triggerx21

Havoc_Eins

Recommend printing on fine settings, with ironing. All credits to the original STL owner, uploading here for one click convenience.

YoRHa Coaster (Nier Automata) by ChiralPrinting101

Nier

jcantillanor

L'Cie brand from Final Fantasy XIII

LCie Brand

Final Fantasy

LutraVulgaris

For the awesome <a target="_blank" href="https://makerworld.com/en/models/187047" rel="nofollow noopener">Frontier</a>  there needs to be an awesome display! Made it with some internal lighting spotlights in de front and a LED-neon strip in the slate.note: this is a big print! for the mountains I used about 800 grams of <a target="_blank" href="https://www.kexcelled3d.com/products/pla-k5m/" rel="nofollow noopener">kexcelled Malt Clay </a>also a good choice is something like <a target="_blank" href="https://www.amazon.com/OVERTURE-Filament-Dimensional-Accuracy-Sedimentary/dp/B0BTST5WZV?th=1" rel="nofollow noopener">this</a>for the big starfield sign I used Sunlu PLA matte black, this is also a big print with about 600 grams depending on infill and wall/top/bottom. I changed the filament on the starfield letters to Sunlu PLA matte white.it will fit snug into the display housing cutout, there is a wire channel all the way through. for the DC connector I used <a target="_blank" href="https://nl.aliexpress.com/item/4000339877320.html?spm=a2g0o.productlist.main.11.66c92efcICJ927&algo_pvid=21295b5f-ba8e-452f-9ca6-8e132706f2c0&algo_exp_id=21295b5f-ba8e-452f-9ca6-8e132706f2c0-5&pdp_npi=4%40dis%21EUR%211.06%210.95%21%21%211.08%21%21%40211b88ee16963607894767829e366c%2110000001394160335%21sea%21NL%210%21AB&curPageLogUid=aQzCknrP9i8g" rel="nofollow noopener">this</a>for the ledstrip i used <a target="_blank" href="https://nl.aliexpress.com/item/1005005835682050.html?spm=a2g0o.order_list.order_list_main.33.3d2279d2pIUrFh&gatewayAdapt=glo2nld" rel="nofollow noopener">this</a>&nbsp;&nbsp;

Starfield frontier LED display

Starfield 

MalcTheOracle

<h3>Introduction</h3>Have you ever had a beverage and need more Fallout in your life?<h3>Solution</h3>The Enclave Flag Fallout Coaster. The <a target="_blank" href="https://makerworld.com/en/models/498501" rel="nofollow noopener">USA Flag Fallout Coaster</a> is also available. One is shaped like a bottle cap and one is traditional.&nbsp;Print one, print many. Your day will be all the better for it.<h3>Coaster Trays</h3>These are compatible with my <a target="_blank" href="https://makerworld.com/en/@MalcTheOracle/collections/887939" rel="nofollow noopener">Coaster Tray Collection</a>.<ul><li><a target="_blank" href="https://makerworld.com/en/models/226747" rel="nofollow noopener">Four-sided version</a></li><li><a target="_blank" href="https://makerworld.com/en/models/383088" rel="nofollow noopener">Three-sided version</a></li></ul><h3>Also Available</h3>Many other models which are all based on Fallout.<ul><li><a target="_blank" href="https://makerworld.com/en/@MalcTheOracle/collections/1503820" rel="nofollow noopener">Fallout Collection</a></li></ul>

