truford.jf

BaGooN

<p>This 2-digit counter boasts a stylish design! It features a wheel with a satisfying click. Each number comes to a stop with a click. and easy snap on assembly. <br><br><strong>Assembly: </strong></p><p>0. print a total of 5 parts: ‘Case_M’, ‘Case_F’, ‘Spring’, ‘Wheel_A’, and ‘Wheel_B’. Choose either the Standard or Reversed case, and select either Normal or Soft for the spring.</p><figure class="image image_resized image-style-align-center" style="width:357px;"><img src="https://media.printables.com/media/prints/703486/rich_content/7362f4e4-28b5-4ab5-acef-db401e1f07f8/pxl_20240103_060235384portraitoriginal.jpg"></figure><p>1. Put the wheel onto the 'case_M' part and check its rotation. If it feels stiff, use sandpaper or apply a small amount of grease to the inside of the wheel. (When you choose the reversed design case the wheel numbers must be placed downward.)</p><figure class="image image_resized image-style-align-center" style="width:357px;"><img src="https://media.printables.com/media/prints/703486/rich_content/f0535263-8f1b-4168-b592-04e314f1de00/pxl_20240103_060300968portrait.jpg"></figure><p>2. Put the spring onto the ‘case_M’ part.</p><figure class="image image_resized image-style-align-center" style="width:357px;"><img src="https://media.printables.com/media/prints/703486/rich_content/fec23d3a-15b6-4ffa-83a8-a7e0b2deae25/pxl_20240103_060321955portrait.jpg"></figure><p>3. Snap-on the opposite side of the case.</p><figure class="image image_resized image-style-align-center" style="width:357px;"><img src="https://media.printables.com/media/prints/703486/rich_content/f83631a3-d42f-4bd9-b06d-afe685202bfa/thumbs/cover/800x600/jpg/pxl_20240103_060419489portrait.webp"></figure><p><strong>Notes:</strong></p><ul><li><strong>Recommended layer height: 0.15 - 0.20mm</strong>, In my case with slicer, layer heights above 0.28mm, the spring, wheel clearance lost are do not function.</li><li><strong>Do not use Matte PLA, Silk PLA, as they have weak layer adhesion and can break with snap-on.</strong></li></ul>

Clicky Rotate Counter

Games

Shaztech.info

<p>8 Trays HDD Box for NAS/Server</p><p>Fully printed enclosure (you can print the external case or make your own in wood/metal/aluminium)</p><p>Using long SATA/SAS cables, so no complicated electronics</p><p>All parts are easily available on Amazon/Aliexpress/Ebay</p><p>Trays are available for 3.5 and 2.5in HDD/SSD</p><p>&nbsp;</p><p>Connect the fan to the 12V wire (Yellow)</p><p>Connect the LED with the resistor to the 5V wire (Red)</p><p>&nbsp;</p><p>Overall dimensions: 268mm (10.55 in) wide, 214mm (8.43 in) depth, 152mm (6 in) Height</p><p>&nbsp;</p><p>Bill of Materials:</p><p>42x - Torx Screws #4 x 1/2&#34; - McMaster #99512A219<br>8x - Socked Head Screws M3 x 22mm - McMaster #91290A124<br>1x - Computer Fan 120mm (with 4 screws)<br>1x - 5mm LED + resistor<br>2x - Quad SATA 1 Meter Cable (or SAS if you have a card) (see pictures)<br>8x - SATA Adapters Male to Female Straight (see pictures)<br>8x - SATA Power connector (Puncture type without soldering, can be salvaged from old cables) (see pictures)<br>Some 16 gauge wires to create your power cable (2x Female molex to one end)</p><p>&nbsp;</p><p>If you want smaller check my 4 Trays box.</p><p>(12 Trays 3U rack mountable coming soon….)</p><p>&nbsp;</p><p><a target="_blank" href="https://www.buymeacoffee.com/shaztech_info" rel="nofollow noopener"><strong>Buy me a coffee</strong></a></p>

