模型科学

项目现已开源，允许进行二次创作，但严禁用于商业用途。 若有需求，我将上传多色打印版本。&nbsp;打印配置仅作参考，烦请自行进行测试。 The project has been open-sourced. Secondary creation is allowed, but please do not use it for commercial purposes. If there is a need, I will upload the multicolor printing version. The printing configuration is for reference only. Please test it by yourself.

Frieren  フリーレン 芙莉莲 Chibi Figure

Frieren

DGs 3D-PRINT

<h3>Biologische Schneckenfallen ohne Chemie</h3>Schneckenfalle BierfalleGiftfrei Schneckenabwehr Pflanzschutz für Garten Gemüse&nbsp;Die gefräßigen Tiere haben es vor allem auf die jungen Triebe von Salaten, Kohlsorten, Erdbeeren aber auch von vielen Zierpflanzen abgesehen. Schon eine einzelne Schnecke kann einen so großen Schaden verursachen, dass die befallene Pflanze abstirbt.&nbsp;Die Bierfalle macht sich herkömmliches Bier als Lockstoff zunutze: Vor allem Bierreste (abgestandenes Bier) verströmt für Schnecken einen betörenden Duft, der die Kriechtiere von weit her anlockt! Also Vorsicht: Planen Sie die Lage der Schneckenfallen gut, damit Sie nicht zusätzliche Fressfeinde ins Gemüsebeet locken.&nbsp;&nbsp;

Schneckenfalle Bierfalle

Garten

Hrbecek

Simple decor for easter, use arachne walls for better results.&nbsp;Enjoy

Easter decor collection

Ostern

domi-dns

Halter für <a target="_blank" href="https://makerworld.com/de/models/122523#profileId-131992" rel="nofollow noopener">Illidan's Warglaives of Azzinoth - World of Warcraft - Heroes of the Storm</a>&nbsp;Simple and fast print, No supports needed.&nbsp;&nbsp;Post Your Makes / Follow Me / Check my Other Models :)&nbsp;&nbsp;&nbsp;

Halter für Illidan's Warglaives of Azzinoth

Warcraft

ceza-onay

nazgul

Lord of the Ring

BaLuCZ

<h4>Summary</h4>Fan art for StarCraft.Check it out on deviantArt: <a target="_blank" href="http://fav.me/d375yif" rel="nofollow noopener">http://fav.me/d375yif</a>&nbsp;&nbsp;The author is <a target="_blank" href="https://www.thingiverse.com/keyan3d/designs" rel="nofollow noopener">https://www.thingiverse.com/keyan3d/designs</a> Source : <a target="_blank" href="https://www.thingiverse.com/thing:669601" rel="nofollow noopener">https://www.thingiverse.com/thing:669601</a>

StarCraft Terran Symbol

StarCraft

wpetheri

Started buying spices in bulk and needed a shaker for them. The lid is tight after printing but you want it to be so it doesn't come off whilst dispensing salt or pepper. Fit the lid and remove it a few times before use to ease it up a little. &nbsp;Print as is using support on the build plate for the lid. The base prints without supports. As these are only for dried spices I wouldn't worry too much about the food grade filament side, but if you want to be cautious print with a food safe filament.