Enclave Flag Coaster - Fallout

Fallout

mystoopidstuff

This is the updated V3.3 Version of the 16 BIN (4x4) 6U Gridfinity Box for Stuff.  &nbsp;All models included here were designed to fit on an Ender3 size bed (the footprint is 196x214mm).&nbsp;See the <a target="_blank" href="https://makerworld.com/en/models/159840#profileId-266789" rel="nofollow noopener">20 bin model</a> for printing and assembly suggestions, since this version is the same, just smaller.  I have a <a target="_blank" href="https://www.mystoopidstuff.com/bambu-spares-box-build-guide.html" rel="nofollow noopener">build guide on my blog </a>with some tips on assembly.  The instructions are for a case with more features, but it shows how to assemble the latches and hinges. It requires the following hardware:&nbsp;(2) M3 x 12mm SHCS  (these hold the latch “cleats” to the top of the case) (4) M3 x 20mm SHCS  (4) M3 x 25mm SHCS  or (2) M3 x 50mm SHCS (2) M3 x 30mm SHCS (100) 6x2mm Cylinder Magnets - OPTIONAL (I used 6x3mm, which seem to work OK too) (SHCS = Socket Head Cap Screws)&nbsp;The only files that are different from the original design, are the parts for the top and bottom (base) of the case.  All latch, label, and handle parts are carried over unchanged from the original (but are included here for convenience).PETG is recommended for the latches.  A 3MF 7 plate profile  (including 3 alternate plates) with modifiers is included.  It uses the following settings:<ul><li>PLA for all parts except the latches, which are set up to use PETG, and the TPU gasket</li><li>0.4mm X1 Carbon profile</li><li>3 Walls</li><li>Arachne wall generator </li><li>12% gyroid infill (base, modifiers are included which range from 15-25%)</li><li>No Supports</li><li>Brim on several parts including the tops and bottoms of the case.  There is no Brim on the MMU version of the top.</li><li>Several optional multicolor parts.</li><li>I used a textured PEI plate for all models except for the TPU gasket, which can be printed using an Engineering plate and glue stick (as a release agent)</li></ul>AMS is not required, but here is how it is set up in the profile: 1 = PLA- Gray 2 = PLA - Blue 3 = PLA - Orange 4 = PLA - White 5 = TPU - White (this is the non-AMS spool on the back) 6 =  PETG - Blue (used for the latches only) <figure class="image image_resized" style="width:52.61%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000386034/design/2024-03-21_3cpgtlalbqxb.jpg"></figure>&nbsp;If printing the gasket version of the base, I recommend that you test that your printer can run TPU without issues first.  The cap of a sharpie is the tool I use to press the TPU gasket into place.  The gasket is not symmetrical so make sure to verify the position before installing it  Start by pressing in the middle of the gasket along all 4 sides, then once it&#39;s set in position, press in the corners.  &nbsp;There are also two versions of the top, one is designed for an MMU/AMS and features the &#34;<a target="_blank" href="https://github.com/gridfinity-unofficial/logo" rel="nofollow noopener">Unofficial Gridfinity Logo</a>&#34; (or at least the best copy of it I could make of it, since the .svg&#39;s did not load correctly from github).  The other version is, you guessed it, plain with no logo, for single color printers. &nbsp;Finally, there are three versions of the labels for the front of the case.  The first is designed to be used with 12mm Brother P-Touch (or similar) labels.  The second is a multi-color label using the “<a target="_blank" href="https://github.com/gridfinity-unofficial/logo" rel="nofollow noopener">Unofficial Gridfinity Logo</a>”.   And finally, there is a plain label included, in case you want to use the slicer tools to add embossed text to it.&nbsp;Update 5/4/2024: I was notified in the comments of a problem with the model (there was a hole that was partly filled in the base). I attempted to fix this yesterday by uploading a repaired 3MF profile, and thought things were good, however when I checked the models here, I found the issue was still present in the 3D preview, and the 3MF was still the old version (2M).  