% Lightning (No need to waste to much filament)</li><li>Perimeters: 2 (Works strong enough)</li><li>Supports: NO supports needed on all parts!</li></ul>&nbsp;Happy printing!And special thanks to Zack Freedman for starting the Gridfinity System!&nbsp;<h2>Want to show your support?</h2>You can see ALL my designs on Printables - and you can become an active supporter. I would really appreciate it!⭐️ <a target="_blank" href="https://www.printables.com/@GlennovitS3D" rel="nofollow noopener">https://www.printables.com/@GlennovitS3D</a> ⭐️

Gridfinity Post-It Holder - Easy to use, clean look

Gridfinity

Clay2F

<h3>EN:</h3>Since I wanted to construct various holders and test them before printing, I created the hole pattern of the Skadis walls from Ikea as a step file.&nbsp;<h3>DE:</h3>Da ich mir diverse Halter konstruieren und vor dem Druck prüfen wollte, habe ich mal das Lochraster der Skadis Wände von Ikea als Stepdatei erstellt.&nbsp;

IKEA Skadis

Skadis

SirPrintAlot

This is a 100% 3D printable bowden/PTFE tube connector for the all printers.&nbsp;You can also see my other printable add-ons for the Bambulab printers:<img src="https://makerworld.bblmw.com/makerworld/draft/846495/2024-04-12_e41d160de18128.jpg"><a target="_blank" href="https://makerworld.com/en/models/424181#profileId-327470" rel="nofollow noopener">https://makerworld.com/en/models/424181#profileId-327470</a> (Light weight poop chute (30g))<a target="_blank" href="https://makerworld.com/en/models/213926#profileId-233439" rel="nofollow noopener">https://makerworld.com/en/models/213926#profileId-233439</a> (AMS button adapter with PTFE tube)<a target="_blank" href="https://makerworld.com/en/models/402613#profileId-304285" rel="nofollow noopener">https://makerworld.com/en/models/402613#profileId-304285</a> (Dual purpose bed scraper)<a target="_blank" href="https://makerworld.com/en/models/393265#profileId-294453" rel="nofollow noopener">https://makerworld.com/en/models/393265#profileId-294453</a> (Y-splitter connector for PTFE tube)<a target="_blank" href="https://makerworld.com/en/models/375898#profileId-275865" rel="nofollow noopener">https://makerworld.com/en/models/375898#profileId-275865</a> (Drybox IKEA samla 22l)<a target="_blank" href="https://makerworld.com/en/models/404520#profileId-306293" rel="nofollow noopener">https://makerworld.com/en/models/404520#profileId-306293</a> (Purge strip bin for Bambu P1S)

Bowden/PTFE tube connector

Printer Tools

LeeBob

Introducing the 3D printer-optimized version of the renowned black stick/spudger tool, a staple in tech kits and famously associated with Apple. If you&#39;re familiar with this tool, you already know its versatility and essential uses. After breaking mine, I decided to create a version as close as possible using PLA for 3D printing.&nbsp;One of the standout features of this design is the ability to print it in any color you prefer, adding a personalized touch to your toolkit. Additionally, I&#39;ve added a small label, &#34;LB,&#34; as a nod to my initials, naming it the LB Stick.&nbsp;I&#39;d love to hear your feedback and see your prints! Whether you&#39;re sharing your printed versions or stories of how this tool has been helpful to you, it would mean a lot to me. Printing one of these takes approximately 15 minutes, making it a quick and satisfying project.Happy printing!&nbsp;Seeing your prints is the highest compliment I can receive!

Black Stick Spudger - Tech Repair Tool

Tech

PrintinPlace

<h2>THE POOP SCREAM</h2>&nbsp;How many times have you screamed in fear after seeing how much your printer pooped? This is the representation of the face of each of us, every time we collect tons of purge.&nbsp;Shopping List:&nbsp;<ul><li>150x100x1 mm acrylic glass</li><li>A little drop of superglue</li></ul>Filament i used:<ul><li>Brown PLA By amazon</li><li>eSun Bones White PLA</li><li>eSun Black PLA</li><li>Creality White Sparkle PLA</li><li>eSun Red PLA</li></ul>The only piece that requires gluing is the character. the rest of the frame is interlocking.&nbsp;Here you can Find the assembly Video:&nbsp;<a target="_blank" href="https://www.tiktok.com/@printinplace/video/7360012546155302176" rel="nofollow noopener">https://www.tiktok.com/@printinplace/video/7360012546155302176</a>&nbsp;I decided not to glue the poops, but you can glue them to prevent them from moving, or you can take a nice resin bath for a more spectacular effect!&nbsp;And That&#39;s it! &nbsp;HAPPY PRINTS