8 Trays HDD Enclosure (SATA/SAS)

homelab

mklements

<p>This enclosure is designed to house a Raspberry Pi 5 and the Radxa Penta SATA Hat to build a desktop NAS.</p><p>&nbsp;</p><p>There are two primary options, leading to four variants.</p><ul><li>With or without an acrylic window - this adds to the design aesthetic but may be difficult to make up without the correct tools</li><li>With or without holes for brass inserts - if brass inserts are not used, the holes are sized for M2.5 screws to be used directly</li></ul><p>Visit my blog for the full parts list with suggested purchase links and the assembly and setup guide - <a target="_blank" href="https://www.the-diy-life.com/i-built-a-4-bay-raspberry-pi-5-based-nas/" rel="nofollow noopener">https://www.the-diy-life.com/i-built-a-4-bay-raspberry-pi-5-based-nas/</a></p>

Raspberry Pi 5 Four Bay NAS

MikeProch

<p>Download the "raw model files" where you can find the temp tower with temperature adjustment !!! Only 38 min + time for calibrating. Makerworld does not support uploading M3F files with editing so for this reason I gave the file to the raw model files.. Enjoy ! ☺️🤌</p>

PETG temp tower 235 up to 260

Printer calibration

Jeep Things

Kato22

<p>A combined desiccant and hygrometer holder that slips into the pour hole of the lid of a plastic dry goods box. I like this approach as it is neater than using baggies. With this setup, I can get internal humidity down to 10-15%.</p><p>&nbsp;</p><p>Additional Materials (I bought from Amazon - not affiliated with any of them):</p><ul><li>Wildone Cereal Storage Containers (6)</li><li>Tasogen 12 Pack Mini Digital Thermometer/Hygrometer</li><li>Dry & Dry 1 Quart Orange Premium Desiccant Indicating Silica Gel Beads</li></ul><p>Features</p><ul><li>Plugs into existing hole in storage container lid. You can pull off the existing hinged plug on container lid for a nice, clean look</li><li>Desiccant can be accessed without taking container lid off</li><li>Desiccant is up where humidity is highest and there is room for a generously sized desiccant cup</li><li>Quarter turn connection between lid and cup ensures correct alignment of hygrometer</li></ul><p>&nbsp;</p><p>This Filament Storage Solution Inspired by:</p><ol><li>Josh Murrah filament storage solution:</li></ol><figure class="media"><div data-oembed-url="https://youtu.be/LdUtvISRF0s"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/LdUtvISRF0s" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure><p>&nbsp;</p><p>2. Mordiev's Desiccant Dome:</p><p><a target="_blank" href="https://www.printables.com/model/28925-desiccant-dome" rel="nofollow noopener">    https://www.printables.com/model/28925-desiccant-dome</a> </p>

Combined Desiccant Cup / Hygrometer Mount for Filament Dry Box

Dry Box

RobDrivesCars

<p><strong>This model has been updated to a new link on 06/29/2024</strong></p><p>&nbsp;</p><p>Rick Roll QR Code adapted from a TV model. It links directly to an autoplay video with no ads. The corners have been filleted.</p><p>&nbsp;</p><p>This is pre-sliced as a multi-color print for your printer with an AMS. Just print and go!</p>