I&#39;m not sure what occurred, but it was probably user error, since the raw STL files were updated here yesterday, but not the 3MF.  I was also updating the model at Printables at the time, and the files were OK over there.  I&#39;ve re-uploaded the 3MF profile today with the correct version (2R), and verified the download and 3D preview show the correct version and the fix - so it should be good now.  The updated profile is named “GRIDFINITY-16BIN-6U_BFS-V3-3-Bambu-v2R.3mf”.  Thanks to <a target="_blank" href="https://makerworld.com/en/@user_2916867828" rel="nofollow noopener">user_2916867828</a> for letting me know about the problem.&nbsp;&nbsp;Other stuff:If you need some bins for small parts, the following bins with covers are a good option to use with the Box For Stuff <a target="_blank" href="https://www.printables.com/model/710154-gridfinity-box-for-stuff-bfs-20-bin-version-20" rel="nofollow noopener">20 bin </a>and <a target="_blank" href="https://www.printables.com/model/719788-gridfinity-25-bin-box-for-stuff-version-20-unteste" rel="nofollow noopener">25 bin </a>cases (or other 6U tall cases):<ol><li><a target="_blank" href="https://makerworld.com/en/models/237116#profileId-253187" rel="nofollow noopener">1 compartment 2x1 (6U) bin with a magnet pickup tool</a></li><li><a target="_blank" href="https://makerworld.com/en/models/416342" rel="nofollow noopener">1x1, 1x2 (3 Compartment) and 1x4 (6Compartment) bins with lids (6U) - version 2.1</a></li><li><a target="_blank" href="https://makerworld.com/en/models/405008" rel="nofollow noopener">1x2, 1x3, 1x4 (6U and 12U) Lidded Bin for Stuff with Latch Version 2.0</a></li><li><a target="_blank" href="https://makerworld.com/en/models/405004" rel="nofollow noopener">2x2, 2x3, 2x4 (6U and 12U) Lidded Bin for Stuff with Latch Version 2.0</a></li><li><a target="_blank" href="https://makerworld.com/en/models/405013" rel="nofollow noopener">3x3, 3x4 (6U and 12U) Lidded Bin for Stuff with Latch Version 2.0</a></li></ol>If you want to check out my other Gridfinity cases, you can find them at the links below:<ol><li>Gridfinity Box For Stuff <a target="_blank" href="https://makerworld.com/en/models/159840#profileId-266789" rel="nofollow noopener">20 bin (6U)</a></li><li>Gridfinity Box For Stuff <a target="_blank" href="https://www.printables.com/model/719788-gridfinity-25-bin-box-for-stuff-version-20-unteste" rel="nofollow noopener">25 bin (6U)</a> (max size for a Bambu X1C/P1S)</li><li>Gridfinity Box For Stuff <a target="_blank" href="https://makerworld.com/en/models/386034#profileId-286398" rel="nofollow noopener">16 bin (6U)</a> (Ender 3 size)</li><li>Gridfinity Box For Stuff <a target="_blank" href="https://makerworld.com/en/models/386041#profileId-286401" rel="nofollow noopener">16 bin - 12U deep version</a> (Ender 3 size)</li><li>Gridfinity Box For Stuff <a target="_blank" href="https://makerworld.com/en/models/389651" rel="nofollow noopener">2 bin (6U)</a> (small test version)</li></ol>Additionally, there are some <a target="_blank" href="https://makerworld.com/en/models/388742" rel="nofollow noopener">alternate latch parts</a>, which may help if you do not have the M3x30mm screws or have difficulty installing the latch “cleat”.&nbsp;If you want to store some metric hardware in this, <a target="_blank" href="https://www.printables.com/@Ch3vr0n_247401" rel="nofollow noopener">Ch3vr0n</a> posted some segmented bins for the Gridfinity system here:<a target="_blank" href="https://www.printables.com/model/732655-gridfinity-boxes-for-gridfinity-box-for-stuff-20-b" rel="nofollow noopener">https://www.printables.com/model/732655-gridfinity-boxes-for-gridfinity-box-for-stuff-20-b</a> If you find these models useful, please post a like or a comment with some pics of your prints. You can find the other things I&#39;m working on at my blog <a target="_blank" href="https://www.mystoopidstuff.com/blog" rel="nofollow noopener">here</a>.  You can also follow me here or on Printables, to see what new stuff I post.  If you would like to support my work, you can Buy Me A Coffee using this link:&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/mystoopidstuff" rel="nofollow noopener">https://www.buymeacoffee.com/mystoopidstuff</a>Thanks for looking!