The Poop Scream - Frame Box

Printer Art

SabreDesign

Modern Pen Holder stand to hold and display up to three pens in a stylish modern way.&nbsp;Easy print, can hold pens up to 150mm wide&nbsp;If you want to support me you can join a patreon membership: https://www.patreon.com/SabreDesign&nbsp;Check out more of my designs below and on my profile:<img src="https://makerworld.bblmw.com/makerworld/draft/836520/2023-12-30_2b9c4c54fc7a9.png"> <img src="https://makerworld.bblmw.com/makerworld/draft/836520/2023-12-27_4dd127cfa82f5.png"> <img src="https://makerworld.bblmw.com/makerworld/draft/836520/2023-12-27_2951845da928b.png">

Pen Holder

Household

Brian Dean

<h2>Embedded Magnet Dispenser Tool for Multiple Diameters and Thicknesses</h2><h3>PROFILE NOTE</h3>Please use the “Designer” profile as it guarantees the latest files and version with all new magnet sizes and features. The Designer Profile will be listed at the top.<h3>Latest Update (2024-04-21): Quick summary</h3><ol><li>additional magnet sizes</li><li>magnet size text embossed on the barrel and also included on the slider</li></ol>See below for the more detailed update notes.<h2>Magnet Dispenser for 3D Prints: Simplify Magnet Insertion with Precision</h2>The Magnet Dispenser Tool is expertly designed to streamline the insertion of magnets into 3D prints. This tool not only speeds the process of inserting magnets into 3D Prints, it also ensures correct orientation and secure fitting, making it ideal for projects that require precise magnet placement.<h3>Key Features</h3><h4>Dual Dispensers for Perfect Alignment</h4><ul><li>Includes two dispensers for each magnet size – one for north-up and one for south-up orientations</li><li>Use different colors (e.g., red for north-up and blue for south-up) to help easily identify the dispenser&#39;s orientation</li><li>Eliminates the hassle of misaligned magnets</li></ul><h4>Design and Utility</h4><ul><li>Developed after extensive refinement</li><li>Allows for friction-fit insertion and is also suitable for magnets that are glued</li><li>Tapered tip facilitates use in tight spaces</li></ul><h4>Ease of Use</h4><ul><li>The dispensers are designed to accommodate the specified magnet sizes for their internal holding magnets, but can dispense magnets of any thicknesses for the specified diameter. For example, for the 6x3mm dispenser, you will need 6x3mm magnets to assemble the dispenser, but once assembled, that dispenser can dispense any 6mm diameter magnet such as 6x1, 6x2, 6x3, 6x5, etc.</li></ul><h4>Convenience and Storage</h4><ul><li>Features a snap-on cap with an embedded magnet and a top slider magnet</li><li>Ensures secure storage and prevents accidental magnet spillage</li></ul><h4>Customization and Printability</h4><ul><li>No supports needed for printing</li><li>STL and STEP files included for personal customization</li><li>Compatible with PETG, PLA, ASA, ABS, etc</li><li>Adjust x/y hole compensation if needed for perfect fit</li></ul><h4>Visual Guide</h4><ul><li>Fusion 360 images provided for easy assembly and understanding of the internal mechanism</li></ul><h4>Use the Magnet Dispenser for a hassle-free, precise, and efficient magnet insertion experience in your 3D printing projects.</h4><h3>Supported Magnet Sizes</h3><h4>Dispensers are now provided for the following magnet sizes as of Version 5</h4><ol><li>2x1mm</li><li>2x2mm</li><li>2x3mm</li><li>3x1mm</li><li>3x2mm</li><li>3x3mm</li><li>4x1mm</li><li>4x2mm</li><li>4x3mm</li><li>5x1mm</li><li>5x2mm</li><li>5x3mm</li><li>6x2mm</li><li>6x3mm</li><li>7x2mm</li><li>7x3mm</li><li>8x2mm</li><li>8x3mm</li><li>8x4mm</li><li>9x2mm</li><li>9x3mm</li><li>10x1mm</li><li>10x2mm</li><li>10x3mm</li><li>12x2mm</li><li>12x3mm</li><li>15x2mm</li><li>15x3mm</li><li>20x2mm</li><li>20x3mm</li></ol>NOTE 1: The 1mm magnet thickesses are just too thin to work reliably with the friction-fit of the slider and caps. Therefore, I have made the pockets of the “1mm” thickness magnet dispensers to be that of the 3mm variety so that they work. So to assemble a 1mm magnet thickness dispenser, you will need to purchase a few 3mm thick magnets to assemble the dispenser. A 2mm thickness will likely work ok, too. Note that the text on the dispenser will still say “D x 1 mm” for the barrel, “Dx1” on the cap, and “D/1” on the slider, so you know what magnets you have loaded into it.&nbsp;NOTE 2: the above are the sizes needed to assemble the dispenser. The dispenser can still dispense any thickness of magnet as long as the diameter is the same. So if don&#39;t see your specific magnet thickness listed above, you can still print the correct diameter, assemble the dispenser with the correct magnet thickness, and dispense other thicknesses.&nbsp;STEP and STL raw files are included if you do not wish to use the provided profile.<h3>Quality Assurance Testing</h3><ul><li>All dispenser sizes have been printed by me and extensively tested</li><li>I have purchased all magnet sizes at significant expense to myself to ensure fit</li><li>Magnet diameters are tricky for press-fit tolerance and controlled by no less that 5 Fusion 360 parameters that must be balanced to achieve good fit<ul><li>Multiple iterations of each dispenser were printed and refined</li><li>Many kilograms of filament and hundreds of hours of print-time were consumed during this process</li><li>All to ensure the best quality printing and fit-up for each dispenser size</li></ul></li></ul><h3>About the Profiles</h3><ol><li>Please use the “Designer” profile as it guarantees the latest files and version with all new magnet sizes and features. The Designer Profile will be listed at the top.