Salt and Pepper Shaker

Kitchen

R C 3D

PRINT PROFILES: The following are the only print profiles tested and approved by me. They are listed by the name I provided in the print profile description. I cannot guarantee the quality of any print profile that hasn’t been uploaded by me.&nbsp;<ul><li>Pokeball Upper</li><li>Pokeball Lower</li><li>Pokeball Top Shell</li><li>Pokeball Bottom Shell</li><li>Pokeball Button</li><li>Pokeball v2</li><li>Pokeball Stand</li><li>Great ball</li><li>Ultra ball</li><li>Master ball</li></ul>&nbsp;SUMMARY: This is a simple pokeball that I designed to print without any additional hardware, and minimal supports. The intent was to make the pokeball as easy to print and assemble as possible, while remaining tough and functional. If you find any issues, leave me some feedback please.&nbsp;Printing/Assembly:If you decide not to use the print profiles, these are the settings I used.&nbsp;<ul><li>Global Settings:<ul><li>6 Wall Loops</li><li>Gyroid Infill</li></ul></li><li>Red and White Pokeball Shell:<ul><li>Enable Supports: Normal (Auto)<ul><li>Snug</li><li>On Build Plate Only</li></ul></li></ul></li></ul>Assembly:The assembly is done by first gluing the top shell and bottom shell to the pokeball internals. There’s a small square tab to help align the pieces. Once the glue is dry, slide a small piece of filament through the hinge while holding the two halves together. Cut the ends flush to the pokeball. I add a drop of glue to the outside pieces of the filament since the center hinge piece is the only one that needs to rotate in order to operate. Finally, glue the button onto the pokeball. There’s a post designed to help align the pieces.&nbsp;The filament piece used for the hinge will be tight, so you might have to take an allen key and hollow out the hole a bit to get it to slide into place.&nbsp;That's all there is to it. Follow my facebook page, RC3D, for giveaways and entry details as well as my latest models.&nbsp;CHANGELOG:&nbsp;UPDATE 12/3/2023:Added great ball, ultra ball, and master ball tops. I only added the top because everything else is the same, so I'll include 3 separate print profiles for these.&nbsp;UPDATE 11/26/2023:Added a guide post for the button, revised the connection to fit better, thickened the shells to prevent the banding, added alignment squares to align the shell and internals, added a stand.&nbsp;INITIAL RELEASE (10/19/2023)I created this model because the other Pokeball models I found either used external parts or didn't operate how I wanted. This one is designed to open and close using the button on the front. The button isn't 100% required to open the ball, but the intent was to make it functional so it just makes the ball pop open freely. The inside has a flat spot to aid in aligning the outer shell and make printing easier.&nbsp;

Fully Printable Pokeball Set

Pokemon

ThreeD-Michael

Very sturdy, carries soap or multiple shampoo bottles.Unlike my other designs, this dish is fixed on the back. Fits 18, 20, 22 and 25mm shower rails. Versions for left and right mounting available.Easy to print and easy to mount.&nbsp;There is the option of screwing in a hook for washcloths or other utensils on the underside of the box.&nbsp;Note:If none of the download options fit your shower rail, you can scale all parts of the next suitable variant in the slicer. The scaling percentage is calculated as follows:[desired diameter] / [diameter of used download option] * 100&nbsp;Assembly:Please follow the scheme above (last picture).The hook attaches with a screw thread, and depending on your print configuration, once tightened, it may not line up as properly as in my photos. This can be corrected in a number of ways:<ul><li>if the hook rotates too far, it can be fixed in the right position with some glue in the thread,</li><li>if the hook does not rotate far enough, sanding down a few hundredths of a millimeter at the end of the screw may help,</li><li>another alternative would be (when printing the hook) to vary the "X-Y Contour Compensation" parameter in Bambu Studio by a few hundredths of a millimeter for a tighter or wider fit. </li></ul>

Sturdy soap and shampoo dish for your shower

Bath

martin.taichl

This is my model of the Puddle Jumper from the Stargate franchise. It has retractable engine and weapons pods. No interior though. It is little bigger, but in scale with my gates.Here you can see a video about the project includin an assembly. Please ignore the colour differences on the model. It needs to be painted anyway ;) <div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=3eFA0s0bt1A"><iframe src="https://www.youtube.com/embed/3eFA0s0bt1A" frameborder="0" allowfullscreen=""></iframe></div>&nbsp;Enjoy.Category: Vehicles

Puddle Jumper from Stargate

Star Gate

3DMN

If you appreciate my work, give it a like, and if you love it, consider buying me a coffee to show your support! <a target="_blank" href="https://www.paypal.com/donate?hosted_button_id=BC7SWTMZG92TG" rel="nofollow noopener">https://www.paypal.com/donate?hosted_button_id=BC7SWTMZG92TG</a>&nbsp;&nbsp;Check out my other Hogwarts model: <a target="_blank" href="https://makerworld.com/en/models/134009#profileId-145435" rel="nofollow noopener">https://makerworld.com/en/models/134009#profileId-145435</a> &nbsp;&nbsp;Step into the enchanting world of Harry Potter with our meticulously crafted Hogwarts Castle model! This exquisite replica captures the magic of J.K. Rowling&#39;s wizarding world with precision and attention to detail, making it a must-have for every Potterhead.&nbsp;Standing at an impressive x200 y185 z104, this Hogwarts model is a true testament to the grandeur of the iconic wizarding school. Every turret, tower, and spire has been faithfully recreated, allowing you to bring the mystical charm of the castle into your own space.&nbsp;Whether you&#39;re a collector seeking the centerpiece of your Harry Potter memorabilia or a fan looking to add a touch of magic to your home, Immerse yourself in the wizarding realm and marvel at the intricacies of the magical world with this stunning representation.&nbsp;&nbsp;