4x4 16 Bin 6U Gridfinity Box For Stuff  Ver 3.3

Gridfinity 

brianyang315

default setting for a1 mini works fine

frieren monster chest 葬送的芙莉蓮 寶箱怪

Figures

Herol

The General Atomics MQ-9 Reaper is a long-endurance, medium-altitude, multi-role unmanned aerial vehicle. It is primarily intended for the destruction of mobile ground targets, but thanks to the entire spectrum of modern sensors and communication tools, it is also used for reconnaissance.This kit card could be great small gift for military fans or for kids.

MQ-9 Reaper Drone Kit Card

model kit

Neebick

Master Sword pen that is designed to use Pilot G2 ink refills (Gold and silver inks are available for extra fun). I designed the hilt for multiple color printing but looks very nice in all silver as well.<h3>Printing</h3>The model prints great with a 0.4mm nozzle. All pictures are printed with it at 0.08mm layer height. A 0.2mm nozzle will look better with finer details like the Triforce on the blade but is optional.&nbsp;Print at lower layer heights for better detail and smoother feel while handling.&nbsp;Supports are necessary for the hilt at the section that the blade inserts into. Supports also helps with the blade top since it is very narrow on the plate and could jostle loose. The screw must be printed vertically for best detail and function.&nbsp;I printed the blade in Bambu Labs Basic PLA Silver. This filament gave a very smooth and satisfying to touch finish without paint. I had to print on separate plates to achieve it since unsightly bulges appeared when the nozzle moved between parts to often. This is most likely due to the tall and skinny profile of the parts.<h3>Assembly</h3>The hilt prints in two halves for better detail and less filament waste on purges. Remove supports and glue halves together. Alignment is important for appearance and part fitment.<figure class="image image_resized" style="width:32.89%;"><img src="https://makerworld.bblmw.com/makerworld/draft/549416/2024-02-01_8fcaf10bf4d81.png"></figure>&nbsp;The blade top inserts into the hilt. Friction fitting will hold but glue can be used for a more permanent assembly.<figure class="image image_resized" style="width:30%;"><img src="https://makerworld.bblmw.com/makerworld/draft/549416/2024-02-01_43c74889e437e8.png"></figure>&nbsp;Slide Pilot G2 refill cartridge into blade body. It will not go all the way in. The fitment is purposely tight for better feel while using as a pen.<figure class="image image_resized" style="width:30%;"><img src="https://makerworld.bblmw.com/makerworld/draft/549416/2024-02-01_944e3f5ee510a8.png"></figure>&nbsp;Slowly screw in the blade top into the blade body. You will feel a slight resistance as the screw pushing against the ink cartridge. Continue till the parts align flush. DO NOT over tighten to avoid damage to the threads. There is a slight over tightening allowance but you will not be able to get an additional turn without damaging the parts.<figure class="image image_resized" style="width:31.67%;"><img src="https://makerworld.bblmw.com/makerworld/draft/549416/2024-02-01_80381d0adb3148.png"></figure>&nbsp;To remove the ink cartridge, unscrew the top and press the tip against a piece paper. There should be a slight pop as the the pen tip aligns with the blade tip. The cartridge should just shake out now.