Rick Roll QR Code - UPDATED - No Ad, Autoplay, RTP

Things to print

Jorge Rui

<h4>Description and contextualization</h4><blockquote><p>A present to you, a Rack for the Mutil-Modular Storage System (MMSS) that I've been developing. Don't go running to buying a ton of filament, first you must understand how this work....</p><p>You can do it step by step.</p><p>You can start with a simple model, and store it in your closet, some drawer, or card box; a month later, you may buy something else and print the corresponding module to store your precious component or accessories. Someday, you may need a box or maybe a case (if you have to transport your things) to store the modules you already have…</p><p>In the limit, some people, need a complete rack, because they have a lot of things (maybe a print farm).</p><p>But this rack, on its own, has the Build plate dispenser, and for most people, this project ends there. But you are like my, and make things scalable and that's why this is all modular.</p></blockquote><h3>Introduction</h3><p>This rack serves as a support to the different projects carried out around what I can already call an ecosystem, namely; </p><ul><li><a target="_blank" href="https://www.printables.com/model/556159-multi-modular-storage-system-mmss" rel="nofollow noopener">Multi-Modular Storage System -MMSS</a> </li><li><a target="_blank" href="https://www.printables.com/model/557727-box-with-lid-for-mmss" rel="nofollow noopener">Box with lid for MMSS</a></li><li><a target="_blank" href="https://www.printables.com/model/556615-case-for-the-mmss" rel="nofollow noopener">Case for the MMSS</a></li></ul><figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_yakhnxubxzta.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_h8ksq5b2vafv.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_opyjqt3vl1be.jpg"></figure></td></tr><tr><td><a target="_blank" href="https://www.printables.com/model/556159-multi-modular-storage-system-mmss" rel="nofollow noopener">Multi-Modular Storage System -MMSS</a> </td><td><a target="_blank" href="https://www.printables.com/model/557727-box-with-lid-for-mmss" rel="nofollow noopener">Box with lid for MMSS</a></td><td><a target="_blank" href="https://www.printables.com/model/556615-case-for-the-mmss" rel="nofollow noopener">Case for the MMSS</a></td></tr></tbody></table></figure><ul><li>The amount of modules you can add is growing fast:<ul><li><a target="_blank" href="https://www.printables.com/model/557566-mmss-2x4-module-glue-stick-and-hexagonal-keys" rel="nofollow noopener">MMSS 2x4 Module - Glue Stick and Hexagonal Keys</a></li><li><a target="_blank" href="https://www.printables.com/model/557452-mmss-1x1-module-microsd" rel="nofollow noopener"><u>MMSS 1x1 Module - MicroSD</u></a></li><li><a target="_blank" href="https://www.printables.com/model/557397-mmss-1x1-module-nozzle-wipper" rel="nofollow noopener">MMSS 1x1 Module - Nozzle Wipper</a></li><li><a target="_blank" href="https://www.printables.com/model/557390-mmss-1x1-module-filament-cutter-microsd" rel="nofollow noopener">MMSS 1x1 Module - Filament Cutter + MicroSD</a></li><li><a target="_blank" href="https://www.printables.com/model/570948-mmss-1x1-module-filament-cutter" rel="nofollow noopener">MMSS 1x1 Module - Filament Cutter</a></li><li><a target="_blank" href="https://www.printables.com/model/559405-mmss-1x2-module-hotend-and-silicon-sock" rel="nofollow noopener">MMSS 1x2 Module - Hotend and Silicon Sock</a></li><li><a target="_blank" href="https://www.printables.com/model/561092-mmss-1x3-module-complete-hotend" rel="nofollow noopener">MMSS 1x3 Module - Complete Hotend</a></li><li><a target="_blank" href="https://www.printables.com/model/561215-mmss-2x3-module-small-scraper" rel="nofollow noopener">MMSS 2x3 Module - Small Scraper</a></li><li><a target="_blank" href="https://www.printables.com/model/564616-mmss-2x5-module-liquid-glue" rel="nofollow noopener">MMSS 2x5 Module - Liquid Glue</a></li><li><a target="_blank" href="https://www.printables.com/model/563208-mmss-various-size-modules-pocket-with-lid" rel="nofollow noopener">MMSS various Modules - Pockets with Lid</a></li><li><a target="_blank" href="https://www.printables.com/model/580675-mmss-2x3-module-spool-holder" rel="nofollow noopener">MMSS 2x3 Module - Spool Holder</a></li><li><a target="_blank" href="https://www.printables.com/model/567939-mmss-1x5-module-original-bambu-lab-scraper" rel="nofollow noopener">MMSS 1x5 bambu lab original scraper</a></li><li><a target="_blank" href="https://www.printables.com/model/618034-mmss-2x4-module-pocket-with-lid-for-bolts-and-magn" rel="nofollow noopener">MMSS 2x4 Bolts and Magnets Pockets with Lid</a></li><li><a target="_blank" href="https://www.printables.com/model/686267-mmss-2x2-module-extruder" rel="nofollow noopener">MMSS 2x2 Module - Hardened Steel Extruder Unit</a></li><li><a target="_blank" href="https://www.printables.com/model/613965-bambu-lab-ams-service-and-spares-parts-for-the-mms" rel="nofollow noopener">MMSS for AMS Modules</a> <ul><li>4x Active extrusion wheel assembly;</li><li>4x Active support shaft assembly;</li><li>4x PTFE Tube Fast Connector;</li><li>4x  Driven Support Shaft Assembly</li><li>1x First Stage Feeder</li></ul></li><li>More to come… I'm always adding new modules, please check <a target="_blank" href="https://www.printables.com/@jorge_rui" rel="nofollow noopener">my profile </a> and here on <a target="_blank" href="https://makerworld.com/pt/u/3059492201" rel="nofollow noopener">makerworld.com</a> for the later information, some are free, others are only available as exclusives for members of "<a target="_blank" href="https://www.printables.com/@jorge_rui/exclusive-models" rel="nofollow noopener">my club</a>".</li></ul></li><li><strong>This rack adds now support for the build plates.</strong></li></ul><figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_028behu1ai4g.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_r0t2wpt4b0hc.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_iynsbv28k7qz.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_e0zdl1u2l61m.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_0xxhhupg1j68.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_b96wxyl4ivi0.jpg"></figure></td></tr></tbody></table></figure><p>… and more</p><h3><strong>Assembly info</strong></h3><blockquote><p>Read carefully the explanation that fallows. I've tried to be systematic for anyone to understand. This os not a print of a small toy or a vase, you will need to make decision, so make them informed.</p></blockquote><p><strong>1- Start here - </strong>Assemble the base that will serve the build plates. if you have many you can stack them together.</p><p>    1.1 - All you need, and more, is available withing the file “<i><strong>rack_lower_module.3mf</strong></i>”.</p><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_90fcltoa6t1b.png"></figure><p><strong>2 - Now you have a choice to make:</strong></p><p>   <strong> 2.1</strong> - Stop here on the basic module for the build plates, or;</p><p>    <strong>2.2</strong> - continue to add other parts from the MMSS ecosystem.</p><p>If MMSS = 2.1 then;</p><p> You will need a cover like this to finish the job, you will find that part on the 3mf file regarding the rack for build plates</p><figure class="image image_resized" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_v5wp6a6k3st9.