Harry Potter Hogwarts

Harry Potter

<h4>Print used around 0.9kg of PLA with 100% height: 40 cm 0.4mm nozzle 0.2mm layer height 4 walls 10% gyroid infill 8 top, 6 bottom layers</h4>

Brick Giant Skeleton

Halloween

Lego

Random

Well since everyone knows, this is the year of the dragon, so this is my dose of nostalgia to share with the community. I was inspired by 2 pictures I found in pinterest, but i could not find the direct tag for the artists so please if you know them, let them know that i made this tribute for them, you can see the inspiration in one of the pictures. I tried to optimized as much as possible the parts to print, feel free to remix it and share it with the world.

Baby Shenrong

Dragonball

Jorge Rui

This design is free for the benefit of the community, but If you like my designs and want to contribute, you can make a donation to <a target="_blank" href="https://www.buymeacoffee.com/designrepcom" rel="nofollow noopener">buymeacoffee </a>or <a target="_blank" href="https://www.paypal.com/donate/?business=BUM67EMDJRXSN&amp;no_recurring=0&amp;currency_code=EUR" rel="nofollow noopener">paypal, </a>that will be greatly appreciated.&nbsp;<h3>Introduction</h3>In the first use of the AMS of bamboo, I found that the humidity level was very high, so I put all the bags of silica I had inside it, and try to solve the problem. After having dried all my material in an oven at 60ºC, yes, I know it is dangerous, but the truth is that it worked, and put it back on the AMS.The silica bags remained on the AMS, giving a horrible look to a piece designed with so much care in mind...You can see my first solution <a target="_blank" href="https://www.reddit.com/r/BambuLab/comments/153qohm/my_dream_team_the_x1c_combo_is_the_new_upgrade/?utm_source=share&amp;utm_medium=ios_app&amp;utm_name=ioscss&amp;utm_content=1&amp;utm_term=1" rel="nofollow noopener">here</a>, not good at all. Checked where I could &#34;hide&#34; the silica, but none of the ideas satisfied me....Eventually, the extra desiccant will no longer be needed. But in the meantime, the best place will be inside the spools. In this case it can accompany the spool when I put it in outside the AMS, when no longer need it.This design was good and elegant: <a target="_blank" href="https://www.printables.com/model/65922-silica-gel-spool-container," rel="nofollow noopener">https://www.printables.com/model/65922-silica-gel-spool-container,</a>I analyzed it and, re-created it from the ground-up to meet my construction and tolerance requirements. I share my work with this great community.&nbsp;This is an excelente complement for the <a target="_blank" href="https://amzn.to/3UZiEJO" rel="nofollow noopener">Sunlu S4 filament dryer </a><img class="image_resized" style="width: 27.93%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000013098/design/2024-05-26_1ebe389b9fef5.png"><h3>Note</h3>After some requests I&#39;ve made one with the mini thermometer/digital hygrometer embedded in the lid. For now is only available for members of my club in <a target="_blank" href="https://www.printables.com/model/598697-desiccant-container-for-spool-with-thermometer-hyg" rel="nofollow noopener">printables.com</a>.<figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000013098/design/2023-09-30_508077f273c79.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000013098/design/2023-09-30_a3ec384a6589b.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000013098/design/2023-09-30_f2377218e8c38.jpg"></figure></td></tr></tbody></table></figure><h3>Change log:</h3><ul><li>(20-07-2023) - Added an updated version, that I think it will be easy to print, removed the fillet on the Cap, and added a conic fillet on the bottom on the container (last image).</li><li>(09-09-2023) - Complete reconstruction of the model. The openings are now narrower for better bridging. the logo is embedded on the lid. File pre-configured for bambu studio</li><li>(29-09-2023) - Added step files.</li></ul>

Desiccant container for Spool

Bambulab

Imperius

I find your lack of faith disturbing!&nbsp;&nbsp;&nbsp;