Master Sword Pen

Zelda

LemonArts

1967 Shelby Mustang GT 500 Model Kit a model of the legendary Car Easy to Print. Multicolor use glue to assemble <figure class="image image_resized" style="width: 73.8%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000497166/design/2024-06-15_e980d4cba3d34.jpg"></figure><figure class="image image_resized" style="width: 74.28%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000497166/design/2024-06-15_e3fc65b6eabf1.jpg"></figure><figure class="image image_resized" style="width: 74.24%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000497166/design/2024-06-15_16f9c61e69231.jpg"></figure>

1967 Shelby Mustang GT 500

cars

cyanidesugar

Can it do the Kessel Run in 12 parsecs? Who knows?! &nbsp;This is a fairly simple print-in-place Hueforge Hybrid print-in-place piece that combines filament painting methods and traditional 3D printing methods in one singular print. It utilises 4 filament colours, 3 for the Hueforge print, and one for the Millennium Falcon. &nbsp;If you are using the one-click 3MF file on Makerworld, all appropriate settings have been applied to the print. If you are not using the one-click printing method, or are NOT using a Bambu printer, see the print instructions below: &nbsp;Print Instructions: <ol><li>Print the hueforge print (0mm - 2.08mm) at 100% infill.</li><li>The Millennium Falcon portion of the print (2.08mm - 80mm) should be printed at 10% infill, with 3 wall loops, 3 top and bottom surfaces. I used a layer height of 0.16mm.</li><li>You can achieve this by using a layer height modifier in your slicer to modify layers 2.08mm-80mm.</li><li>You do not need any supports for this print. </li><li>I used Burnt Titanium as the background for the print, but you can use any variation of a dark or black colour.</li><li>I used Polymaker's Starlight Mercury for the Millennium Falcon, but you can use any gray or silver variant, or whatever you like!</li></ol>Filament Swaps: &nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm&nbsp;Filaments Used: - PLA Flashforge Burnt Titanium Transmission Distance: 2.5 - (You can use black!) - PLA META Sunlu Teal Transmission Distance: 5.4 - PLA Kingroon White Transmission Distance: 8- PLA Polymaker Starlight Mercury (This is for the Millennium Falcon!)&nbsp;Swap Instructions: - Start with Burnt Titanium - At layer #7 (0.68mm) swap to Teal - At layer #11 (1mm) swap to White- At layer #23 (1.96) swap to Starlight Mercury (this is the Falcon!)&nbsp;The wonderful Millennium Falcon model was sourced from <a target="_blank" href="https://www.printables.com/model/212461-fillenium-malcon-improved" rel="nofollow noopener">here</a> by <a target="_blank" href="https://www.printables.com/@Gareth42_280557" rel="nofollow noopener">Gareth42</a>. If you haven't yet, you should definitely print the standalone model, because it it marvellous! &nbsp;Have fun, and let me know how you go with the print! &nbsp;____________________________________ Commercial License to Sell PrintsIf you want to sell any physical models I have uploaded anywhere, an unrestricted commercial license is available on the $10AUD tier of my <a target="_blank" href="https://patreon.com/cyanidesugar3DP?utm_medium=clipboard_copy&utm_source=copyLink&utm_campaign=creatorshare_creator&utm_content=join_link" rel="nofollow noopener">Patreon</a>! ____________________________________&nbsp;

Piece of Junk in Space - Hueforge Hybrid Print

Star Wars

Stephen

Practical 3D printed shopping trolley token featuring the iconic White Mage class emblem from Final Fantasy XIV. Designed for compatibility with UK shopping trolleys, it comes in two versions:<ol><li>Dual-color version: Adds a touch of elegance with its harmonious blend of colors.</li><li>Extruded version (single color): Sleek and simple, emphasizing functionality without sacrificing style.</li></ol>Tested and proven compatible with UK shopping trolleys