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_6wmgn4kaqu97.png"></figure><p><strong>Tip:</strong></p><p>For the <a target="_blank" href="https://shrsl.com/4cpnz" rel="nofollow noopener">PETG </a>springs, flex the back plate a little for them to slide on the dovetail. </p><figure class="image image_resized" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_cg9pvea3vxof.png"></figure><p>If MMSS = 2.2 then;</p><ul><li>you can add other rack for build plates, if really like build plates :) or;</li><li>add a MMSS box or case, or several of them. </li></ul><p>    <strong>2.2.1</strong> Ok, you need to add more modules on top of the “Base module" that serves the build plates. Now you can choose to continue with the barebone or the complete version.</p><figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_xvcygijnz78z.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_dgrggf1uh6w5.jpg"></figure></td></tr><tr><td><strong>2.3</strong> - Barebone rack</td><td><strong>2.4</strong> Complete rack</td></tr></tbody></table></figure><p>If MMSS = 2.3 then;</p><p><strong>2.3</strong> <strong>Barebone Rack</strong></p><p>If you go this way, you will need some new parts that you can find on the 3mf file “<i><strong>rack_middle_modules.3mf</strong></i>”.</p><blockquote><p>This drawing will help you choose the right heights for the spacers, almost all the parts are the same for any modules you choose, with the exception of the top.</p></blockquote><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_ezkcpjon3vvn.png"></figure><p>Easy, isn't it?    ;)</p><p><strong>        2.3.1 </strong>There are some parts that you will need to go up, in what I call, the middle steps. These parts can be found on the 3mf file stated on 2.3 point. You can stack modules on top of each other, most parts are the same, just be careful to choose the “Pillars” A, B or C depending on what you need, these will give you the space necessary for each module (see drawing above).</p><p>&nbsp;</p><p>&nbsp;</p><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_max8ix3ip37e.png"></figure><blockquote><p><span style="color:rgb(0,0,0);">See does red pins? They have to go with a tight fit, if you notice them loose on the guides or on the Pilar’s see if the filament is calibrated, sometime, certain materials shrink more than others, petg tends to be more stable… anyways if all fails, use the scale tool on the slicer to compensate.</span></p></blockquote><p><strong>        2.3.2</strong> At some point you will reach the top, and you will need to close the rack top.</p><figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_mzlwingfk9g9.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_572cuaywt1k1.png"></figure></td></tr><tr><td><strong>2.3.2.1</strong> - Normal top</td><td><strong>2.3.2.2</strong> - Top made with the lid from the Box for the MMSS</td></tr></tbody></table></figure><p>    <strong>2.3.3</strong> After choosing the top, you can print the corresponding modules from the “<i><strong>rack_tops_modules.3mf</strong></i>”.</p><p>If MMSS = 2.4 then;</p><p><strong>2.4 The complete rack</strong> - This will add some panels to the side of the rack, making it look like this:</p><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_kft5olj06k4q.jpg"></figure><blockquote><p>The aspect may vary depending on the modules you have chosen on the previous steps.</p></blockquote><p>    2.4.1 You can see that you will need different panels depending on the height of the modules, something very similar to the situation of the Pillars A, B and C.