</li><li>NOTE: The “Designer” profile is a single profile that contains plates for all magnet sizes so far. Please ignore the “total time” reported by MakerWorld for the profile. You only need to print the plate(s) that you need. Each plate takes about 2.5-2.9 hours on my X1C using the included “PETG” profile which is slowed down for good PETG layer adhesion and quality.</li><li>While the other profiles may be ok, their file / update version may be out of date. So if you want the latest sizes and model improvements, please choose the top “Designer” profile.</li></ol><h3>Accessories</h3>Be sure and check out some nice accessories that other folks have created to work with these dispensers.<ul><li>Tip Caps - these are nice caps for the dispensor tip. Not only do they help keep the magnets contained within, but they also protect the tip. Additionally, they are labeled with the magnet size, which is nice. Thank you @onegotowned ! <a target="_blank" href="https://makerworld.com/en/models/149038#profileId-162633" rel="nofollow noopener">https://makerworld.com/en/models/149038#profileId-162633</a></li><li>Vertical Workbench Stand - This is a very nice stand for select diamagers made by @nickramsey57. A number of folks have asked about stands / organizers for the dispensers, so this model will likely be useful to a number of folks. Thank you @nickramsey57 ! <a target="_blank" href="https://makerworld.com/en/models/206388#profileId-226561" rel="nofollow noopener">https://makerworld.com/en/models/206388#profileId-226561</a></li><li>Vertical Workbench Stand (parametric) - Here is another very nice stand made by @RevHazlett. You can specify the dispenser sizes that you want it to hold and then generate, making it customizable to your needs and the common magnet sizes that you use. Thank you @RevHazlett! <a target="_blank" href="https://makerworld.com/en/models/435087#profileId-340031" rel="nofollow noopener">https://makerworld.com/en/models/435087#profileId-340031</a></li></ul><h2>Update History</h2><h3>Version 5: 2024-04-21</h3><ol><li>Emboss the magnet size text on the Barrel (see photos), allowing one to view the size from the side, and also allowing one to print all of the barrels on a single plate and not get the barrels mixed up as to what size they are for.</li><li>Include the magnet size text on the Slider (see photos), allowing one to print all of the sliders and caps together on one plate and not get the sliders mixed up as to what magnet size they are for. Also provides additional text identification of the magnet size within.</li><li>Include 11 new magnet sizes:<ol><li>3x1mm</li><li>4x1mm</li><li>5x1mm</li><li>7x2mm, 7x3mm</li><li>8x4mm</li><li>10x1mm</li><li>15x2mm, 15x3mm</li><li>20x2mm, 20x3mm</li></ol></li><li>Re-organize the plates so that they are a little easier to manage. All dispenser sizes for each “diameter” are spread across three plates now - the Barrels, the Red Caps and Sliders, and the Blue Caps and Sliders. This allows one to “print-by-layer” instead of “print-by-object”, and the text also comes out better. Additionally, it is now easier to construct a plate with all of the size variations on 3 individual plates and print them all at once.</li></ol><h3>Version 4: 2023-12-26</h3><ol><li>Fixed an issue where the smaller diameter magnets such as the 2mm, 3mm, and possibly the 4mm magnet diameters could inadvertently slip through the vertical barrel slider stem slot. Prior to this update, the slider stem was a fixed 3mm + tolerance width. With Version 4, the slider slot is now dynamic based on the magnet diameter. So now, the smaller diameter magnets are captive within the barrel and cannot slip out inadvertently.</li><li>Tighten up the tolerances between the “slider” and the “barrel” for a better fit and smoother operation.</li><li>Use the Profile: “Version 4: All Sizes …” for the latest from this update.</li></ol><h3>Version 3: 2023-12-22</h3><ol><li>Added additional magnet sizes<ol><li>2x1mm, 2x2mm, 2x3mm</li><li>9x2mm, 9x3mm</li></ol></li><li>Text is now added within the Fusion 360 Model File, eliminating the need to add the text using Bambu Studio<ol><li>Ensures consistent text placement and easier colorizing of the text</li></ol></li><li>All plates are included for all magnet sizes, two dispensers per plate, print sequence: print-by-object</li></ol><h3>Version 2.1: 2023-11-28</h3><ol><li>Added additional magnet sizes<ol><li>3x2mm</li><li>4x2mm, 4x3mm</li><li>5x2mm, 5x3mm</li><li>6x2mm</li><li>8x2mm, 8x3mm</li><li>10x2mm, 10x3mm</li><li>12x2mm</li></ol></li><li>The magnet size text is included on the cap for easy identification - see photo</li></ol><h3>Version 2: 2023-11-20</h3>Updated to “Version 2”. Significant updates an enhancements have been made, some seen, some unseen.<ol><li>Added additional magnet sizes<ol><li>3x3mm</li><li>12x3mm</li></ol></li><li>Each magnet size is on its own plate, two dispensers per plate, print sequence: print-by-object</li><li>Redesigned “thumb slider” for greater comfort and stronger press force</li><li>Slider stem has been reinforced</li><li>Many enhancements for smoother operation with internal chamfers and fillets, enhanced tolerances, and strengthening of key internal components</li></ol>&nbsp;&nbsp;&nbsp;