FFXIV White Mage UK Trolley Token

FInal Fantasy 14

Rimpelstullchen

"Anime Girl and Cat" If you like to scale, do it only with x and y axis, do not change z axis! Print at 100% infill with a layer height of 0.08mm and a base layer of 0.16mm Wallgenerator is set to “Arachne” for better results, if your CPU is slow, change it to "Classic" For better results you can use a 0.2mm noozle, just leave all other settings as they are. Filaments Used: PETG BambuLab Basic Black Transmission Distance: 0.3 PETG BambuLab Basic Red Transmission Distance: 2.5 PETG BambuLab Basic Yellow Transmission Distance: 6 PETG BambuLab Basic Nature Transmission Distance: 8&nbsp;Swap Instructions: if you don't have ams just put pause on specified layers and swap filament manually Start with Black At layer #8 (0.72mm) swap to Red At layer #13 (1.12mm) swap to Yellow At layer #19 (1.6mm) swap to Nature for the rest&nbsp;If you wanna use PLA: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Tough Vermillion Red Transmission Distance: 3.0 PLA BambuLab Basic Yellow Transmission Distance: 6.0 PLA BambuLab Basic Beige Transmission Distance: 8.0 Just leave all other settings as they are. I wish you always a clean nozzle

Anime Girl and Cat - Hueforge 160x115x22 4x colors

Hue Forge

DKdevt

A small foldable and stackable container, designed to be printed in a single piece, is a compact and versatile solution for efficient storage of small items. Perfect for Silica gel!<ul><li>It can be printed in materials such as PLA, ABS, or other technical materials.</li><li>It is printed in a single piece that is easily foldable for assembly.</li><li>Thanks to its robust and stable design, several boxes can be stacked on top of each other without risk.</li><li>It is compatible with multi-color printing profiles.</li></ul>Box Size: 100 x 70 x 55mm&nbsp;Check the trending design Foldable Box: https://makerworld.com/en/models/407781#profileId-309744