</p><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_qren5ivpbsnu.png"></figure><p>To print this, you must choose what you need on the file “<i><strong>rack_lateral_panels.3mf</strong></i>”</p><blockquote><p>If you have the “<a target="_blank" href="https://www.printables.com/model/556615-case-for-the-mmss" rel="nofollow noopener">Case for the MMSS</a>” with the lower Lid for the PTFE tubes, use the “Cover E”</p><p>If you plan to use the case with lid in one of the middle stages, you should use Pillar C and a new Cover; Cover F (Cover lateral panel_F.step)</p></blockquote><p><strong>Material to use</strong></p><ul><li>If you use this affiliate links to buy filament, it will cost you the same and I will get a small "kickback". Thanks !<ul><li><a target="_blank" href="https://shareasale.com/r.cfm?b=2354730&u=4026304&m=138211&urllink=&afftrack=" rel="nofollow noopener">Filament used on this project</a>, choose any color you like. For the greatest result and if your printer can do it, use <a target="_blank" href="https://shrsl.com/4cvrd" rel="nofollow noopener">PLA with carbon fiber</a>, amazing finish! Maybe it is time to test that sample you may have received with your printer (X1C users).</li><li>I've used in this project some <a target="_blank" href="https://shrsl.com/4cpnz" rel="nofollow noopener">PETG </a>too.</li></ul></li></ul><h3><strong>Change log:</strong></h3><ul><li><i>19-09-2023</i> - change the diameter of the TPU feet for better fitting. If you already have them, just put a little of TPU filament on the side if you find it to lose. </li><li><i>21-09-2023</i> - Better layout of the “rack_lower_module.3mf” file .  Thanks to <a target="_blank" href="https://www.printables.com/@amateur3d_939146" rel="nofollow noopener">Amateus3D</a></li><li><i>22-09-2023</i> - Back_plate_narrow has now stronger “pegs”. File changed “<i>rack_middle_modules.3mf</i>”. Thanks to <a target="_blank" href="https://www.printables.com/@hoonu_203988/makes" rel="nofollow noopener">hoonu</a>.</li><li><i>22-09-2023</i> - Lateral panels pegs should be stronger now. Change to some aspects of the layout on the 3mf file.</li><li><i>24-09-2023</i> - Small change to the small pin diameter, for stronger fit. File changed “<i>rack_middle_modules.3mf</i>”.</li><li><i>01-10-2023</i> - Added a new panel if you decide to use the box with lid in one of the middle stages (see description above in 2.4.1) - Thanks to <a target="_blank" href="https://www.printables.com/@thedevilsjeste_18993" rel="nofollow noopener">thedevilsjester</a></li><li><i>10-10-2023 - </i>Some members(1) reported some instability of the structure, namely the configuration that presents the top the “<i>normal top</i>” and already has some modules, so already with a certain height. This update is intended to address those issues. Thus, the updated components are:<ul><li>rack_tops_modules.3mf - in there the steps updated are:<ul><li>Top_plate_for_back.STEP</li><li>Top_plate_for_front.STEP</li><li>Top_plate_for_Front_right.STEP</li><li>Top_plate_for_Front_left.STEP</li><li>Top_plate_for_BPlate_right.STEP</li><li>Top_plate_for_BPlate_left.STEP</li></ul></li><li>If the structure is ok to you, that's because the fits are ok and all is working fine.</li></ul></li><li><i>12-10-2023 - </i>Bambu Lab logo was inverted, this can be found on file: “<i>rack_tops.3mf</i>” <ul><li>A new version of the pin was added that may offer a better fit in some situations. This new pin is found on file: “<i>rack_middle_modules.3mf</i>”</li></ul></li><li><i>18-10-2023</i> - Added a lid for the plain drawer: “<i>lid_simple_drawer.step</i>”</li></ul><h4><strong>Support the designer:</strong></h4><p>This design is free for the benefit of the community, but If you like my designs and want to contribute, you can make a donation to <a target="_blank" href="https://www.buymeacoffee.com/designrepcom" rel="nofollow noopener"><strong>buymeacoffee</strong>  </a>or <a target="_blank" href="https://www.paypal.com/donate/?business=BUM67EMDJRXSN&no_recurring=0&currency_code=EUR" rel="nofollow noopener"><strong>PayPal</strong></a><strong>.</strong></p>

