HG_Design

GoPro boxPrepared for 2 batteries, for the machine and 6 cards.Fits GoPro 9/ 10 / 11 / 12Hope you like it

GoPro box

Device

Mc2.project3D

<h2>ARK MK1 REACTOR by Tony StarkThis is the Iron Man heart for LED Lamp kit-001.</h2>Simple to print, no supports. (to be printed at 0.2mm layers and in Pla material)<h3>--V2 REVIEW COMPLETED--for further information see attachment--</h3>EXLOSED FUSION 360:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-06-02_d0ad36003ab58.png"></figure>LINK assembly: (follow the Gifs at the bottom of the page)https://www.instagram.com/reel/C7HQLcwtCva/?igsh=aWJxbnk3aHpocnJ4&nbsp;COLORS USED:-Black-White-Silver (grey)-Gold-Copper-Transparent&nbsp;Different colors can also be used.&nbsp;<figure class="image image_resized" style="width: 65.11%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-06-02_dfbd2dcda0747.jpg"></figure>&nbsp;COLORAND QUANTITYComponents to print with Black color:-BASE-ASTA CORTA (x 10 pezzi)-ASTA LUNGA (x 10 pezzi)-ANELLO ASTE-CLIP (20 pezzi)-ANELLO BUCATO-CORONA SUPERIORE-PONTE ANELLO SUP&nbsp;Components to print with White color:-ANELLO CENTRALE-PIASTRA DISCHI-SCALE ANELLI (x 3 pezzi)&nbsp;Components to print with Grey color:-ANELLO SUPERIORE-VITE (x 3 pezzi)&nbsp;Components to print with Copper color or Gold color:-ANELLETTO 1-ANELLETTO 2-ANELLETTO 3-ANELLETTO 4-BOBINA (x 10 pezzi) Components to print with Transparent or White color:-CORDONE (x 10 pezzi)&nbsp;ASSEMBLY STEP TO STEP:STEP 1-BASE-ASTA CORTA (x 10 pezzi)-ASTA LUNGA (x 10 pezzi)<figure class="image image_resized" style="width: 55.79%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-05-18_9ac29e20e0b1e.gif"></figure>&nbsp;STEP 2-LED LAMP KIT-001<figure class="image image_resized" style="width: 55.42%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-05-18_c2adad2b7a86c.gif"></figure>&nbsp;STEP 3-ANELLO CENTRALE-PIASTRA DISCHI-SCALE ANELLI (x 3 pezzi)-ANELLO BUCATO<figure class="image image_resized" style="width: 54.49%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-05-18_098ff17d18285.gif"></figure>&nbsp;STEP 4-ANELLETTO 1-ANELLETTO 2-ANELLETTO 3-ANELLETTO 4<figure class="image image_resized" style="width: 55.05%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-05-18_3c5e3c122d75a.gif"></figure> STEP 5-ASSIEMAGGIO STEP 1 E STEP 4-ANELLO ASTE<figure class="image image_resized" style="width: 54.31%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-05-18_d530ed8b5197a.gif"></figure>&nbsp;STEP 6-CLIP (20 pezzi)-CORDONE (10 pezzi)-BOBINA (x 10 pezzi)<figure class="image image_resized" style="width: 53.42%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-05-18_96dd67f61a1bb.gif"></figure>&nbsp;STEP 7-ASSIEMAGGIO STEP 5 E STEP 6-CORONA SUPERIORE<figure class="image image_resized" style="width: 52.87%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-05-18_959c30a0e78b4.gif"></figure>&nbsp;STEP 8 (FINE)-ANELLO SUPERIORE-VITE (x 3 pezzi)<figure class="image image_resized" style="width: 50.83%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-05-18_1ebd86754979c.gif"></figure>&nbsp;<h2 style="text-align: center">BASE REATTORE ARC MK1</h2><figure class="image image_resized" style="width: 65.34%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-06-02_ed19e7b5a87ce.jpg"></figure> REACTOR BASE COMPONENTS:-PIATTAFORMA-RIDUZIONE-TUBO BASE-BIG VITE-DISCO SCRITTE-SCRITTE&nbsp;COLORS USED:-Grey-Black&nbsp;ASSEMBLY STEP TO STEP:STEP 1 (CLUTCH ASSEMBLY)-DISCO CON SCRITTE-RIDUZIONE<figure class="image image_resized" style="width: 50.14%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-05-26_3515a4fd55e3e.gif"></figure>&nbsp;STEP 2 (SCREWED MORE INSTALLATION)-PIATTAFORMA-BIG VITE-TUBO BASE<figure class="image image_resized" style="width: 49.86%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-05-26_23c1d603412a6.gif"></figure>&nbsp;STEP 3<figure class="image image_resized" style="width: 62.52%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-06-02_5b40963220172.gif"></figure>  If you want to put up with my work and help me design more: https://www.paypal.me/carmelomontalto88&nbsp;This project gave me a lot of satisfaction. Available for any questions.Good Print from MC2 PROJECT 3D