Foldable Container Box! Print-In-Place

Practical 

ildarcheg

Box: AMMO BOX 9mm AMMUNITION STORAGE 50 ROUNDS AMMO CRATE 9 mmDimensions: 6” x 3” x 1 1/2”Includes: - base (lower) - lid (upper) - lid punisher edition multicolor (upper) - lid punisher edition single color (upper) - insert - front plate multicolor - front plate single colorMaterials PLA, PETG, ABS, CFMulticolor Vs Single Color If you have a single-color printer like Ender 3 use MONO version (lid and front plate). If you have a multicolor printer like Bambu with AMS use the non-mono version (lid and front plate) and paint in Slicer.&nbsp;<h2>100+ CALIBERS AVAILABLE ON CULTS3D 2 DESIGNS</h2><h2><a target="_blank" href="https://cults3d.com/en/design-collections/ildarcheg/bbox" rel="nofollow noopener">BBOX</a></h2><figure class="image"><a href="https://cults3d.com/en/design-collections/ildarcheg/bbox" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/812695/2024-04-04_2cc9e9200b0068.png"></a></figure>&nbsp;<h2><a target="_blank" href="https://cults3d.com/en/design-collections/ildarcheg/abox" rel="nofollow noopener">ABOX</a></h2><figure class="image"><a href="https://cults3d.com/en/design-collections/ildarcheg/abox" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/812695/2024-04-04_49d3cd51ef544.png"></a></figure>   Following calibers are also available: 9mm 9 mm 40 S&amp;W 40s&amp;w 40sw 45 AUTO 45 ACP 45auto 45acp 6.5 Creedmoor 6.5 CM 243 WIN 243win 5.56 556 NATO 270 WIN 270win 308 WIN 308win 300 BLK 300blk Blackout 8x51R 8x51mm R Lebel 41 REM MAG 41 Mag 6mm ARC 6mm 6.8 REM SPC 6.8spc 224 Valkyrie 224 22-250 REM 22-250rem 450 Bushmaster 450 30-06 SPRG 30-06 Springfield 38 SPECIAL 38 S&amp;W Special 357 MAGNUM 357mag 10mm 10 mm 223 REM 223rem 7.62x51mm NATO 7.62x51 30 Carbine 7.62x33mm FN 5.7x28mm 5.7x28 7.62x39mm 7.62x39 22 LR 22 LR Long Rifle 350 Legend 9x43mm 17 HMR 17hmr 22 WMR 22wmr 44 REM MAG 44 Mag 45 Colt 45colt 6.5 PRC 6.5prc 6mm Creedmoor 6mm 300 WIN MAG 300 win 28 Nosler 28nosler 7MM REM MAG 7mm 6.8 Western 6.8western 380 ACP 380 auto 300 WSM 300wsm 8x57 mm Mauser 8x57mm 8x60 mm 8x60mm 7.5x55mm Swiss 7.5x55 6.5x55mm Swedish 6.5x55 357 SIG 357sig 30-30 WIN 30-30win 9x18 Makarov 9x18mm 7x57mm Mauser 7x57 32 ACP 32 auto 50 AE 50 Action Express Desert Eagle 32 S&amp;W LONG 32 WadCutter 375 H&amp;H Magnum 375 Holland &amp; Holland 9.3x62 mm Mauser 9.3x62mm 300 PRC 300prc 7mm RSAUM 7mm Rem SAUM 500 S&amp;W Magnum  500sw 7.62x54R 7.62x54R Mosin 45-70 GOVT 45-70govt 300 RUM 300RUM 260 REM 260rem 22-243 22-243 Middlestead 44-40 44-40 WCF Winchester 280 REM 280 Remington 458 SOCOM 458socom 303 BRITISH 303british 25-06 REM 25-05rem 280 ACKLEY 280 AI 338 LAPUA 338lapua 338 WIN MAG 338winmag 220 SWIFT 220swift 32 French 7.65×20mm Long 7mm-08 Remington 7mm08 9.3x74R 9.3x74mm 7x64mm 7x64 mm 300 Savage 300savage 444 Marlin 444marlin 35 Whelen 35whelen 460 S&amp;W Magnum 460SW 454 Casull 454casull 6.5 Grendel 65grendel 270 WSM 270wsm 8x68S 8x68 S 26 Nosler 26nosler 300 WBY MAG 300 Weatherby Magnum 256 WIN 256 Winchester Magnum 7mm PRC 7mm PRC 25 ACP 25ACP 222 REM 222rem 300 NORMA MAG 300 NORMA MAGNUM 6mm Dasher 6mm 410 ga 410 ga 22 Hornet 22 hornet 38-55 Win 38-55 WCF 7x33 Sako 7x33 6mm XC 6mmXC 375 Ruger 375Ruger 7mm BR Rem 7mm Benchrest Remington 22 Savage 22savage 250 Savage 250Savage 7mm WSM 7mm 30-40 Krag 30 US Army 50 Beowulf Beowulf 7.62x25 Tokarev 7.62×25mm Tokarev Custom Lids Feel free to reach me if you are interested in custom lids--------- ammo box, ammo crate, ammo storage, ammunition box, ammunition storage, ammunition crate, 3d print, stl, 3d model, 9mm, 9 mm

AMMO BOX 9MM AMMUNITION STORAGE

Firearms Practical

OlleMark

Updates:2023-10-27 - Redesigned the nozzle cleaner slots so you can flip the box without them jumping around.&nbsp;A smaller sized accessory box aimed to fit most of the accessories that the bambu printers are shipped with.&nbsp;Larger version here: <a target="_blank" href="https://makerworld.com/en/models/52449#profileId-54209" rel="nofollow noopener">https://makerworld.com/en/models/52449#profileId-54209</a>&nbsp;The lid is a slide on design because i wanted something that can stand open without taking up too much space but still be able to close and be put away. The lid can slide on the underside of the box to get it out of the way fully which makes the box take up way less space compared to a normal box.&nbsp;The lid has the bambu logo engraved for painting, it is invisible until you start painting. A untested painted version will be available to print for the ams users.&nbsp;I printed mine with white clas ohlson pla.&nbsp;It fits:2 hotendsbambu printing adhesive 4 nozzle wipersboth allen keysmost of the miscellaneous bags of screws and lube