Storage Rack for the MMSS

Printer Tools

benlevi

<h2>BLV - AMS Riser for X1C V3.1 Final</h2><figure class="table"><table><tbody><tr><td style="background-color: hsl(0, 0%, 30%)"><h3><span style="color: hsl(0,0%,100%)">Introduction</span></h3></td></tr><tr><td><p>I&#39;m Ben Levi, and I want to talk to you about this BLV AMS Riser that I designed:<br>So, when the AMS is sitting on top of the printer, you can&#39;t really see what the printer is doing, and you can&#39;t even open the top glass cover to let some air in when you&#39;re printing High temp stuff. basically, something that will hold the AMS and free your Glass top cover will be a good solution for that. Now I&#39;ve seen some similar AMS risers before, but none of them really wowed me.. i think..</p><p>That&#39;s why I decided to come up with this sleek BLV AMS Riser design, easy to use, easy to put together, and reliable. I even added two handy drawers for your tools and stuff, a special shelf that can hold up to 4pcs Build Plates, built-in Dual LED strips. Sure, it took me a while, but I got it (almost..) done.</p><p>As some of you may know, I love contributing to this wonderful community, which is why I chose to share with you my project without any fee or money. Among other things, I&#39;ve also given you access to the original CAD files (F3D,STEP) so that you can easily make changes, add, and improve as you see fit. Please, if you publish a remix, make sure to link it to the original project as a remix so that others can benefit from your effort. I kindly request not to use the files for commercial purposes without explicit permission from me.</p><p>&nbsp;</p><p>Thanks,<br><strong>Ben Levi</strong></p><p><a target="_blank" href="https://www.paypal.com/paypalme/BenBLV" rel="nofollow noopener">If you want, buy me a beer </a>:)</p><p>&nbsp;</p></td></tr></tbody></table></figure><figure class="image image_resized" style="width: 58.95%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-09-25_370cc55ef0c1d.png"></figure><h2>Main features</h2><p>These are just a few design features I&#39;ve planned. If you have more ideas, please share them with me, and I can incorporate them into the design. Also, feel free to add remixes (CAD files are available for download).</p><ul><li>Easy installation</li><li>Dual LED strip<br>installed in optimal angle for LiDAR.</li><li>AMS riser</li><li>Top glass Holder</li><li>2 drawers for tools (with version for tools)</li><li>4 x Build Plates holder</li><li>Rubber Gasket for the glass</li><li>Customised Panels</li><li>access to original buttons</li><li>No screws required</li><li>CAD files available (F3D,STEP)</li></ul><figure class="table"><table><tbody><tr><td><p>&nbsp;</p><figure class="image image_resized" style="width: 92.39%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_18d41f48cf37f.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_a237ff37d0da5.png"></figure></td></tr></tbody></table></figure><h2> </h2><h2>How to print and where to begin?</h2><p>I must admit, if you&#39;re in search of a quick two-hour print and you&#39;re finished, this may not be the right place for it. To initiate and successfully complete this project, a considerable amount of filament and time investment is necessary. Here are the essential resources you&#39;ll be required to invest:</p><figure class="table" style="width: 70.13%"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td><p style="text-align: center"><strong>Printing Time</strong></p></td><td>70~85 print hours - including color switching!</td></tr><tr><td><p style="text-align: center"><strong>Printer</strong></p></td><td>X1 Carbon, P1S, P1P, X1 or Other + AMS (Optional).</td></tr><tr><td><p style="text-align: center"><strong>Filament</strong></p></td><td><ul><li>2 kg - PLA/PETG Main filament color (GREY)</li><li>0.5 kg - PLA/PETG Secondary filament color (GREEN)</li><li>14 g - PLA/PETG Black filament for text (BLACK)</li><li>34 g - TPU flexible filament for your Gasket (BLACK)</li></ul><p>* Feel free to choose your own colors.</p></td></tr><tr><td colspan="2"><figure class="image image_resized" style="width: 98.07%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-04_77b29f1dbec36.jpg"></figure></td></tr></tbody></table></figure><p>I tried to keep the project in as few parts as possible and minimize the use of screws and glue. I&#39;ve also included three images that show all the parts and file names to help you easily know what to print and what to remove. <strong>Click on the pictures to enlarge.</strong></p><figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_5539d72c1e42.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_1698b67225759.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_34f66213cbfb2.jpg"></figure></td></tr></tbody></table></figure><p>&nbsp;</p><p>&nbsp;</p><h2>Printing settings</h2><p>Under each file name, I&#39;ve added a recommendation on how to print that component. Please note that these are just suggestions, and you can choose the filament type, infill percentage, and wall count according to your preferences.</p><p>Additionally, I&#39;ve attached an image below that illustrates how to orient each component on the print bed for optimal results <strong>(click to enlarge):</strong></p><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_c8a5b6a960393.jpg"></figure><p>Please note that you will find in also wonderful print profiles from the community too :)</p><h2> </h2><h2>Assembly instructions</h2><p>I think the best way to demonstrate the assembly is through a video. Therefore, I&#39;ve created a short animation video for you that illustrates the assembly process and the sequence of the project&#39;s components. Enjoy:</p><h3> </h3><figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_f7b5fb7649351.