Embedded Magnet Dispenser Tool for 3D Prints

Build Tools

luckyluc.64

The best PTFE guide plus PTFE Release (no tools require).There it is. Many Makers asked me for this after seeing the one I designed for the AMS Hub.<a target="_blank" href="https://makerworld.com/en/models/73523#profileId-77971" rel="nofollow noopener">https://makerworld.com/en/models/73523#profileId-77971</a>Since the location is good, I didn&#39;t add a subplate and relocate the buffer. The drawback is that I only have a little wire management.&nbsp;In a certain way, it&#39;s better because there are no holes to tap or screws. It just &#34;Smap in place&#34;.It&#39;s also easy to assemble;-Release the two PTFEs from the buffer.-Snap the central part on top of the AMS Buffer. (See the pictures above) (injector end first and snap the other end)-Slide in the two PTFE guides and secure them with the &#34;C&#34; ring. (The longer one goes in the Injector side)-Push in the two PTFEs. Tug them back to see if they lock in place.It&#39;s ready to go. Thanks to the realignment of the PTFE in the fittings, you won&#39;t need other tools and will avoid jams.It&#39;s not a bad idea to chamfer the inside of the PTFE after cutting it.&nbsp;After printing, make sure the holes are clean. The guide should slide easily and freely into their mount. It may require a little filling in the bores.&nbsp;I did test it with PLA. And the small tube broke. Then, No, you can&#39;t use PLA.I test-printed it with PETg, which prints well for the P1P one. It works well, and no support is needed (But it can&#39;t hurt). I didn&#39;t have to file or sand the bore, but it may be required (Especially if you use generic material and print on a series P1; the flow is critical). The injector side guide must slide freely, and the PTFE should slide into the guide freely. It doesn&#39;t matter if the PTFE slides into the guide or the guide slides with the PTFE.Of course, I did make it in ABS. It&#39;s the best for me and my favorite BBL Blue ABS.&nbsp;It prints in an hour and a half in PETg and is even faster with ABS.Enjoy.