Compact Accessory Box for P1 and X1 Series

printer tools

Ocular Dynamic

Stabby cat door frame topper to remind guests the cat is not to be trusted…..or use it for Halloween decoration, both are equally valid. Profile is setup for A1 Mini build plate and is 3mm thick, but easily scalable to make whatever size you want.&nbsp;Check out the <a target="_blank" href="https://makerworld.com/en/models/520842#profileId-437301" rel="nofollow noopener">Gun Cat Topper</a> if you need a strapped cat….<a target="_blank" href="https://makerworld.com/en/models/520842#profileId-437301" rel="nofollow noopener"><img style="width: 33.24%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000488039/design/2024-07-01_757168fda3944.jpg">&#34;</a>

Knife Cat Door Topper

cats

k2thestank

&nbsp;Designed to help shuffle your favorite cards easier and faster then by hand. Pick a color and we&#39;ll do the rest! Print in a PLA material or if you prefer PETG! Size: - Standard - 100 single sleeved Notes: - we&#39;ve tested it with a few brands and some will have the occasional feeding issue which can be quickly fixed with a 1/4 reverse turn or a manual approach if one jam does occur! Coloring Customizations: (based of preview pictures) Primary - Red Secondary - Orange Materials: - PLA for the main body parts - Steel M3 hardware     - x13 10mm M3&#39;s,       - x14 M3 nuts,       - x4 6mm M3&#39;s (plastic tapping like the one BL uses) - 7x55mm Tactical Elastics (link in BOM) - 6x3mm Magnets - TPU rubber wheels&nbsp;Demo:<ul><li>https://x.com/Ktothestank/status/1800550435406905452</li></ul>Installation and Build:<ul><li>Assemble the base and interior walls and slide them into the back wall and use the M3x12mm screws to secure them in place</li><li>Insert the M3 Nuts into the Card Walls and use the M3x12mm into the Nuts</li></ul><img class="image_resized" style="width: 43.96%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000491053/design/2024-06-24_7fbc1cfa29d5b.jpg"><ul><li>Slide on the TPU pieces and ensure the Arrow section of the larger one points toward the card wall as shown</li><li>Attach the Drive wheels to the back wall and place the smaller gears /w screws into them to secure</li><li>Loop over the 4 elastics (2 on each Side)</li></ul><img class="image_resized" style="width: 44.19%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000491053/design/2024-06-24_a38e2b779473c.jpg">&nbsp;<ul><li>Place magnets into front (they&#39;ll be fairly stiff) add the front plates onto the ones installed then press them into the front cover (watch polarity)</li><li>Attach the front to the already constructed pieces and align all the parts to their designated holes</li></ul><figure class="image image_resized image-style-side" style="width: 43.77%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000491053/design/2024-06-24_ec15650f7daf3.jpg"></figure><img class="image_resized" style="width: 43.79%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000491053/design/2024-06-24_9ecece1c4925b.jpg">&nbsp;<ul><li>Slide in card shelfs and attach them as seen (this is the 2x12mm rod version but you can make your own or purchase, we used filament just for the photos) </li><li>after its secure add the M3x12 screws through to help secure it (you dont need nuts its just to ensure they dont slip out)</li></ul><img class="image_resized" style="width: 43.67%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000491053/design/2024-06-24_38bc8de5c57ec.jpg">&nbsp;<ul><li>Insert nut into the handle pieces</li><li>you can install the handle in either option</li></ul><img class="image_resized" style="width: 43.38%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000491053/design/2024-06-24_f28c801dcd8fe.jpg"><img class="image_resized" style="width: 26.05%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000491053/design/2024-06-24_36d0a2545ccaf.jpg"><img class="image_resized" style="width: 25.71%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000491053/design/2024-06-24_eeda004be238b.jpg">&nbsp;<ul><li>Install the front cover and your set!</li></ul><img class="image_resized" style="width: 43.33%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000491053/design/2024-06-24_be0526e62ba9f.jpg">&nbsp;some snagging might occur and manual adjustments may be required but shouldn&#39;t be to much, the major snag is the back of the card catcher to the back wall which happens occasionally especially if the sleeves have mild warping to them.