Reattore Arc MK1 (LED Lamp Kit-001)

Movies

vandragon_de

I had long intended to print the Statue of Liberty in 1:1000. Since it is one of the strongest symbols, which was also very important in the time of the Ocean Liners. For many immigrants it was the symbol of freedom and the first desired image which indicated the end of a long journey.Here in two versions for download, once in 1:1000 and in 1:700.

Statue Of Liberty / 1:1000 / 1:700

LayerModels

Stunning sculpture of a life sized hand in a bionic style. An eye cathing art piece that truly shows the capabilities of 3D printing. Display on a shelf or mount it to a wall using the bayonet wall mount system.<ul><li>File includes left and right hand</li><li>Part is scalable (tested up to 50%)</li><li>No support needed. </li></ul>If you like my designs you can support me by downloading other poses <a target="_blank" href="https://cults3d.com/en/design-collections/LayerModels/bionic-hand-art" rel="nofollow noopener">HERE</a>&nbsp;<a target="_blank" href="https://cults3d.com/en/design-collections/LayerModels/bionic-hand-art" rel="nofollow noopener"><img src="https://media.printables.com/media/prints/633834/rich_content/56f8342b-1017-4195-98a5-f58b66cbb36a/3d-hand-poses.jpg#%7B%22uuid%22%3A%226c97b809-922e-4648-855f-51f2e99b67ff%22%2C%22w%22%3A2000%2C%22h%22%3A2000%7D"></a>&nbsp;3D PRINTING SETTINGS&nbsp;Tested in PLA with standard print profile. Use sufficient cooling for the overhangs. Brim advised for increased adherence to the print bed.----------Subscribe to <a target="_blank" href="https://patreon.com/LayerModels" rel="nofollow noopener">my patreon</a> if you are interested in a license to sell your prints commercialyFollow me on <a target="_blank" href="https://www.instagram.com/layermodels/" rel="nofollow noopener">instagram</a> to stay up to date with my latest 3D Models

Bionic Hand art - Standard

home

BrandedAbstract3D

I just wanted to drop you a quick note of thanks and share a link to the creator that inspired this phone holder. The incredible <a target="_blank" href="https://makerworld.com/en/@StepanK" rel="nofollow noopener">@StepanK</a> here on Maker World. Your original creation sparked some creativity on my end, and I ended up doing a simple remix of it. Go checkout all of his new Maker World creations. His work has been a fantastic source of inspiration, and I&#39;m happy to honour that by sharing what I&#39;ve come up with. Thanks again for sharing your creativity with the world.&nbsp;Wanna Sell This and Other Items? Check out my Patreon for a commercial license. <a href="patreon.com/BrandedAbstract3D" rel="nofollow">patreon.com/BrandedAbstract3D</a>&nbsp;Phone holder designed to resemble a Recaro Racing Seat, unique and functional, great for any space. It&#39;s a top conversation starter for anyone who loves cars. Always adds a touch of car scene to your surroundings.&nbsp;To complete the phone holder you&#39;ll need:<ul><li>1 x Seat (printable)</li><li>1 x Roll Cage (printable)</li><li>2 x Support Struts (printable)</li><li>8 x M3 Screws</li></ul><h3>Print Settings</h3>I usually go for the BBL “Standard” 0.20mm settings. It seems to strike the right balance between quality and speed compared to other profiles. I&#39;m a fan of the consistent layer height of 0.2mm, but variable layer height is good too! Feel free to play around with the print quality settings to see what works best for you. I&#39;ve had success with BBL Filaments and various other brands, but for Silk PLA, slowing down the outer walls to around 50mm/s seems best.&nbsp;<ul><li>Seat: Use a 10% grid infill—it&#39;s sturdy enough to hold a phone. I used to two bottom shell layers; once the support struts are fitted, the seat base doesn’t touch the tabletop. And, I set the seam position to “back”. I’ve found it looks more intentional, and you kind of forget it’s there!</li><li>Roll Cage: A 0% infill will save print time and is still pretty strong, even for two perimeters.</li><li>Support Struts: Use a 15% grid infill. This part is mostly top and bottom shell layers, but a good scaffold is needed for the top layers to build on. Important: set the top surface to 50mm/s for a smoother finish! You could turn on ironing, but I prefer seeing some industrial layer lines.</li></ul><h3>Assembly</h3>Assembly is a breeze! You&#39;ll get it from just looking at the photos. Insert the M3 screws into the holes and tighten all parts together. Avoid screws longer than 10mm to prevent them from sticking out of the holes in the roll cage. It won’t break anything, but you’ll see the backs of them protruding.&nbsp;Happy Printing!&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/ba3d" rel="nofollow noopener">Buy Me A Coffee</a> ☕(Appreciated but absolutely not required)

