trottmann82

Makefy

It's planting season!<blockquote> TIP: Use a cotton pad in the bottom of each pot to keep the dirt from spilling into the bottom tray! &nbsp;</blockquote>&nbsp;This is a new version of a design I made and tested last season. Turned out to work great.The assembly consists of the following parts: Bottom Tray: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_52bc4f5b6a06.png"> This is the main part which holds water. It has guides for the pots and slots for the connecting beams. It should have enough solid bottom layers to avoid any infill. Just to make sure it's completly watertight.&nbsp;Connecting Beam: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_ab0b1e814f06f.png"> This is the part that supports the top plate. You will need 4 of these &nbsp;Pot: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_fb839ee86539c.png"> This is the pot itself. It consists of two parts that snap together. PLA seems to hold up pretty good for this part, but PETG or ABS might be a better choice. Top Plate: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_df2f64c41e23d.png"> This parts connects to the bottom tray with the four beams and holds the pots Greenhouse Dome: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_66dfe67204146.png"> This is a clear cover which provides a warm and humid environment for the seedlings. This part is provided in a separate print profile and should be printed in clear PETG or PC: — OPTIONAL --- Dirt Funnel: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_5f6384536a117.png"> The funnel makes it easier to fill the pots with dirt The Pestle: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_2ac2891fe5821.png"> Use this to gently pack the dirt.

Self Watering Seed Starter/Planter with Splittable Pots and Greenhouse Dome

Diverse

stijnzwan

After collecting all the expansions for this game and combining them with two base sets, I realized I needed a better way to organize and access all those tiles during gameplay. So, one lazy Sunday afternoon, I came up with this nifty tile tower that can hold about 240 tiles.&nbsp;I 3D-printed it using a 0.4mm nozzle and set the layer height to 0.2mm. Don't forget to enable supports if you decide to print it. I also used a brim, although probably not necessary.

Carcassonne tile tower

Spiele

dak0103

Mario

Figuren

JamesThePrinter

Slide a faceplate over the X1C's screen to add personality to your printer! 4 versions are available:<ul><li>Plain</li><li>Stripe</li><li>Hexagon</li><li>X1C Logo</li><li>More style available in <a target="_blank" href="https://makerworld.com/en/models/91850" rel="nofollow noopener">Volume 2</a></li></ul>***In addition, I have included a STEP file for customization&nbsp;Stripe, Hexagon and X1C Logo are all multi-color models. I have uploaded 3MF versions to make setup of the multi-color easier.&nbsp;&nbsp;Print SettingsSupports are required, but easily removed&nbsp;&nbsp;AssemblySlide the faceplate over the screen<img src="https://makerworld.bblmw.com/makerworld/draft/263686/2023-12-05_iyypd952vchl.png">&nbsp;&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/JamesThePrinter" rel="nofollow noopener">Buy Me A Coffee</a>&nbsp;The following filaments were used in the pictures above:Plain<ul><li>Bambu Lab Matte Marine Blue PLA</li></ul>Stripe<ul><li>Bambu Lab Matte Scarlet Red PLA</li><li>Bambu Lab Matte Lemon Yellow PLA</li></ul>Hexagon<ul><li>Bambu Lab Sparkle Crimson Red PLA</li><li>Bambu Lab Silk Gold PLA</li></ul>X1C Logo<ul><li>Bambu Lab Matte Ash Gray PLA</li><li>Bambu Lab Basic Bambu Green PLA</li></ul>

Bambu Lab X1C Faceplates

Bambu Zubehör 