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_0604a5a98bf6d.png"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_4edcdff3d535e.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_f3764fb52c104.png"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_7b9abe53ec9f3.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_611a02308f5c5.png"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_d8d2275f63acd.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_f59c54b41a2bd.png"></figure></td></tr></tbody></table></figure><h3>Buttons assembly:</h3><p>Please print x2 Button insert.stl files and assemble as the photo below:</p><p><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-09-29_89172a00d321c.jpg"></p><p>&nbsp;</p><h2>Recommended Remix:</h2><ul><li><a target="_blank" href="https://makerworld.com/en/models/27690#profileId-24067" rel="nofollow noopener">Front Panels for P1P remix</a></li><li><a target="_blank" href="https://makerworld.com/en/models/28098#profileId-24385" rel="nofollow noopener">new Drawers with Clean look and version with Text</a></li><li><a target="_blank" href="https://makerworld.com/en/models/28948" rel="nofollow noopener">Spool Holder add on on the rear</a></li><li><a target="_blank" href="https://makerworld.com/en/models/29315" rel="nofollow noopener">Honeycomb panels for the sides</a></li></ul><h2>Links:</h2><ul><li><a target="_blank" href="https://s.click.aliexpress.com/e/_Dk1tOEL" rel="nofollow noopener">COB 5mm Dimmable LED strip</a> suitable to the project.<br>please make sure to choose: “white” and “Strip-USB Button” options.<br> </li></ul><h2>Colors ideas:</h2><figure class="image image_resized" style="width: 59.65%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_5f2218eae1ea7.jpg"></figure><h2>How to download CAD (f3d,Step) files:<br><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-03_16ad19d8f61ba.jpg"></h2><h2> </h2><h2>Selected User makes:</h2><figure class="table" style="width: 90.79%"><table class="ck-table-resized" style="border: 1px solid hsl(0, 0%, 100%)"><colgroup><col><col><col></colgroup><tbody><tr><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-04_3aaa07d5a3c1e.png"><figcaption>click to enlarge</figcaption></figure></td><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 86.34%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-03_f5f9b0b8d1086.jpg"><figcaption>click to enlarge</figcaption></figure></td><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-03_ee05726581f83.jpg"><figcaption>click to enlarge</figcaption></figure></td></tr><tr><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_8efeadcf004be.jpg"><figcaption>click to enlarge</figcaption></figure></td><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 79.61%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-04_c0866329e4121.jpg"><figcaption>click to enlarge</figcaption></figure></td><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 92.92%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_f106d497bd601.jpg"><figcaption>click to enlarge</figcaption></figure></td></tr><tr><td style="border: 1px solid hsl(0, 0%, 100%)" colspan="3"><figure class="image image_resized" style="width: 94.67%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_d8fbe88a9ea.jpg"><figcaption>click to enlarge</figcaption></figure></td></tr><tr><td style="border: 1px solid hsl(0, 0%, 100%)" colspan="3"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_0d0d9ff1ec084.jpg"><figcaption>click to enlarge</figcaption></figure></td></tr></tbody></table></figure><p>&nbsp;</p><figure class="table"><table><tbody><tr><td style="background-color: hsl(0, 0%, 60%)"><h2><span style="color: hsl(0,0%,100%)">Changelog</span></h2></td></tr><tr><td><ul><li>19/9/23 - published first prototype. not meant yet to print.</li><li>19/9/23 - uploaded v1.1 with angled glass holder and fixed Size drawer, stronger rear part.</li><li>23/09/23 - Left/Right/Rear Panel edges optimization for better surface finish.</li><li>24/9/23 - Huge update v1.2 !<ul><li>Extreme optimization to main parts, now it&#39;s 6 parts but much less support and faster to print.</li><li>Added wire channel for the LED&#39;s wires.</li><li>Added lock pins to TPU gasket.</li><li>new secure method to front and rear parts in addition to the dovetails.</li><li>Optimization to all decorative panels.</li><li>2 x Button frame cover with logo for P1P and P1S.</li><li>increased glass holder degrease to prevent movements.</li><li>Deeper AMS leg&#39;s socket, securing the AMS in it&#39;s place.</li><li>Added special drawer with accessories. it has a place for the H1.0-H2.0 HEX keys, 2 x Hotends, 5 cutters, 4 x wipers, screws, glue and needle.</li></ul></li><li>25/09/23 - updated new version 1.3 with measurements fix.</li><li>29/9/23 - added 2 remixes: clean front drawer, drawers with text, Dash front parts for P1P.</li><li>29/9/23 - added Button insert.stl + button images assembly.</li><li>30/9/23 - remix section update! spool holder, honeycomb panels added.</li><li>4/10/23 - New optimized slicing profile! faster, less filament, better support!</li><li>02/03/24 - added more support to side model.</li><li>04/04/24 - changed print profile for wider base.</li><li>22/05/24 - optimized structure for vibrations.</li><li>31/05/24 - changed Internal structure to be more rigid.</li><li>29/06/24 - added BOM items<br> </li></ul></td></tr></tbody></table></figure>