trentrsa

Tridealo.Impresiones

<figure class="image image_resized image-style-align-right" style="width:60.56%;"><img src="https://makerworld.bblmw.com/makerworld/draft/786699/2024-03-30_z0sm5dph317i.jpg"></figure><h3>Wire Cutter Holder for the HSW</h3>&nbsp;Compact holder that can be printed without support.Easy to Snap to your Honeycomb Storage Wall.3 Different variations.&nbsp;<figure class="image image_resized image-style-align-right" style="width:35.56%;"><img src="https://makerworld.bblmw.com/makerworld/draft/786699/2024-03-30_wadkgtjif2g5.png"></figure><h4> </h4><h4> </h4><h4>Cutter Dimension</h4>This holder is designed based on the generic wire cutters with the following dimensions.<ul><li>T Thickness must be less than 13.5 mm.</li><li>W The cutter must have a minimum of 37 mm when it is in compression.</li><li>H Approximately 130mm height.</li></ul>&nbsp;&nbsp;<figure class="image image_resized image-style-side" style="width:35.78%;"><img src="https://makerworld.bblmw.com/makerworld/draft/786699/2024-03-30_0b284n53w8ia.png"></figure><h4>Print orientation:</h4>Print flat as the image shows. No needs support.<h4>Print Settings:</h4><ul><li>Material: PLA/PETG</li><li>Layer height: 0.2</li><li>Perimeters: 4</li><li>Infill density: 25%</li></ul>&nbsp;Happy Printing!!!&nbsp;&nbsp;&nbsp;

HSW Cutter Holder

Masks

printchallenge

This is a model of a character from the horror movie “hellraiser”, called pinhead.But instead of pins, you can use toothpicks :D ! The holes are 2.5mm in diameter, so use toothpicks of ±2mm in diameter.&nbsp;How to put it together is really simple:Pinhead Toothpick Bust #3dprinting <a target="_blank" href="https://youtube.com/shorts/B5lASq4HJKc?feature=share" rel="nofollow noopener">https://youtube.com/shorts/B5lASq4HJKc?feature=share</a> &nbsp;edit 31/10/23: corrected some holes that were missing due to blender mirror mistakes…edit 05/11/23: added the cape and eyes to the 3mf file (on a different plate)&nbsp;hope you enjoy!&nbsp;Print Challenge

Hellraiser Toothpick Bust

Fun Prints

PenolopyBulnick

This is another pair of earrings designed with tri-colored filament in mind. I took a simple upside down diamond shape I had used previously with a simple infill earring design and used that as my base. I cut out the edges to make the edges slanted which is what would really show off the different colors of the filament. &nbsp;The solid version is meant to be printed to show off different infill patterns and not actually be printed solid.<h3>Printing Directions: </h3>For the outline earrings, I recommend doing Concentric infill for the top and bottom layers, but other than that, you can slice and print normally. &nbsp;For the solid infill version: <ul><li>no solid top layers</li><li>no solid bottom layers</li><li>4 Perimeters</li><li>Line Infill (I really like this one but you can change it up)</li></ul>

Subtle Faceted Diamond Earrings

earring 

Leo.w8

Quick, easy, helpfull!&nbsp;Combo includes the single washer's on one plateM2 WasherM2.5 WasherM3 WasherM4 WasherM5 WasherM6 Washer&nbsp;For more Bolts, Nuts, Washers and other great models feel free to check out my profile! (or click the collection down below)&nbsp;<a target="_blank" href="https://makerworld.com/de/u/1028186200/collections/58139" rel="nofollow noopener">SCREW IT</a>&nbsp;&nbsp;&nbsp;

Washer (M2, 2.5, 3, 4, 5, 6)

house hold

PrintThatBoii

This is a scalable Christmas tree with shoes because everything is better with some shoes and a face XD. The first tree is at scale 75% the middle is at 100% and the right one is at 50%. You can go bigger if you want. note that the smaller you go the harder it is to get the shoes in. At the scale of 50% you have to push a bit harder than the one on 100%. 3D PRINTING:You can print this with a layer height of 0.2 (for the 50% tree and the shoes) or 0.3mm. You don’t need supports. I would recommend dropping the shoes 1mm lower in the slicer as the shoes are a bit too round in the front. I printed them with 15-20% infill (trees and shoes). If you read this in December, Happy Christmas! &nbsp;I borrowed the shoes from @FatherLicorice and his cute little ghosts. &nbsp;

HSW

Masks

Fun Prints

earring

house hold

Xmas