Recaro Racing Seat Phone Holder

Games

Tela Workshop

I designed these to hold dessicant underneath filament rolls in a Sterilite 20Q container. I know alot of people just throw loose dessicant in the bottom of their containers, but I wanted them to be more contained than that. I split the dessicant containers into two pieces, which allows you to print a hygrometer holder, or dessicant container. I do not put dessicant in the hygrometer half, in order to not distort the readings. I&#39;ve also included a simple stand that you can use to hold the containers vertical while filling, and a funnel that screws into the opening.

Filament Box Dessicant Container - Sterilite 20Q

Printer

Nils Kal

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/377912/2023-08-24_d8isth83q5cb.png" alt="NK"></figure><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/377912/2023-08-24_jeh5ijkl8akh.png" alt="banner"></figure> I'm currently playing death stranding on my PC and came up with the idea of recreating the „Odradek“ scanner as a desk light so I'd like to present you the "Desk Stranding" lamp (thanks to reddit user u/Typh_R who came up with the name). This is one of my biggest projects so far with a total of 37 parts needed (30 individual parts). I only used screenshots to recreate the original look as close as possible with keeping the printability in mind. I ended up with 4 different .3mf's, divided into their color style. All parts won't require any supports and you also won't need an MMU for this project, all color changes are layer based. There is a bit of assembly required, you'll find everything that's needed below!You can also use this as a cosplay prop if you are using batteries or a powerbank as the power source, there is still some space inside the main body for small power sources. All parts are labeled with a version number so you can easily detect any future changes! <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/377912/2023-08-24_rb1gk5guxth2.png" alt="Manual"></figure> &nbsp;Note: Two lights are flipped in some pictures, the final version has got the correct original look!<h3> </h3>&nbsp; Features:<ul><li>Fully FDM compatible with no supports needed</li><li>On/off switch</li><li>Invisible wiring (wire channels through the hinges)</li><li>All lights are fully adjustable</li></ul> Hardware needed:<ul><li>0.25mm² wires (About 2 meters red and black)</li><li>Switch (21x15mm [punch hole is 13x20], standard size, like <a target="_blank" href="https://www.aliexpress.com/item/32921026422.html?spm=a2g0o.productlist.0.0.1c5313ce9bHl4M&algo_pvid=6a672913-6609-4980-9225-2778fcda0396&algo_expid=6a672913-6609-4980-9225-2778fcda0396-35&btsid=f061563d-0e5d-4e64-9179-2874cbf4c177&ws_ab_test=searchweb0_0,searchweb201602_6,searchweb201603_55" rel="nofollow noopener">this</a>)</li><li>Soldering tools</li><li>LED Strips</li><li>1x LED Diode Blue</li><li>Power Source</li><li>10x M3x4 Screw</li><li>15x M3x12 Screw</li><li>5x M3x20 Screw</li><li>21x M3 Nut</li><li>5x M4x20 Screw</li><li>5x M4 Nut</li></ul> Installation guide: <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/377912/2023-08-24_1zgcvcaj35py.jpg" alt="Qries"></figure>Click <a target="_blank" href="https://drive.google.com/file/d/1xE0kxJmfiwEKIVhW-_Ozk4rUgfkIppxT/view?usp=sharing" rel="nofollow noopener">here</a> for a detailed instruction manual (pdf file). This design is still subject to change so check back again for updates (I already made some changes after taking the pictures so they might differ from the printed version).Have fun with the lamp! As bonus, here is a little stop motion animation from the lamp in action:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/377912/2023-08-24_sl2qsjg41wfo.gif" alt="Buddy"></figure> +++++++++++++++++++++++++++++++++++++++++++++++++ &nbsp;If you like this file or need some adjustments feel free to leave a comment. A rating or tip is also welcome and may check out my other designs! Happy printing!&nbsp; <figure class="image image_resized" style="width:7.73%;"><img src="https://makerworld.bblmw.com/makerworld/draft/377912/2023-08-24_y0rwyb5nz7o3.png" alt="NK"></figure><h3>Print instructions</h3><ul><li>All parts are optimized for FDM printing.</li><li>Please use a 0.4mm nozzle (or smaller).</li><li>I advise to use the .3mf (or gcode) files, as all parts are already aligned and ready to print. However, I’ve provided all .stl files as well!</li><li>Print in PETG for better durability</li></ul>&nbsp;&nbsp;This work is licensed under the 'Creative Commons NonCommercial' license. Please do not sell any physical or digital copies of it.

Desk Stranding - The Death Stranding Desk Lamp

Lamp

christianselig

This is a stand for the Apple Vision Pro I made out of a desire to have a compact, vertical stand for my desk and being unable to find one available that did that. You can either print the included rod, or use a dowel of your own choosing that is 0.75" and 215 mm in length (using something fun like walnut, brass, copper, or steel can add a cool look!). It uses four 6 mm rubber feet on the bottom.&nbsp;This is for my 23W light seal model, I'm admittedly not sure how other sizes work with this. Might need to scale the pringle up/down.&nbsp;I printed mine on a Bambu P1S with white marble PLA filament (also from Bambu). I recommend binding all the pieces together with superglue.&nbsp;This is a stand I made for fun in Fusion 360. If you print this and something bad happens I do not take responsibility. You are free to distribute/sell this physically if you would like, but please do not distribute the software files on any other site.

Apple Vision Pro Stand

Apple

<h2>I am pleased to present you the wind-up motorboat</h2>I have wanted to build a boat like this for some time and make it available to others. Unfortunately, it was difficult to recommend a favourable source for the wind-up motors to others. I am therefore delighted that this small hardware kit has finally made this possible.   <a target="_blank" href="https://eu.store.bambulab.com/de/products/boat-model-components-kit-010" rel="nofollow noopener">Boat Model Components Kit 010</a><a target="_blank" href="https://eu.store.bambulab.com/de/products/boat-model-components-kit-010" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/803890/2024-04-02_1e31c19f470e3.jpg"></a>  The model itself is very simple, only 4 parts and only one that should be glued out, as another mounting option would have made less sense here. But even without the lifebuoy the model would work very well.&nbsp;The video shows the assembly in short form.<figure class="media"><div data-oembed-url="https://youtu.be/6EBTQR9vD9E"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/6EBTQR9vD9E" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure><h3><a target="_blank" href="https://youtu.be/6EBTQR9vD9E" rel="nofollow noopener">https://youtu.be/6EBTQR9vD9E</a> For all those who use the STL file</h3>For all those who use STL files and not the 3mf file, where the infill has already been adjusted to the necessary centre of gravity, I have attached a small schematic picture here, where you can create the necessary centre of gravity yourself by cutting the model and the different infill.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/803890/2024-01-11_5613a73facb46.jpg"></figure>&nbsp;You can find a display stand for the boat here, but unfortunately not currently for the A1 Mini as the radius is too large. <a target="_blank" href="https://makerworld.com/en/models/409582#profileId-311494" rel="nofollow noopener">Base wind-up motorboat</a>  <img src="https://makerworld.bblmw.com/makerworld/draft/803890/2024-04-02_26b1d965f936d.gif">&nbsp;